Automatic Restivity/ip System

Microprocessor Turbidity-Temp. Meter S-966

Highly Stable & Accurate.
16 Character X 2 Lines Alphanumeric LCD.
30 mm flat bottom Test Tube.
0 to 1000 NTU
Automatic Range Selection.
Higher durability and long life.
Tested on quality parameters.
1000 Samples Storage with Date &Time.
Measurement of Temp. and Turbidity.

Technical Specifications:-

Model
S- 966

Turbidity
Range
0-1000 NTU
Resolution
1.0 NTU in lowest Range
Range Selection
Automatic
Accuracy
+3%, FS+1 -digit

Detector
Photodiode

Sample System
30mm Clear Glass Test Tube

Light Source
3.6 V/ 100ma LED

Calibration
Manual

Temperature

Range
0C to +100C

Resolution
0.1c

Accuracy
+0.2%

Input Type
Pt 100

Calibration
Auto/Manual

Display
16 Character X 2 Lines Alphanumeric LCD

Display Format
Temp &Turbidity Simultaneously

Setting
By Soft Touch Keys

Storage
1000 Samples With Date & Time

PC Interface
RS-232

Real Time Display
24 Hour Mode With Date

Power Supply
230 V +-10% Ac 50 Hz Dimension 198x238x103mm

Weight
3 kg.
Accessories-

Test tube (Set of 5)
Operation Manual
Dust Cover

The traditional method of radiographic inspection for weld of oil and gas pipeline is to use radiographic source and film for transmission. However, with the improvement of quality control efficiency by the construction party, the method of film imaging can not meet the requirements of customers for efficiency. In addition, the film also has some problems, such as image processing, poor preservation, environmental pollution and so on.
Based on this situation, HATATEST independently developed the PT360 pipeline weld DR automatic detection system.

HATATEST Automatic DR Detection System for Pipeline Weld-PT360 is a kind of Automatic DR Detection robot who is similar with Transcan system in Russia, But HATATEST Automatic DR Detection System for Pipeline Weld-PT360 as the following highlights comparing with Russian Transcan :
-- Aluminum alloy chain spider, light and easy to carry
-- 400-1219 mm, any caliber can be used
-- Battery drive, maximum working time 12 hours
-- Software control (start and stop can be controlled manually by software, or automatic start and stop can be set)
-- Single-arm or double-wall transillumination
-- The whole installation process only takes 2 minutes
-- Real time imaging, greatly improved detection efficient
-- Image quality ISO 17636-2 Class B
-- Adjust the fixed device of the radiation source according to the customer's requirements, and match different radio sources

SALIENT FEATURES.

Fully automatic measuring system Touch Screen display.

Measure the Brix of sugar solution

Correct effect of temperature on the Brix automatically , Memory  upto� 1024  results

Reading  Time  2  seconds.  Calibration password  protected


User can set the Scan times, Type, Revise, Sample ID, Calender  RFM-970  - Thermostatic  Temperature  Control� +10 C

Specifications:



Model
RFM950
RFM970


Display
Touch Screen


Measuring range-Refractive index nD
1.30000-1.70000


Brix (BX)
0-100%


Measuring accuracy-Refractive index nD
*0.0002


Dissolved solids Brix
0.10%


Measuring resolution - Refractive index nD
0.00001


Dissolved solids â??Brix
0.01%


Temperature display range
0 To sooc


Thermostatical Control Range
NA
Room Temperature +10 C


Temperature Control Accuracy
+0.5 C


Memory & Interface
1024 data, USB


Power supply & Output Interface
AC 220V,50/60Hz & RS232C / USB


Packing Dimension LxWxH (mm)
500 x 330 x 220


Gross Weight
9kg

SALIENT FEATURES.

Fully automatic measuring system Touch Screen display.

