Generator Stator And Rotor Core

Resin Glass Banding Tape

Glass Banding Tape (also known as Armature Banding Tape, Resin glass Tape, Fiber Banding Tape, Polyglass Tape) is a high strength non-woven glass tape used for banding of rotor, armatures and transformer core. It consists of high strength glass yarns laid parallel, impregnated with special high temperature thermosetting polyester resin. During cure, the resin flows and fills the voids and air spaces to produce a homogeneous laminate with a smooth resin surface.

JAY INDUSTRIES is dealing in Resin Glass Banding Tape for more than 25 Years and are catering to vast Indian Domestic Market as well as Exporting to many countries of the World.

Applications Of Our Resi Glass Tapes
As a winding restraint on traction armatures, generators other rotating machines & transformer core binding.

Other application where high tensile strength and insulating properties of the product can be made use of.

Features

High Thermal Resistance of upto 200oC. Short period of heating upto 260oC may be tolerated, whereas solder may melt on steel wires.

Very high Arc Resistance thereby minimizing the possibility of â??flash overâ?? which has often been a problem with steel bands.

Resistant to humidity and corrosion.

Smooth cured surface on application of banding tape reduces dirt adhesion, which might otherwise lead to tracking failure.

Non-conducting material, hence eliminates insulation as required under steel banding.

Prevents Lashing banding tape bands gone far in eliminating the extreme damage caused by lashing wires & lifting armature coils experienced when steel bands break.

Composite material Banding Tape is supplied in a semi cured soft balanced flat ribbon of glass yarn & high temp. polyester resin. Thus ensuring that each yarn bears a distributed share of load. Banding Tape forms a high strength loop, holds the coil in place against centrifugal forces and has a high safety factor, once suitably applied under requisite winding tension & cured to recommended cycle. Supports weight reduction as compared to steel banding wire.

Sizes Available in Ex-Stock:

Width : 20 mm (3/4), 25 mm (1), 38 mm (1) & 50 mm (2).

Length: Roll of 100 Meter / 200 Meter.

Feature and opinion of Conical horizontal sand mill machine

1.Design of large capacity conical grinding chamber is more suitable for dispersion and superfine grinding of medium and high viscosity products in large quantities.

2.Grinding beads in the conical chamber flows in a linear way,enabling distribution to be more uniform.

3.Stator,rotor and front-end panel are cooled,which expands cooling area and prevents high temperature.

4.Special separation system,giving freedom in the choice of bead size.

5,Spare parts in the grinding chamber allow contacting materials that are made of special high abrasion resistant materials,making the machines more durable.



Technical parameter

Model:LZM-30L

Chamber Volume:30

Motor Power:18.75

Output Capacity:180-1000

Medium Size:0.6-2.0

Gross Weight:1200

Dimension:1820*1165*1730


Model:LZM-45L

Chamber Volume:45

Motor Power:33.75

Output Capacity:200-1500

Medium Size:0.8-2.0

Gross Weight:1700

Dimension:2000*1400*1880

Packing tape

Cold-resistant, strong remedial and make-up capability;
Widely applicable to general sealing, assembly and fixing.
Colour: transparent, dark brown(5k), brown(3k)(2k),
Yellow(0k), coloured
Length: max.1000metres, min.30metres
Width: 72mm, 60mm, 55mm, 50mm, 48mm,
45mm, 36mm, 24mm, 12mm
Diameter of inner paper core: 38mm, 76mm

Circulating pump oil seal 919772
Dongfang Yoyik is specializing in the production and supply of spare parts of power plant steam turbine, generators, can provide from customized parts to finished factory product. The company regards "scientific management, continuous improvement, quality excellence, customer needs" as the quality of the enterprise policy, and in 2008 passed the ISO9002 quality system certification.

#DF-Circulating pump oil seal 919772-DF
gate Z41H-40I
solenoid valve AS32060a
Proportional valve for Nuclear units KHDG5V533C80NXVMU1H120
butterfly valve K125DOF4PB3
Fluorine rubber ring C8689543
Stator cooling water pump mechanical seal DFB 80-50-220
Accumulator bladder NXQ-N-40
CONTROL OIL RELIEF VALVE DBDS10G10/5
The electromagnetic valve 4WE6D62/EW230N9KX/B08
Hydraulic accumulator bladder & Seal kit NXQ-AB-80/31.F
Gas turbine connectors 420DA002B1401
relief valve MK50HP-2
sealing ring HB4-56J8-38
globe valve HY-SHV25.01Z
Electric stop valve J961Y-25V 12Cr1MoV
bladder kits 28L �?290mm*860mm
Electromagnetic valve coil CNAC-02323-110V
Check valve H61H-250 SA-105
solenoid valve AM2206A-220VDC-V170N 30W
EH oil cooling recirculation pump 2PB26DG28PI-V-VS40
Sewage oil pump 2CY-12/0.67
Accumulator bladder and seal NxQB-10/20-F-E
Intermediate oil engine seal kit DF.YDJ.MFTJ.ZT.135.HNKY
MOOG 730-4229B
Main inlet valve solenoid valve R900929121
relief valve 1 1/2"LOF-98H
SOLENOID VALVE 8210G089 220VAC
Main engine oil cooler gasket NT250H B-10 216
motorize valve Sr03GB32046A4
Sealing oil pump of steam turbine generator ACG045N5IVBP
sealing ring TO-136/MF-177
gate Z561Y-1500LB
The electromagnetic valve D3DW20BVZP40XB5
High pressure ball valve W-BKH-25SX4-20-11251
Manual pressure regulating valve EXCELON B72G-2GK-QD3-RMN
Oring A156.33.01.10-13X1.9
Circulating pump oil seal 919772

