Carbide Burs

1. Refer the carbide blanks , we adopt yg7, (7%cobalt) , this grade is kennametal gave us this grade , that's why we also supply the carbide blanks to kennametal , yg1

2. Anyway , until now , the all customers whatever in usa, canada , or japan, italy are satisfied with the quality of our burrs.

3. Our machines are five-axis cnc that much better than others' 3-axis cnc

4. Original material (tungsten) not recyclable powder

5. Adopt the lucas-milhaupt for braze , 35 crmo alloy steel for shanks.

6. Silver brazing£¬grade is bag24£¬welding temperature is 680-730¡æ

7. The best quality , the longest lifetime in china recently.




Cartons or plastic case

Carbide Burs

Osseous ENT Burs are designed for giving the flexibility to treat a wide range of ENT conditions and anatomies from precise excision in delicate areas to rapid removal of large and bulky lesions.

Design Benefits:

Used to cut, drill and polish the bones
Heavy material removal
Easier, more thorough bur cleanup
Lower temperatures during use
Centerless ground for better balance
Less stress on handpiece and surgeon

Length : 70 mm

Metric size tungsten carbide burs are available upon customes request.
SYNDENT tungsten carbide burrs produced with high quality types of carbide and modern CNC grinding machines.
Our rotary burrs are brazed by the advanced welding equipment automatically. Silver brazing materials are imported from USA.
Carbide burrs manufactured to your drawings to meet your demands of particular stock removal.
We can make chemical and geometry analysis for your carbide burs material and make grinding test in our professional laboratory center.
SYNDENT tungsten cutter can be coated with TiN, TiCN, TiALN and LTE.
OEM of many famous huge companies in the world for our carbide cutter.

1. dental carbide bur:
HP shank (ISO 104), diameter 2.35mm (3/32"), suitable to all low speed handpiece
More than 180 types of dental carbide burs for choice, most popular shapes are included. They must satisfy all your applications of dental laboratory, jewellery and podiatry.
Different kinds of cutter types range from super coarse cutters to coarse cutters, medium cutters, fine cutters and extra fine cutters.
Special kits of dental tungsten carbide cutters are OEM available by dental technicians and other demands.
2. FG carbide burs
FG carbide bur, shank (ISO 314), diameter 1.6mm, suitable to all high speed handpiece
All dental bur is produced by Germany raw material and technology
Laser welding
All FG carbide burs are manufactured by CNC grinding machine automaticall
3. RA surgical carbide burs
RA surgical carbide bur, shank (ISO 205), diameter 2.35mm (3/32")
All dental bur is produced by Germany raw material and technology
Laser welding
All RA surgical carbide burs are manufactured by CNC grinding machine automatically.

HP shank (ISO 104), diameter 2.35mm (3/32"), suitable to all low speed handpiece
More than 50 types of nail carbide burs for choices, most popular shapes are included. They must satisfy all your applications of nail beauty and podiatry.
Different kinds of cutter types range from super coarse cutters to coarse cutters, medium cutters, fine cutters and extra fine cutters.
Special kits of nail treatment are OEM available by your special demands.

Tungsten Carbide Dental Burs Description
Tungsten carbide dental burs are manufactured from a single piece of tungsten carbide (TC) or from a TC tip brazed onto a surgical steel stem. The range includes patterns designed to meet the needs of all surgery and laboratory applications.

Tungsten Carbide Dental Burs Applications
Tungsten carbide dental burs can be used to cut or polish a wide variety of materials encountered in dentistry. These include tooth material such as enamel, dentine and bone, dental materials such as amalgam, composite, glass-ionomer cements, polymer and ceramic veneers and precious and not-precious alloys. The bur pattern will be selected to cut a specific material in a specific application and the following table gives guidance on selection.

Safety in Tungsten Carbide Dental Burs Use
Eye protection must be worn to protect against ejected particles.
Surgical mask must be worn to avoid inhalation of aerosol or dust generated.
Inspect the bur for broken flutes before each use and discard defective burs.
Ensure that the bur is fully seated and gripped in the handpiece collet.
Maintain handpieces in good working order and correctly lubricated.
Do not exceed the maximum speeds tabulated above.
Move the bur continuously when in use to avoid localized heating.
Clean and sterilize the burs in accordance with the directions below before first use an before each reuse.

These instructions are applicable to the processing of tungsten carbide, diamond and steel dental rotary instruments before first use and each reuse. Dental rotary instruments are supplied mechanically clean but are not sterile. They should therefore be sterilized before first use. Steel burs are single use devices and the instructions therefore only apply to processing before first use.

Used burs should be considered as contaminated and appropriate handling precautions should be taken during reprocessing. Gloves, eye protection and a mask should be worn. Other measures may be required if there are specific infection or cross-contamination risks from the patient.

With the exception of steel burs, which are single use devices, reprocessing will have little effect on dental burs. The end of life is determined by wear and damage in use and the burs should be inspected for defects during the preliminary cleaning process.

Unless there is specific infection or cross-contamination risks, there are no special requirements for containment. The burs can be transported wet or dry and should be protected from damage to the cutting edges. If transported wet there is an increased chance of staining or corrosion. Prolonged storage in disinfectant solutions may result in corrosion and should be avoided.

according to your drawings or samples.

We produce carbide rod with high quality & very competitive price for 15 years in china; hope to find a way to cooperate with you.
The samples can be sent to you if you need them to test.

1.Quality of carbide threading inserts is equivalent to vargus, but we have good price.



2.All of our tungsten carbide products are made from the high ¡§cpurity original /virgin material, pressed ( extrusion) and sintered but not recycle powder .



3.The samples can be sent to you if you need them to test.



4.Pls check in attachment that pictures of carbide threading inserts.




Plastic case