Measure the Brix of sugar solution Display the temperature of sample

Correct the effect of temperature on the Brix automatically memory upto 1024 results

Reading time 2 seconds calibration password protected

Easy clean prism simple operation


User can set the Scan times, Type, Revise, Sample ID, Calender  RFM-970  - Thermostatic  Temperature  Control  +10 C

Specifications:

Model
RFM950
RFM970


Display
Touch Screen


Measuring range -Refractive index nD
1.30000-1.70000


Brix (BX)
0 - 100 %



Measuring accuracy- Refractive index nD
*0.0002



Dissolved solids Brix
0.10%



Measuring resolution - Refractive index nD
0.00001



Dissolved solids Brix
0.01%



Temperature display range
0 tO SOOC



Thermostatical Control Range
NA
Room Temperature +10C


Temperature Control Accuracy
+0.5C



Memory & Interface
1024 data, USB



Power supply & Output Interface
AC 220V,50/60Hz & RS232C / USB



Packing Dimension LxWxH (mm)
500 x 330 x 220



Gross Weight
9kg

Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufactured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USP/IP standards.

Features:-

8 Stations
Complies with USP, IP specifications
Extremely Useful for Pharmaceutical Labs
Highly Accurate and Easy to Operate
Programmable Stirrer Speed Control i.e. (25 â?? 200 RPM)
0 x 4 Line Alphanumeric LCD with Backlit
19 Soft Touch Membrane Type Keys
Three Programming Modes i.e. Routine, Sustain and Control
20 Independent Programmable Setups for Routine and Sustain Mode with Storage Facility
200 Samples Storage Facility
Printer Attachment Facility
Audio Visual Indicators for System Status
Easy to Empty & Clean the Water bath with Bottom Drainage

Technical Specifications:-



Model
S- 958


General


Stations
8 Stations


Display
20 X 4-line Alphanumeric LCD Display with Backlit


Key Board
19 Soft Touch Membrane Type Keys


LED's
4 LED's for different Status Indications, 3 LED's for Test Status Like Run, Alarm, End & 1 LED for Heater ON/ OFF Status.


Setup Data
Facility for 20 Different Test Setups Available in Routine and Sustain Modes


Printer Attachment
Provision for the attachment of dot-matrix printer with Centronics Parallel Port Interface Available


Stirrer


Speed
25 to 200 RPM + 1 RPM


Resolution
1 RPM


Accuracy
+1 RPM


Temperature


Range
30 To 50 Degree Celsius


Accuracy
+ 0.2 Degree Celsius


Temp. Control
Microprocessor Based Using PT 100/ Semiconductor Sensor as Per IP/USP


Sample


Reaction Vessel
1000 ml Jar with Acrylic Cover Stirrer Pedal and Mesh Basket


Heater
0.5 KW


Power
230V, - 10%, 50 Hz, AC


Weight
65 Kg. (Approx.)



Accessories:-

Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1)
External Temperature Sensor (T2) for Vessel
Reaction Vessel capacity 1000 ml
Round Acrylic Cover Plate with Hole and a large slit
S.S. Paddle, S.S Wire Mesh Basket
Glass pipettes with rubber bellows
Mains Lead
Instruction Manual
Dust Cover

Box dimension - 1000mm x 750mm x 750mm
Box Material - Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One

Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g
Filtration HEPA : particles
Glove Ports - Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials
Gloves Piercan USA make Neoprene, or Butyl
Dust filter - 0.3 micron Dust filter. HEPA Filter
0.3 micron HEPA, H13 or H14
Gas Purifier - Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent One each

Shelves - Height Adjustable, Acrylic Stainless Steel shelves
Three/ Yes
Box Pressure Control -+15 mbar to -15mbar. Automatic pressure control. Yes
Box Lamp -One front mounted fluorescent lamp one inside
Yes
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.

Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel.
PLC Program Logi Control with integrated control with external display unit 10 One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10ï?­2mbar
Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use
One
Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support - Efficient service facilities with trained engineers at your place
warranty
One years comprehensive onsite warranty.

