Fiber Optic Attenuator

Fiber optic attenuators are devices which reduce (attenuate) the strength of a fiber optic signal within a fiber optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements parameter SC, FC, ST, LC, MU, ST End-face APC/UPC/PC Mode Single mode & multi mode Sleeve Zirconia ceramic, phosphor bronze Insertion loss (dB) 0.2 Exchangeability (dB) 0.2 (connect randomly) Tensile strength (dB) 0.2 (0~100N) Vibration (dB) 0.2(5~50Hz, 1.5mm amplitude) Temp. Range (dB) 0.2(-40~80, 21 cycles)

Structure: Single fiber, double fiber, four fiber, six fiber and muti-fiber ctc. Applications: Apply to transnaision equipment telephone data processing equipment and communication, and it is optical transmission wire in transmission network. Cable cross-section Pdr chromatogram Outer sheath: Orang -- muti mode optical fiber Yellow -- mode optical fiber Lnner sheath: Orang -- muti mode optical fiber Yellow - - single mode optical fiber Muti-cable: Outer coating--orange Cable specifications: Attenuation coefficient and bandwidth level Attenuation coefficient

Features: Low insertion loss and high return loss Small bending radius, excellent mechanical and environmental performance Good exchangeability Good durability High temperature stability Standard : telcordia gr-326-core Available : Simplex/duplex patch cord available Fan-out available Pigtail available Various boot(cable) sizes available Fc/lc/sc/st/mtrj/mpo connectors available Lszh and pvc cable Applications: Telecommunication Computer networks Catv networks Active device termination. 1pc/plastic bag, bag size:18mmx22mm Small carton:37x28x28cm Big carton:59x39x30.5cm

Features: Low insertion loss and high return loss Small bending radius, excellent mechanical and environmental performance Good exchangeability Good durability High temperature stability Available : Simplex/duplex patch cord available Fan-out available Pigtail available Various boot(cable) sizes available Fc/lc/sc/st/mtrj/mpo connectors available Lszh and pvc cable Applications: Telecommunication Computer networks Catv networks Active device termination. 1pc/plastic bag, bag size:18mmx22mm Small carton:37x28x28cm Big carton:59x39x30.5cm

Gyfta53 fiber optic cable characteristics: fiber optical cable 1.Accurate fiber excess length ensures good mechanical and temperature performance Gyfta53 fiber optic cable brief introduction The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of fiber reinforced plastic (frp) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene laminate (apl) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin pe inner sheath. After the psp is longitudinally applied over the inner sheath, the cable is completed with a pe outer sheath. Gyfta53 fiber optic cable pictures: 1.Gyfta53-fiber-optic-cable Gyfta53 fiber optic cable fiber optical cable Gyfta53 fiber optic cable paramters: fiber optical cable Gyfta53 fiber optic cable Wooden drum // special package can be customized.Inspection certificate of fumigation should be notified before production as it will take 7 days from application to approval.