Bmw Opps

The Vehicle Commnication Module (VCM) is a high performance, ruggedized, vehicle serial communications gateway. This device provides multiple vehicle serial communication interfaces to meet the requirements of all Ford Motor Company vehicles.

The VCM unit is housed in a magnesium enclosure with a tough, protective, plastic cover for the PCMCIA expansion slot which can, for example, be used for wireless LAN cards or memory expansion.

The VCM device contains five LED status indicators to provide the user with a visual mode of internal VCM, vehicle, and host device (e.g. NGS Classic's T-Handle, PC, Pocket PC/PDS, and Laptop/IDS) operation.

The VCM also has detachable cables for connection to industry standard high-speed host interfaces as well as to the vehicle under test.

The VCM (Version V57) includes both IDS (Integrated Diagnostic Software) and PDS (Portable Diagnostic Software) tools.

Diagnostic coverage includes most 1996 ~ 2009 MY (produced 1995 ~ 2008) Ford, Lincoln/Mercury & Mazda vehicles.

Application Overview
Integrated Diagnostic Software (IDS) is the next generation diagnostic tool. IDS integrates WDS software modified to run on an off-the-shelf laptop with the Vehicle Communication Module (VCM) currently used in NGS+ and PDS, and a new Vehicle Measurement Module (VMM).

Vehicle Diagnostic Connectors
The VCM 16-pin DLC cable is used to connect the VCM to the vehicle. The VCM and VMM connect to the laptop through the Ethernet-USB Adapter Cable (H406/H416).

Interface Devices
The interface devices that are used with this application are:

VCM Vehicle Communication Module This device provides all link based functionality including: Data logger, Self test, Service Functions, Module Configuration and Programming, etc. VMM Vehicle Measurement Module This device provides the following functionality: Oscilloscope, Digital Multi-Meter, Ignition System Test, Fuel System Test, and SGM.

Note that the application will detect the interface device that is connected to the laptop. Indicator icons will appear at the bottom right-hand corner of the IDS screen when the VCM and/or VMM are connected.

IDS VCM Accessories:
Vehicle Communication Module (VCM)
16-Pin DLC Short Cable
16-Pin DLC Long Cable
IDS 4m PC Ethernet-USB Host Cable
DVD(Ford/Mazda)
DVD(Land Rover/Jugar).

As new version of Mercedes Benz diagnostic tool,Super MB Star covers Benz cars from 1989,it support update in the end of customer side,no need to send it back or update through hard disk.super mb star works with more cars models than MB Star C3 and C4 do.
Software version :09. 2011
Hard Drive format available for choose: External HDD/DELL D630 HDD/T30 HDDNewest software version:09/2011
Hard Drive format available for choose: External HDD/DELL D630 HDD/T30 HDD

Super MB STAR 09-2011 Description:
Super MB STAR is one of the best after market tools for Mercedes-Benz diagnostic,coding/programming in the world, it is also an up-to-date tool for online upgrade directly, work with any laptops, compatible with Windows 7/XP/VISTA/2000 operation system, software including Xentry for new released 204/207/212, able to work with Benz cars, trucks, Sprinters, smart, etc.

New features of Super MB Star 09/2011:
• Password Letter verification of your Super MB STAR Online
• Latest version 05/2011
• No need to active EPC/WIS any more, double click the Icon then use it
• New car of GL166, B 246, CLS 218, SLK172, etc, released in this version
• Online SCN Coding/offline SCN Coding/offline coding are all available with this new version
• New function of DATACARD is added.
• The car PL65 is added to Benz price list
• Online updater client platform v1.1.2.0 for users'easier upgrade.
• Support the hardware quick self-test and the software to be quickly recovery.

Function:
1.1989~up to now Car, Bus, Truck, Sprint, Smart .
2. All electric system Diagnostic;(Do not include flash code)
3. Reading out and erasing trouble code;
4. Reading the real-time data of sensor and actuator;
5. Testing the component of cars:coding and programming.