ZYR-DFYL-2025-3-12

Mechanical seal DF100-80-230
It is YOYIK special sale. Deyang YOYIK power spare parts service is committed to thermal power plants, hydropower station spare parts production and supply. Long-term for the power plant to provide a large number of steam turbine spare parts, turbine generator spare parts, boiler spare parts, turbine spare parts accessories, water turbine generator spare parts, generator cover plastic seal, steam turbine cylinder head high temperature sealant, Oil cooler, mirror plate, steam turbine heating rods and other power plant spare parts spare parts. Welcome to inquire

Yoyik can offer many spare parts for power plants as below:

#DF-Mechanical seal DF100-80-230-DF
gasbag NXQ-4/20-H
solenoid valve AS32060b
Servo valve ABEX425-1607
Safety valve A41H-40
actuator oil-feeding globe valve SHV12
Rexroth plunger pump coupling A10VSO100DR/31RPPA12N00
Sealing ring Q/3A4-93J8-17
Stop valve J61Y-2000CL
O-shaped sealing ring HB 7519-3.55X212
plug YZD25LG-7-37
bladder 20 Liter 200 Bar
AC lubricating oil pump 125LY-35-16
non-return valve S10P5.0
sealing ring OR-085-V
Fluid coupling YOXIiz500
Oil supply pump 80AY50X10
Servo Valve E-RI-TE-05H 41/DH07SA\DN6
gear pumps PFG-214/R0
solenoid valve 4WE6D6X/EG24NZ4
Electric regulating valve T962Y-200
pressure relief valve YSF9-55/50-KJTA
Pressure pipe joint 1/2*M20*1.5-14(SAFELOK)
Machinery Seal BF108-45u
mechanical seal DLZB820-R64A
pressure hose SMS-10/N1/4-305mm-C
Oil unloading pump 2G116-190
UNLOAD VALVE 0508.919T0102.06AW DB24
air side sealing oil pump core HSNS210-42
Diaphragm metering pump GM-0050
sealing ring HB4-56J8-20
Electro-hydraulic servo valve with middle valve MOOG72-1202-10
solenoid valve J-220VAC-DN10-D/20B/2A
AC lubricating oil pump for small machines 80LY-80-1
Electromagnetic directional valve DG4V-5-2ALJ-VM-U-SA6-20
O-ring HZB253-640-02-01
jacking oil pump A3H37-FR01KK-10
Mechanical seal DF100-80-230

ZYR-DFYL-2025-3-10

Product Introduction:
Volatile Corrosion Inhibiting (VCI) Film is the core technical product of Suzhou Keysun Company, and has passed the testing of Chinese Academy of Sciences, Wuhan Research Institute of Materials Protection and SGS, etc. It is a kind of corrosion inhibiting film produced in the co-extrusion method. When Keysun VCI film or VCI bag is used in the metal product packaging, volatile corrosion inhibitor gasifies in the constrained space and agglomerates on the metal surface, including holes, hollows, gaps and other inaccessible surfaces, forms a gas-phase protective layer, so as to prevent the metal products from corrosion. It is in compliance with the National Standard of the People's Republic of China, American Mi litary Standard MILB22019C and MILB22020C.

Product Advantages:
1.Be applicable to the corrosion inhibition of black and nonferrous metal
2.Transparent and beautiful, easy to observe the status of the packaged
3 . The protected me t a l needs no surface pretreament
4.Environmental protective, innocuous, completely recoverable
5.Convenient for use, simple procedures, economical and practical
6.Double functions of corrosion proof and damp proof.

Typical Physicochemical Characteristics:
Appearance: transparent film
Color: grass green, yellow, blue, etc.
Thickness: 0.03mm~0.25mm
Term of corrosion inhibition: more than 2 years.

Commended Purpose:
The corrosion inhibition of aviation fittings, engines, auto fittings, components and mechanical
equipments in storage and transport.

Application Method and Attentions:
1.Make sure the packaged content free from corrosion when packaging
2. Keep the packaged content clean and free from any foreign matter or finger mark before
packaging
3.Keep a dry environment and the operators shall wear gloves at packaging
4.The product shall be treated with anti-corrosion process after the completion of production; and
the product temperature shall not higher than 50íµ before packaging
5.For VCI packaging, the most important proceeding is closed packaging; the tightness shall not
less than 95%
6.The space between VCI packaging film and packaged content shall not exceed 25cm
7.The corrosion inhibiting package shall be applied. If the size or interior and exterior superficial
area of content is too large or the environment is too wet during packaging, the assistant corrosion
inhibiting additives, such as VCI powder, corrosion inhibiting drier, etc., shall be used inside the
package. (Generally 1m space requires about 100g VCI powder.).

Very good quality wrapping film suitable for all type of palletize and carton and cargo protection. It has very good stretch ability and punching resistance power suitable for hand wrapping or automatic wrapping machines.

General specification : Width :500 mm Inner core dia : 2 inches and 3 inches APR, Thickness : 23 micron. Length & Weight : As per customer Request :

Packing : hand use 6 pcs/ctn Machine

Product origin : UAE

Key Specifications/Special Features :

Different micron with different performances can be available

Supply the most suitable micron according to customer requests.