Flux Recovery Machine

MAC-G320 Automatic Mold Flux Feeding Machine



Overview

MAC-G320 automatic mold flux feeding system is a new generation product of automatic adding mold flux, which is independently developed According to different steel grades, casting speed, vibration and other process parameters, then the system can analyze and calculate the accurate mold flux addition amount through intelligent software. Then the system sends out signals to control the mold flux addition process and mold flux addition amount, and designs appropriate nozzles and propellers according to the fluidity of molten steel in the mold and the ductility of mold flux. After the system setting is completed, there is no manual intervention is required. It completely replaces the whole process of manual addition of mold flux, and realizes the automation of mold flux addition.



The features of the system

1. The system automatically controls the amount, process and time of adding mold flux according to the process requirements of automatic mold flux addition, so as to maintain the physical state of the mold flux and prevent it from being broken.

2. The user can match different parameters according to actual needs, so as to change the length of the mold flux feeding time and the amount of mold flux, which can suit for the use of different sections and different casting speeds.

3. The casting speed signal is used and the amount of adding mold flux can be automatically adjusted according to the casting speed. The mold flux can be added timely and evenly, which can improve the quality of the billet and reduce labor intensity.

4. The time is controlled by PLC, no manual intervention is required. The adjustment is very convenient. It has manual, automatic, local and remote control modes.

5. The system has reliable performance and simple structure, and can be adapted to powder and granular mold flux.

6. It has a special anti-blocking nozzle and backflushing design to overcome the phenomenon of pipeline blockage.



The technical parameter

Mold width: 500-2000mm

Mold thickness: 100-500mm

Type: screw conveying type mold flux feeding machine

Heating method: stirring electric heating

Arrangement location: on the pouring platform (with its own wheels to move)

Adding capacity: 0.5 7.5L/min, continuously adjustable feeding tube

Molding flux storage tank 125 L, with material level detection and alarm

Control mode: local/remote control, automatic /manual mode

Molding flux type: granular flux or powder flux

flux adding method: spiral swing adding flux

Casting speed interlock: yes

Mould size setting: yes

Signal transmission: DP/Industrial Ethernet

Function of Solvent Reclaiming Unit :
Calstar Solvent Reclaiming Unit is the machine that works through the method of instillation to reclaim the used solvent into reusable condition. Choosing our Solvent Reclaiming Unit will save you lots finish products cost of using expensive solvent, protect the whole green environment and keep everybody healthy.

Solvents that could be reclaimed:
Isopropyl alcohol, acetone and butanone, days that water, get water to wash, washing Net water, wash mode water, diluent, Banana oil, alcohol, benzene, washing solvent, acetic acid esters, halogenated hydrocarbons, trichloro oxide, trichlorethylene, petroleum solvents.

Treatment low Chart :
Auto parts ,Electronic products, Colored drawing on pottery gold ornament, Precision casting, Hardware manufacture, Movement equipment, Artificial leather, Revertex product ,Coating chemical industry , LED product ,FRP product, Tree ester shoes material , LCD optics product.
Operation principle :separation through evaporation.

Features
This set of A-model is very fast , safe and simple to operate . They work well with most organic sovants popular in today's industry . Recovered materials are like now and can be recycled back into while saving the environment.



Type:A20Ex Volume(L):21
Operating Temperature(íµ):50~210 Recovery(¬ç):95
Socket Source(ACV):220 Power(kw):3.0
Dimensions(mm):790*535*1240 Time per cycle(Hr):1.0
Weight(kg):90.

Function of Solvent Reclaiming Unit :
Calstar Solvent Reclaiming Unit is the machine that works through the method of instillation to reclaim the used solvent into reusable condition. Choosing our Solvent Reclaiming Unit will save you lots finish products cost of using expensive solvent, protect the whole green environment and keep everybody healthy.

Solvents that could be reclaimed:
Isopropyl alcohol, acetone and butanone, days that water, get water to wash, washing Net water, wash mode water, diluent, Banana oil, alcohol, benzene, washing solvent, acetic acid esters, halogenated hydrocarbons, trichloro oxide, trichlorethylene, petroleum solvents.

Treatment Flow Chart :
Auto parts ,Electronic products, Colored drawing on pottery gold ornament, Precision casting, Hardware manufacture, Movement equipment, Artificial leather, Revertex product ,Coating chemical industry , LED product ,FRP product, Tree ester shoes material , LCD optics product.
Operation principle :separation through evaporation.

Features
This set of A-model is very fast , safe and simple to operate . They work well with most organic sovants popular in today's industry . Recovered materials are like now and can be recycled back into while saving the environment.



Type:A20Ex Volume(L):21
Operating Temperature(íµ):50~210 Recovery(¬ç):95
Socket Source(ACV):220 Power(kw):3.0
Dimensions(mm):790*535*1240 Time per cycle(Hr):1.0
Weight(kg):90.

Features
This set of A-model is very fast , safe and simple to operate . They work well with most organic solvents popular in today's industry . Recovered materials are like now and can be recycled back into while saving the environment.

