Vehicle Gps Tracker (Et01)

Specification
Size 39*56*12mm
Working voltage dc:6~30v
Input fuse 2a
Working temperature -40~85
Humidity 10% to 90%
Cpu mt6223(52mhz)

Gsm module
Band:850/900/1800/1900mhz
Tally with: gsm phase 2/2+
-class 4 (2w @ 850/900mhz)
-class 1 (1w @ 1800/1900mhz)
Gprs multi-slot class 12
Gprs mobile station class b
Max rf output: 33.0dbm2dbm
Dynamic input range: -15 ~ -102dbm
Receiving delicacy: class rber2%(-105dbm)
Frequency stability: > 2.5ppm
Max frequency deviation: 0.1ppm
Rms deviation:5deg

Gps module
Gps chip set: jrc g591b
Frequency: l1, 1575.42 mhz
Number of channel: 22
Gps sensitivity:-164dbm
Positioning accuracy: 2.5m
Reacquisition: 0.1 sec, average
Hot boot: 2 sec., average
Warm boot: 38 sec., average
Cold boot: 44 sec., average
Altitude limit: 18000 m
Velocity limit: 515 m/s

I/o port 4 i/o cables
1. Positive 6v-30v. Red wire
2. Negative. Black wire
3. Remote cut off engine power. Yellow wire
4. Acc, engine start detecting. Green wire

Current
Standby current:16ma
Working current:60~150ma
Charging current: max<500ma
Battery lithium battery :130ma( working time is about 1 hours)

Installation:
1. Red wire connects to positive 6v-30v
2. Black wire connects to ground
3. Yellow wire connects to relay device pin86. Pin85 connects to ground. Pin 30 and 87a connect to oil pump line in series.
4. Green wire connects to acc or other alarm devices (that is to connect 6v-24v storage battery or impulse to access acc and alarm mode)

Main features:
1. Real-time positioning & tracking
2. Remote controlling oil & circuit
3. Acc. Engine start detecting alarm
4. Vibration detecting alarm
5. Inbuilt backup battery, unauthorized dismantle alert
6. Gps & a-gps (lbs location based service)
7. Real time uploads location information via time/distance interval.


110 lx90 wx70 h