Specification:
1.Language
English/Chinese/Deutsch/French/Italian/Korean/Spanish/Portuguese/Finnish/Danish/Japan/Swedish/Turkish/Finnish/Polish/Hungarian/Korean/Czech/Dutch

2.Character
• Realizes all the function of official factory BENZ compact 3.
•C3 Multiplexer can connect to factory computer and IBM laptop.
•Complete maintenance data. It could offer full disassembly and assembly circuit diagram, working principle and element place anytime needed. It is the best assistant for maintenance man.

Hardware and software requirements:
Software requires at least Intel Celeron/Pentium 2.0GHz, 2G RAM, USB 2.0
recommended and Microsoft Windows 2000/XP/Vista/7 latest service pack installed.

Product software includes:
•DAS: the automatically Diagnosis Assistance System
•WIS.net: Workshop Information System
•EPC.net: Electronic Parts Catalog
•ST Finder: Part location finder
•STARUTILITIES: the movement management system and self-test
•SD Media: Video and PDF lessons
•PL 65: Price List tool to find out how much price by input the parts number
•Xentry: New software released by Benz Company after 04/2009 by diagnosis newcars.
•Smart TAN Code: Opened special function in DAS program with Smart cars 450/451/452/454
•Developer model: Mercedes-Benz engineer mode, remove limitations and open more Special functions.
•Benz Disassembly system: Video lessons to teach you how to remove each part from Benz cars with details order steps.
•Software language: Multi-languages 22 Languages, you can choose the one you need when you using it.
•Normal version : one of 22 languages
•Top version : (22 Languages all )

Product hardware includes:
•Multiplexer: Super MB STAR Diagnostic interface
•OBDII 16Pin: For cars with OBDII port
•Sprinter 14Pin: For sprinter cars or some vans
•38Pin Cable: For old Benz cars with 38 Pin port
•4Pin Cable: For old Benz cars fit for 4 Pin port
•RS232 To RS485 Serial Cable: Connect Multiplexer to PC/Laptop
•Mobile HDD with USB Cable: with all the software per-installed work with any laptops by USB
•USB KEY: Security USB Encryption
•Verification Letter with Password inside: Used for verify the Super MB STAR and upgrade password.
•PCMCIA or Express Card: Used for laptop without serial port
•Driver CD: Installation driver for PCMCIA or Express card.
FAQ

How many years of free updating can we enjoy?
Super MB STAR provides one year free update online service.
What else shall I do before using this item?
You need setting some configurations before using this tool, we have both video and user manual to teach you how to do that, just follow the steps.

Super MB STAR is able to work with Trucks and change the speed limitation?
Yes, Super MB STAR is able to work with different kinds of Benz trucks, and it is able to change the speed limitation, please do that under the legal permission.

What should I do if I do not know how to setting or face some difficulty when install the software?
We provide online service 24 HRs, our after-sales service men can help you solve the problem through teamviewer, just contact the sales.

Is this tool able to work with Reset the Mercedes-Benz SBC Function?
The Super MB STAR Top Version provides you SBC Reset, TV active and some other functions.





Weight: around 6KG
Package: standard box.

Specifications:

This Battery Analyzer is made to test the condition of the automotive battery using the latest battery testing technology. Unlike the conventional method of draining the battery by applying resistance load and obtain the result from the meter gauge. Also, it utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.

The benefits of this test method are:
- Passive testing method is safe.
- Never discharges or drain the battery.
- Able to test condition of discharged battery.
- Consistent and repeatable results.
- Provides unique indication of battery conditions.

Key Features:
Simple and easy to use
- Test batteries on and off the vehicle
- Accurate results in milliseconds
- Battery Life Analysis
- Analysis Result: Good or Replace
- Large easy to read LCD display.
- Test results based on JIS, EN, DIN, SAE and IEC Standards.
- Check Alternator charging conditions
- Check Engine Starter conditions

Functions:
- Tested Result Display: Good or Replace
- Voltage Result Display
- Capacity Display: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
- Internal resistance value (m¦¸)
- Life in percentage (%)

Applications:
Use to test a wide range of 12V batteries Starting (SLI), Deep Cycled and Marine or Wet (Flooded), Valve-Regulated lead-Acid (VRLA) or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards such as: JIS, SAE, EN, DIN and IEC are supported.

