Machine breife: The single tip net warp knitting machine use the raw material such as polyester fiber polyamide fiber polyester fiber low elasticity round silk etc. The products can be fishing net, Building protecting net,Sunshading net,Packing net,Orchard bird-bird +Cprotecting net, net for sports etc.Itf+s an ideal waving machine in knitting industry.
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery
Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
TMI 14.2.200415
Product Description
Ring Spinning Frame has the features of high quality yarn, high level of automation, convenient operation and easy management . The option for the number of spindle ranges from 384 to 516 .The machine can be equipped with every kind of drafting system that is available from Chinese or European brands. This model was first entered into the market in 1989 and it is known as one of the most stable and reliable ring spinning frame by customers after modification for 20 years.
Technical Specifications
Spindle gauge: 70mm
Lifting: 205, 180, 155 mm
Ring Diameter: 45,42,38mm
Number of Spindle: 384,396,408,420,432,444,456,468,480,492,504,516
Yarn count: 97.2---4.9tex (6--12Ne)
Twist: 300--1600(T/m)
Draft Ratio: 10-50
Spindle speed: 15000-22000 rpm
Spindle drive: Single tension pulley,Z or S twist optional
Spindle wharves diameter: 22,24,20.5mm
Creel: One tier hanger, Four or six rows optional
Main Motor (380v50Hz): 15/7KW 17/9KW 18.5/11KW 22/11KW (380v)
Suction Motor (380v 59 Hz):
1.5KW (for No.of spindles below4444)
2.2KW (for No.of spindles above 456)
Lift Motor: 370W
Distance between Spindle from left and right side: 700 mm
Headstock dimensions: Width: 640mm, length:680mm, height:1700mm
Endstock Dimensions: Width:640mm, length:1300mm,height: 1768mm
Total height of the machine: 2300 mm
Total length of the machine:
L= 2380 + (N/2-1) 70mm L: length
N: where means the number of spindles
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery
Product Description
Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring.
Technical Specifications
Production Output (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Speed in r/min: 740 r/min
Blade extension from grid in mm: 2.5 - 7.5 mm
Rail Diameter in mm: 5132 mm
Total Height in mm: 3864 mm
Power in Kw: 4.1 Kw
Weight in Kg: Around 1600 Kg
TMI 12.4.200413
Product Description
Rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver.
This is a double-side-type spinning machine based on modularised design. It applies many new technologies such as air suction spin box, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000 rpm.
Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price-performance ratio.
Technical Specifications
The minimum and max. tex: 120-150 (5s-36s)
Suitable tex: 83.2-28 (7s-21s)
Cotton to be fed: 2500-5000
Rotor speed (r/min): 100000
Yarn guiding speed m/min: 40-160
Splitting roll seppd: 5500-9000
Twisting degree: 220-2250
Pneumatic moto purging volume (m3/h): 5500
Suitable fiber length (mm): less than 40
Operating height (mm): 1560
Yarn feeding bobbin: outer dia: 400x914
Head space (mm): 230
Rotor diameter (mm): 400 or 40
Head number: 192 or 240
Bobbin specs (outer diameter*height)(mm): 54x170
Take-up specs (diameter*height): 300*150
Loaded weight (kg): 3
Crossing angle: 300,330,390,420
Yarn breaking (Filament per 1000 filament per hour): less than =50
Purification efficiency: 60-80
Pressure in rotor intra cavity: greater than = 5
Mechanical stretching times: 32-220
Tension stretching times: 0.93-1.06
Total power: 64kw
Product Description
Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine.
Technical Specifications
Capacity: 800 Kg/h
Number of trunks: 4-6
Air volume of conveying fan: 1.1 m3/s
Power: 10.85 Kw
Dimensions: 250 mm x 1600 mm x 4400 mm
Net weight: 4800 Kg
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery
Product Description
Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing.
Technical Specifications
Machine Type: TMI 60.5.1.200412a
Production: 800 Kg/h
Width: 1060 mm
Beater type: Hedgehog
Beater diameter mm: 610
Beater rotating speed r/mm: 480
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L WH): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412b
Production: 600 Kg/h
Width: 1060 mm
Beater type: Card wire roller
Beater diameter mm: 600
Beater rotating speed r/mm: 540
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412c
Production: 600 Kg/h
Width: 1060 mm
Beater type: Sawblade
Beater diameter mm: 600
Beater rotating speed r/mm: 600
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L X W X H): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
We mainly deal in projectile spare parts, such as PU, P7100, P7150, P7200, TW11 ETC.
Guide teeth block, guide teeth, picking shoe, picking link, picking lever, projectile gripper, projectile body, projectile link are very popular.
