Cd1, Md1 Electric Hoist

CD1/MD1
Model CD1, MD1 Electric Wire Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes
With slight modification, it can also be used as a winch It is widely used in factories, mines, harbours, warehoused, cargo storange areas and shops, essential in raising working efficiency and imporving working conditions.
Model CD1 Electric Hoist has only normal speed, which can satisfy normal application.
Model MD1 Electric Hoist Provides two speeds: Normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc.
Note:
A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36 meters.
B. The lifting speed can be single speed or double speed, even multi-speed with frequency inverters.
C. The suitable rail for the low-headroon hoist is H-type rail, and l-type rail is also available.
D. The recommended rope reeving of this kind of hoist is 2/1, 4/2 or 4/1.
E. The normal travelling speed is 20m/min, and 12.5, 16, 25, 32m/min by request.
F. The normal rial gauge of the double-girder hoist is 1200, 1500, 1800, 2100 and 2300mm. The mornal travelling speed of this kind of hoist is 20m/min, and 30, 45m/min by request






Wooden case

Electrical Chain Hoist

The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.

The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.

Single girder overhead crane description
Single girder overhead crane runs on an elevated runway system along the length of a factory, the hoist moves the load up and down, and the bridge of the crane moves the load forward and backward. It is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate. It is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set. Widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment.

Single girder overhead crane classification
LDA type single girder overhead crane
* It is widely used in warehouse, plant, material stock to lift the goods.
* Capacity: 1ton-20ton
* Span: 7.5m-28.5m
* Lift height: 3m-30m
* Working with CD1 OR MD1 electric hoist

LX type single girder overhead crane
* It is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse.
* Capacity: 0.5ton-10ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with CD1 or MD1 electric hoist

LDP type single girder overhead crane
* It belongs to very low clearance light duty equipment.
* Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop.
* Capacity: 1ton-20ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with CD1 OR MD1 electric hoist

European type single girder overhead crane
* It compact lifting machinery designed and manufacturing in the strict according with FEM and DIN standard, which is advanced technology and beautiful design.
* Capacity: 1ton-20ton
* Span: 6m-31.5m
* Lifting height: 6m-18m
* Working with European type electric hoist
* Electric Hoist 10 T Overhead Crane Workshop Bridge Crane Lifting System

z

Single Girder Beam Bridge Overhead Crane

European type cranes have such design concepts as small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.
Capacity: 1ton-20ton Span: 6m-31.5m Lifing heihgt: 6m-18m Working grade: A3-A5
Working temperature: -25 to +42 centigrade
Three control methods:
Pendent control: A. Easy operation when obervation. B. Convenient to communication with other workers.
Wireless remote control: A. Greatly improved the work efficiency. B. Keep the operator from danger.
Cabin room control: A.Designed by Man-machine engineering principle
B.The driver seat has adjustable height and rotation.

Product classification
Because single girder overhead crane divides into four types, here are the detailed information, if you are interested in any one, please let us know.

LDA type single girder overhad crane is widely used in warehouse, plant, matrerial stock to lift the goods.
Capacity: 1ton-20ton
Span: 7.5m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 OR MD1 electric hoist

European type single girder overhead crane is compact lifing manchinery designed and manufacturing in the strict accoring with FEM and DIN standard, which is advanced technology and beautiful design.
Capacity: 1ton-20ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with European type electric hoist

LDP single girder overhead crane belongsto very low clearance light duty equipment. Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop.
Capacity: 1ton-20ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 OR MD1 electric hoist

LX single girder overhead crane is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse.
Capacity: 0.5ton-10ton
Span: 6m-31.5m
Lifing heihgt: 6m-18m
Working with CD1 or MD1 electric hoist

LDA type crane is designed basing on LD type.LDA type crane has reasonable structure and strong nigdity.CD1 and
MD1 hoist are used together with this type of crane which is on ligth duty.The electric hoist runs along the lower flange
of the l-steel of the girder to accomplish article hoisting.It features light structure and easy installation and maintenance.
Lift capacity: 0.5- 50t
Span: 6-30m
Lift height: 3-30m
LDA Single Girder EOT Crane match with the CD1/MD1 type Electric wire rope hoist.
Which is the most popular use crane machinery on the market at present.