Plastering machine, mortar spraying pump for traditional plaster mix and for premixed materials also. Mix, pumps and spray. Diesel version and also electric 400V version available. Can pump up to over 30 mts height and 45 mts horizontal. Output capacity up to 60 lts/min. Can reach easily 300 m2 finished plaster per day with a team of 4 - 5 qualified people.
This is a bagged gypsum based which could be directly applied on such materials as bricks, concrete, aerated concrete, etc
Used indoors.
Single layer creates a smooth surface.
Not need satin surface finishing plaster
Easy usage
Economical
High strength
Most favorable light Rendering Speed 80-100m2/h wall plastering machine
Product Description
Introduction of wall plastering machine
Normal work a day can reach 800 square meters, 1000 square meters for the actual site measurement results / day (10 hours), the one-time plastering width 1000mm, high speed and high precision, more time-saving and convenient.
Product Advantages
1. China famous aluminum supplier offer New Aluminum Magnesium Alloy main unit and directional pipes, which is strong and long time used.
2. Original gear rack driving system enable output of main power more peaceful and stable, 25% faster lifting speed than old generation, improve the plastering efficiency.
3. High efficiency and human labor saving, render two plates walls within 2 minutes.
4. Self - leveling System device, which guarantees a perfect and fully automatic alignment, even coating thickness, and wall flatness, more precisely.
5. Remote Control available, easily and safely operate the machine from distance if desired.
6. The uprights(also called poles)are foldable, so it is easily for you to move the machine from room to room, easily through the door, from the room to construction site.
7. Feed cement mortar by dumper directly, which can save 2/3 of the time, improve the work efficiency.
8. Enlarged mortar tank capacity to 100 liters, and enable to plaster wall surface of 4M without adding mortar anymore.
9. Bigger accessible plastering wall surface, decrease the plastering surface to be with rectification by manual labor.
10. Specially designed Plastering Height Control mechanism enables to plaster wall surface under beam, below and above window, corner.
11.Machine can render from both left and right side of wall for there are two small render plates; no limited and very convenient for use.
Good sell and after-sell services: Advanced workmanship, strict quality control, professional packaging and transportation, complete operating manual, professional engineers to go abroad to install, strong after-sales service team, and perfect after-sale service.
Bigger hopper, can use small cart put ash into the hopper, and no need to add ash during machine work from bottom to top and back.
POWER SD 5 READY PLASTERING MACHINE
It is a high-performance ready-made gypsum plastering machine that pumps and sprays all kinds of gypsum or cement-based dry mixes and is used in interior and exterior plaster applications.
Technical Specifications
Machine Type: POWER SD 5
High quality mixing
Easily disassembled and transported
High quality electrical panel application
2 years warranty period â?? Delivery export value package type.
Technical Data
Power Supply 380 V - 50 Hz
Motor Power 5.5 kW
Compressor Capacity 250 liters/min - 5.5 bar
Carrying Capacity * 5-40 liters/min (These values may vary depending on the material used, the pumping height, the consistency of the pumped material, the type of pump, rotor and stator.)
Water pump 50 liters/min - 0.75kW
Transport Distance Horizontal * 40 meters (Standard if needed this will be long - option)
Transport Distance Vertical * 30 meters (Standard if needed this will be long - option)
Reservoir Volume 130 liters
Maximum Weight 285 kg
Product Description
Introduction of plaster machine in uae
SX55 Dry Ready-mix gypsum plaster spraying machine is a new machine widely applied in plastering and almost all the construction projects for materials such as traditional mortar mixed on site, normal mortar, insulation mortar etc. This machine could save much time, manpower and improve efficiency. It has advantages of easy operation, high reliability even spraying mortar and not easy to fall down. L1 and L2 pump cores are small and light enough to be moved easily for working convenience on site. Besides, the simple structure makes cleaning jobs fast and easy and does not require any special working condition. So it is your best choice for mixing, conveying and spraying all kinds of mortar in construction projects.
gypsum plaster spraying machine Application
All pumpable dry ready-mixed mortars or materials, such as Cement mortars, Lime plasters, Gy-psum plasters, Masonry mortars, Insulating plasters , Self-leveling floor screeds, etc.
The machine is a screw-type high-pressure mortar spraying machine, advanced technology. Operation and maintenance is simple, without special training can be skilled operators. Mortar spraying machine is mainly used for building exterior walls, cement mortar spraying and spraying mortar external wall insulation materials, refractory coating.
The dry ready mix plaster machine (SX30) is designed for the application of any type dry ready-mixed mortar based on cement,gypsum and insulating mortar, it is a kind of machine with self-suck water device,mini compressor and rotor devices integrated, The machine consists of portable units,permitting easy and comfortable transport due to their small and handy dimensions and low weights.so the materials are just mixed by the machine automatically and it can supply water automatically,it operates very easy.
The wet mix plaster machine (SPT30) is suitable for spraying the wet ready-mixed motar, and their materials can also be the mixed cement ,sand and water or other available mortas that can be stired. No mater which of the material you use, you should mix them with water in advance .This kind machine also consists of portable units,and the material is sprayed out constinuously and evenly. but because of its special spares, the cost of the later maintenance will be a little higher.
The hose pump plaster machine (SHT38) is working by hose pump,its material just the same as SPT30. And it not only can be used for plastering but also for long distance pumping. Also compared with the wet mix plaster machine,the cost of the later maintenance is lower,but the continuity of the material pumped and sprayed out are not as well as the wet mix plaster machine(SPT30) .
If your material is the ready- mixed mortar, you can choose any kind of the three,
If you want use the cement and sand , you can choose the wet mix (SPT30) and hose pump plaster machine(SHT38).
Or you want to use it both for plastering and long distace pumping, you can choice the hose pump plaster machine(SHT38).
Is there any kind of machines you are interested ? Please let me know, If you don't know which kind of to choose, you can tell me your requirement. for example , your requirement of the composition of the material, the max grain size or the material ratio etc. and i can give you some suggestions.
Automatic cement plastering machine is suitable for the construction industry. cement plastering machine makes rendering easier, faster and effortless compared with manual application. Our plastering machine also can work with different mortar which bring it to a smooth,flat finish with adjustable thickness to suit each application. It is fully automatic rendering with perfect smooth rendering surface, no need to manual leveling jobs. It saves labor cost, materials and time widely used for brick wall, cement wall, internal wall, house, workshop, house, building, skyscraper projects.