Box dimension 1000mm x 750mm x 750mm
Box Material Stainless steel 304 L box with mirror finish inside brushed finished outside
Acid resistant
Box panel/window Openable Front window with polycarbonate an extra coating for chemical and scratch resistance One

Feed through electrical single phase 220 V - 16 A
Attainable purity < 100ppm H2O and < 500ppm O2 at complete pressure range.
O2 = 20 l , H2O = 960 g Yes
Filtration HEPA : particles Yes
Glove Ports Glove ports, 220mm diameter and should be O ring sealed
Gloves Materials Gloves Piercan USA make Neoprene, or Butyl
Dust filter 0.3 micron Dust filter.HEPA Filter 0.3 micron HEPA, H13 or H14
Gas Purifier Molecular sieves, Activated Carbon, Charcoal chamber with high efficient O2 ,H2O adsorbent
Shelves Height Adjustable, Acrylic Stainless Steel shelves
Box Pressure Control +15 mbar to -15mbar. Automatic pressure control.
Box Lamp One front mounted fluorescent lamp one inside
Antechamber Type Cylindrical, 300 mm diameter, Length 600mm (inside dimensions) Material stainless steel, thickness 2.5mm Inside surface brushed finish Sliding tray stainless steel Doors SS thickness 10mm Door lock easy to operate, spindle lock Pressure gauge, monometer: analog display Vacuum/ Refill process.
Regeneration Below 5% loss Complete automated or manual operation with foot switch Yes
Sensors Solid state oxygen sensor with 0- 1000 ppm & Solid state moisture sensor with 0-500 ppm Auto purge PLC controlled via system control panel. Yes One Each
PLC Program Logi Control with integrated control with external display unit 10â?? One Yes
Vacuum Pump 740 mm HG with fittings (Optional) High Vacuum Pump: Oil sealed vacuum pump â?? 150 lpm,Vacuum level : 5x10 2mbar Type rotary vane pump, dual stage, Oil mist filter, Oil recirculation, Automatic gas ballast control, 10 m3/h Optional facility for automatically turning off the vacuum pump when the antechamber is not in use One
2Recirculation Pump Optional Re circulating purified gases pro rata basis 20m3/
per hour
Service Support Efficient service facilities with trained engineers at your place
warranty One years comprehensive onsite warranty.

SALIENT FEATURES:

LOW STRAY LIGHT


LMSPUV1000B uses a rigid die-cast aluminum base as Its optical mount to ensure instrument� stability and Reliability.

STRANDED CURVE


LMSPUV1000B
Users can set wavelength automatically through arrow keys to avoid operation errors.

DATA OUTPUT

Specifications:



Model
LMSPUV1000B


Make
LABMAN


Optical System
Single beam, Grating 1200 lines/mm


Wavelength Range
190-1000nm


Bandwidth
2nm


Wavelength Accuracy
+1nm


Wavelength Repeatability
+0.5nm


Wavelength Setting
Automatic.


Photometric Accuracy
+0.5%T


Photometric Repeatability
+0.3%T


Photometric Range
-0.3-3A,0-200%T


Stray Light
s0.3%T


Stability
+ 0.002A/h @ 500nm


Display
LCD


Detector
Silicon Photodiode


Standard Cell Holder
4-position 10mm cell holder


Light Source
D2 lamp & Tungsten Halogen Lamp ( W Lamp)


Output
USB Port & Parallel Port(Printer)


Power Supply
AC 220V,50/60Hz


Dimension (LxWxH) mm
490 x 370 x 220


Weight
15kg

Securely seal blood bags with our reliable tube sealer.� Ensures airtight storage and prevents contamination.Perfect for hospitals, blood banks, and medical research facilities.

Lightweight, portable and heavy duty.
Di-Electric heating without damaging the blood cells.
Modern electronic system.
Wide seal of 4-6 mm diameter.
Easy to clean electrodes
Electrodes well protected by a cover
Able to seal all blood bag tubes.
Senses the blood bag tube for automatic sealing process
Power control unit monitored by microprocessor.
Continuous Battery backup 230V in� Online mode.
Battery Backup gives 500 sealing when fully charged on offline mode.
Visual indication for Mains, Ready & Seal