Function of Solvent Reclaiming Unit :
Calstar Solvent Reclaiming Unit is the machine that works through the method of instillation to reclaim the used solvent into reusable condition. Choosing our Solvent Reclaiming Unit will save you lots finish products cost of using expensive solvent, protect the whole green environment and keep everybody healthy.

Solvents that could be reclaimed:
Isopropyl alcohol, acetone and butanone, days that water, get water to wash, washing Net water, wash mode water, diluent, Banana oil, alcohol, benzene, washing solvent, acetic acid esters, halogenated hydrocarbons, trichloro oxide, trichlorethylene, petroleum solvents.

Treatment Flow Chart :
Auto parts ,Electronic products, Colored drawing on pottery gold ornament, Precision casting, Hardware manufacture, Movement equipment, Artificial leather, Revertex product ,Coating chemical industry , LED product ,FRP product, Tree ester shoes material , LCD optics product.

Equipment characteristics
1. Electric Control Box: Enclose anti-explosion component to prevent fire accident from solvent reaction .
2. General Control Box :
A. Double Temperature Control: 3stages setting to prevent solvent and increase recycling output.
B. Auto shut-off time to preset minimum volume of solvent and prevent gas explosion .
C. Over heat protection system will be active when the machine temperature is too high.

Tank : imported Ss304 heave duty stainless steel material.
Condense pipe : anti-explosion electric system with blowing fan.
Heating system: enclose heating connectors with anti-explosion design.
Switch: anti-explosion design, auto return to original position.
Heat conduction system: anti-explosion electric system controls heat transfer oil circulation .Extend oil life and keeping recycling process wording.



Type:A30Ex Volume(L):32
Operating Temperature(íµ):50~210 Recovery(¬ç):95
Socket Source(ACV):220 Power(kw):2.0
Dimensions(mm):825*638*1280 Time per cycle(Hr):2.0
Weight(kg):116.

Product Details:
Product Type Other
Technology Other
Power Source Pneumatic
Operating Type Semi Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month

Price And Quantity:
Minimum Order Quantity 1 Unit
Price Range 50000.00 - 125000.00 INR/Unit

Product Specifications:
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.

Color Dark Blue
Power 420 Volt (v)
Usage/Applications Casting, Forging, Sheet Metal
Technology Other
Operating Type Semi Automatic
Pressure 6-7 Bar
Surface Treatment Painted
Power Source Pneumatic

Portable Sand Blaster

Applications of the portable blaster :

De-sanding and de-coring of castings.
Descaling of castings, forgings parts.
For removal of heat treatment scale, welding flux , corrosion, rusting in steel components.
For engraving / creating design, etching on different type of stones and metals.
For removal of old paint from metal surface of ships and other structural steel components.
For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint.
Can also be used in Wooden industry for decorative design purpose.
For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface.

Specification:

Power 7 Hp

Capacity 500 Kg

Material Stainless Steel

Automation Grade Manual

Application Paint Removal

Voltage 220-240 V | 50 Hz

Motor Phase Single Phase

No. of Wheels 3

Product Details:
Product Type L Other
Technology : Other
Power Source : Pneumatic
Operating Type: Semi Automatic
Power : 420 Volt (v)
Pressure : 6-7 Bar
Surface Treatment : Painted
Supply Ability : 7-10 Unit Per Month

Price Range 50000.00 - 110000.00 INR/Unit
Minimum Order Quantity : 1 Unit
Power : 420 Volt (v)
Operating Type : Semi Automatic
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.

Pressure 6-7 Bar
Color Dark Blue
Surface Treatment Painted
Weight (kg) Not Applicable Metric Ton
Power Source Pneumatic
Product Type Other
Usage/Applications Casting, Forging, Sheet metal etc
Technology Other

Applications of the portable blaster :

De-sanding and de-coring of castings.
Descaling of castings, forgings parts.
For creating rough surface inside and outside of heavy structure, pressure vessels, pipes for proper bounding of the primer/paint.
Can also be used in Wooden industry for decorative design purpose.
For creating textured/rough surface on different type of paving blocks, marbles, granite for their proper bounding on surface.
For removal of heat treatment scale, welding flux , corrosion, rusting in steel components.
For engraving / creating design, etching on different type of stones and metals.
For removal of old paint from metal surface of ships and other structural steel components.

Specification:

Power 5 Hp

Capacity 200 Kg

Material Stainless Steel

Automation Grade Semi Automatic

Application Rust Removal, Surface Finishing

Motor Phase Three Phase

Voltage 220-240 V | 50 Hz

No. of Wheels 3

TMI 45.49.1.200430 - SPRING TYRE EARTHQUAKE ACCESSORY MACHINE

Product Details
Use:
Food, industrial cleaning fluid recovery from water, oil removing machine.
Short introduction:
TMI 45.49.1.200430a spring tyre earthquake
Standard type
20kg load
Weight about 170kg

TMI 45.49.1.200430a spring tyre earthquake
High barrel
20kg load
Weight about 180kg