Galvanized Sheet Breakwater

Heating only;
Titanium heat exchanger;
Hitachi compressor
Rust free galvanized sheet cabinet
Stainless steel 443 cabinet is optional
From 6KW to 22KW.

Tg-880 are specially used in the big industrial workshops, storerooms, and the big buildings where there are much harmful air and the temperature is very high.
1.The ball diameter (body diameter) is 880mm, and the throat diameter (inner diameter) is 680mm.
2..The volume of air discharge is about 2600 to 6500 cbm/h.
3.There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.

Tg-500b are used in the houses, the ventilating pipes and the small buildings.
1. The ball diameter (body diameter) is 620mm (25inch), and the throat diameter (inner diameter) is 500mm (20inch).
2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
3. The volume of air discharge is about 950-4000 cbm/h.
4. It is about 8 kg/set and the ubc bearings we use are from the usa.
5. We guarantee the usage for 15 years.
6. We can design and manufacture other sizes according to your demands.



650mm*650mm*200mm

Tg-600 are usually used in the general industries and the storerooms.
1. Part one is the ball part and the diameter (body diameter) is 750mm, and part two is middle part and the throat diameter (inner diameter) is 600mm. The third part is base plate.
2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
3. The volume of air discharge is about 1500-5000m3/h.
4. We can design and manufacture other sizes according to your demands.

Heating, cooling and domestic hot water
Three phase
Adopt Siemens controller
Hitachi Scroll compressor
Swep plate heat exchanger
Varied heat curve
Optional part: Internal 3KW electric heater
Rust free Galvanized sheet cabinet
Quiet running design for indoor installation
From 9kw to 20kw.

Heating and domestic hot water
Suitable for home application
Internal soft starter for single phase unit
Internal electic heater and hot water pump is optional
Swep Plate type exchanger
Adopt Siemens controller, easily understandable control
Varied heat curve
Easy intallation with its small compact design
Galvanized sheet case
Stainless steel case is optional
From 9KW to 15KW.

The Duct Corners are used to add rigidity to the flange; hold the ductwork, together and provide a sealing surface for
the gasket.

Octopus Metal offers various Air duct corner, customized production is available based on supplied drawing or sample.


TDC Corner : For Transverse Duct Connector system, the flange is separately installed onto the ductwork.

1) Material: Galvanized Steel, Stainless Steel
2) Size: 20 mm / 25mm / 30 mm / 35mm / 40 mm
3) Thickness: 2.0mm / 2.5mm / 3.0mm / 3.5mm /4.0mm

TDF Corner : For Transverse Duct Flange system, the flange is formed from the same sheet as of the duct.
1) Material: Pre - galvanized
2) Size: 105*30mm
3) Thickness: 1.0 mm -1.2 mm (18-20 Gauge)








Standard export packing.

Evaporative cooling pad features:
Corrugated paper with spatial crossing linked technology, high absorption capability, high water resistant, anti-mildew and long service life.
Large evaporation area, cooling efficiency as high as 80%.
The product absorbs water naturally, with fast speed of pervasion and lasting effectiveness.One drop of water can diffuse within 4~5 seconds. The natural absorption height is 60~70mm/5minutes, as 200mm/1.5hours, having reached international standard.
The product does not contain phenol which is irritant to the skin and te like chemical products. It is safe, energy saving, environmental protective, economic and durable.
Galvanized sheet and aluminum panel optional.

Product specifications:
Available size:7090/5090/7060
Note:size could be made according to the customer
H:height w:width d:depth h:corrugation height
¦á:corrugated sheet angle(1) ¦â:corrugated sheet angle(2)
Pad 7090 pad 7060pad 5090
H(mm) 1500 1800 2000 1500 1800 2000 as per customer¡¯s
W(mm)600, 300 600, 300 as per customer¡¯s
D(mm)100, 150, 200, 300 100, 150, 200 as per customer¡¯s
H 7 7 5
¦á:45 15 45
¦â:45 45 45

The series of fans have following characteristics: low investment, significant ventilation and cooling effect, low noise, big air volume, small energy, smooth operation and long life, high efficiency and so on. They can be used in poultry houses, greenhouses, factory workshops, supermarkets, dining houses, stadiums and etc. they are the best cooling equipments in the large size places of the times. The shutter adopts automatic controlling equipments to let shutter blade automatically open and close by 90 degrees, thus it can reach the purpose of dustproof waterproof and effect of perfect. The quality of the products has reached the international standard.
Information of one of our main fans below is given now for your reference:
commodity description:
Air capacity: 43170 m3/h
Size: 1380í-1380í-450mm
Noise: í_64dB
Power: 1.1kw
Voltage: 380V
Electric current: 2.8A
Weight: 88kg
Material:
Frame: galvanized steel sheet, the layer of the galvanization is 180g/¬Oú¼and the frame is one-off molded, also there is a outlet in the bottom.
Fan Blades: 6 pieces of mirror face stainless steel blades with the diameter of 1270mm and the angle of the blades is patented designed.
The fan translations have all passed the experiment of homeostasis, which makes the air volume keep the same as the very beginning during the operational life span of the fans. Shutter: high strength hot-galvanized steel sheet, with a centrifugal system which can ensure the shutter opens with the angle of 90 degrees under all the conditions. And uncontrollable air can never goes into the birdhouse as the shutter works.
Belt Pulley: the V type belt pulley is aluminum magnesium alloy injection molded, so ití»s light and high-strength.
Belt: the belt is imported from Japan it is ametabolic in a longtime.
Motor: The motor is high efficiency and low wastage of energy and have accredited 3C certification; the Grade of Protection is IP55 and the Insulation Grade is F.
Maintenance free: there is no use to maintain it during its life circle.
Performance: it is used to ensure the minimum and transverse
ventilation in spring and fall and it usually works with the air inlet.