OperatingParameters:
System voltage : 12 Volts
Input voltage range : 9V~15V
Power requirement : No internal batteries required. Power on when hooked up during testing
Testing range : 100~1700 CCA, 100~1000 DIN, 100~1000 IEC, 100~1700 EN
Test Time : Less than 5 seconds.


Weight: around 1.5KG
Size: 20*10*8cm
Package: standard box.

Mb Star C3 Pro Software Version: 2010.03:
STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to 2010 March, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.Mb Star C3 Pro with seven cable Fit all computer For BENZ Truck and Cars

Newest software: 2010.03
It needs active after you install the software.

Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2. All electric system Diagnostic;(Do not include flash code)
3. Reading trouble code
4. Erasing trouble code
5. Live-data
6. Adaptation
7. Component testing
8. maintenance
9. Information consultation
10. Component location diagram
11. Wiring diagram.

Features:
Software is 03/2010 version.
XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to March of 2010, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

New Features:
1. This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2. With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3. Every hard disk has it's special number,have self-test function.Just give us the self-test report and the number,we will find out what's the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!
4. What is most important,this C3 has past truck test.It can used to do benz trucks.

Testable system:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Product software includes: (Version: 03/2010 )
1. D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2. W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3. EPC.net : Electronic Parts Catalog
4. ST Finder:Part location finder
5. STAR UTILITIES : the movement management system and self-test

Software language:
Chinese, Croatian, Czech, Danish, Dutch, English, Finish, French, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish

Package list:
1x MULTIPLEXER
1x 16pinOBD II cable
1x 4pin cable
1x 38 pin cable
1x 14pin track cable
1x COM cable
1xRS232 to RS485 Cable
1x Serial adapter cable
One 80G Hard Disc for DAS, EPC and WIS V2010.03, FINDER V2010.03.


Weight: around 5KG
Package: standard box.

T300, T-Code 7.2 T300, key programmer, key maker

Product Name: T-Code 7.2 T300
Part No.: CCT300
Net Weight: Net Weight: 3.5KG
Functions
Use for key programming. More cars than any other transponder machine .

Package contains
1.ADC-145 (Test self)
2.ADC-134 (Honda 3pin)
3.ADC-148 can (peugeot)
4.ADC-139 (Chrysler adaptor1)
5.ADC-138 (Chrysler adaptor2)
6.ADC-128 (Suzuki adaptor)
7.ADC-129 (Mit adaptor)
8.ADC-133 (nissan adaptor)
9.ADC-134 (Honda adaptor)
10.nissan ADC-136
11.Honda ADC-141
12.OBD-II ADC-110
13.nissan ADC-135
14.Daewoo adc-131
15.VAG 2*2 ADC-112
16.POWER lead
17.main unit


3kgs

Mercedes Benz

PC Based Mercedes-Benz Diagnostic System WO/Laptop

Introduction
MB STAR realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to July of 2007,can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

Configuration

- MULTIPLEXER
- 16+PIN OBD II cable
- 38+PIN cable

- 14+PIN cable

- 4+ pin cable
- RS232 communication cable (navigation port)


Optional Configuration:

1. IBM laptop: such as T23, T30...with COM.

- Testable system
- ENGINE
- AUTO-SPEED
- AIR CONDITIONAL SYSTEM
- SRS
- ABS
- ASR
- MPL
- GM
- BENZ ORIGINAL ANTI-THEFT DASX SYSTEM
- KEYLESS ENTERING SYSTEM

- OBD-II SYSTEM............ other new system ,100% as same as original diagnostic Star 2000 .

FUNCTION:

Reading trouble code
erasing trouble code
live-data, adaptation
component testing
maintenance information consultation
component location diagram
wiring diagram.
Coding the new ECU.......

DAS:
Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing.

WIS net:
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -----all in detail.

star finder:

component location diagram for colorized.



software: it is 01,2008, more than 20 kinds of language, such as, en,de,fr,cn,jp,kr,gr,br,pl,dk,ru,ro,pt,se,tr,es,hu,sp,it.






7KG