Pvc Extruder Szsj65/132

Features
1: high quality with excellent performance
2: versatility with easy handling
3: sleek design for long lasting life
4: bench mark designing for low end range
5: sturdy and simple for consistent operation
6: high end model with production capacity 250kg/hr ~ 430kg/hr
Standard specifications

1 type co-rotated twin screw extruder
2 capacity 250kg/hr(abs pellet) (55kw main motor)(standard)
4.30kg/hr(abs pellet)(90kw main motor)(option)
3 dimension 800mm(ch), 3, 400mm(l), 1, 800mm(w), 1, 600mm(h),
4 weight 2.8 ton
5 voltage and capacity of power supply
Voltage 380 ~ 440v, 50 ~ 60hz, 3 phase(standard)
Capacity 88kva(ac 55kw main motor)(standard)
123kva(ac 90kw main motor)(option)
6 barrel nitrided steel, nitrided (standard)
Hardness over hrc 63
L/d 40
7 screw segment type with involute spline shaft
8 heater brass casted heater nine blocks 59kw
9 temperature control 9 zone +2zone
10 rpm 50 ~ 440 rpm(main motor 55kw) (standard)
50 ~ 700 rpm(main motor 90kw) (option)
11 main motor 55kw of nema motor by siemens.(standard)
90kw (option)
380 - 440v(standard)
The equipment is widely used in many fields, such as the special production materials of the compounding technology, master batch, engineering modified materials, automotive materials, wire and cable, large plastic pipe, panels, petrochemical, chemical fiber architecture, medicine, agriculture, defense, etc.

JDL65B
29.8T
one feed,separate type extruder, full intermeshing exhaust anutomatic,non-computerized, film
Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.
3.The technology can be adjusted according to customer’s raw material.

1) Main motor: Siemens Beide

2) Contactor: Siemens or Schneider

3) Power supply switch: Sienmens or Schneider

4) Inter mediate relay: Siemens or Schneider

5) Temperature Controller: Japanese RKC

6) Frequency converter made: TECO

2. Auxiliary machines

(1) Shaping machine

(2) Cutting machine

Saw cutting direction: from down to up,

Air engine cylinder: Airtac,

Appearance decorative: spray coating for out doors wpc decking

(3) Stacker for finished products

A. Unload mode: by air engine

B. Material of surface board for unloading: stainless steel

PVC Faux Marble Sheet/Panel Extrusion Machine is continuously improved on the basis of requirements and feedbacks from our customers and combined with foreign advanced technology. It shows superior performance, high reliability and practicality with its compact structure, advanced configuration and outstanding output in the production of 2-5mm thick, high-qualified PVC laminated artificial marble panel.

pvc pipe extrusion machine
1.conical twin screw extruder,high capacity
2.CE,ISO9001-2008,SGS,GOST certificate
3.PLC control

pvc pipe machine
This PVC pipe extrusion line is mainly used to produce agricultural water supply/drainage pipes, architectural water supply/drainage pipes, cable laying pipes etc. This unit adopts advanced design concept to ensure the efficient extrusion of PVC powder, combined with the unique concept of plasticization screw design to ensure uniformity of plastic extrusion, high capacity production.

This unit consists of : Conical twin screw extruder, pipe die head, vacuum calibrating tank, water spraying tank, haul off machine, cutting machine, and stacker etc.
Features:
1.Conical twin screw extruder:
using the high efficient conical twin screws, specially designed for PVC power to ensure uniformed plasticization, high extrusion. Stable temperature controlling system can guarantee high quality pipe extrusion.


2.Mould:
spiral type die head can not only ensure high speed extrusion, but also avoid the thermal decomposition of amorphous plastics and get high quality pipes. There is heating control system inside of the mould, high efficient, easy to extrude. Bronze calibrators can make the pipes fast calibrated and cooled.

3.Spraying and cooling tanks:
Rapid vacuum calibrating system allows the hot extruded pipes to be cooled in a very short time and obtain the final pipe diameter. Automatic temperature control system, pressure regulator, and vacuum control valve greatly enhance the pipe sizing and cooling performance as well as the production speed.

4. Haul off machine:
adopts caterpillar type, which includes two-claw types, three-claw types, four-claw types, six-claw types, eight -claw types, ten-claw types, twelve-claw types etc, suitable for different sizes of pipes. Haul off caterpillar blocks are made of abrasion resistant rubber material, which can make a high and stable hauling speed.





5. Cutting machine:
precision machine cutter is able to make flat, straight cuts into pipes at high speed. A powerful suction device gathers up waste scraps after cutting, thereby making it easier for users to clean the cutter.

6.Pipe belling machine:
automatic pipe belling machine comes with 2 heating ovens to ensure pipe belling quality and productivity., it has R type, U type etc.


wooden case

PVC fiber reinforced hose extrusion line
PVC fiber strengthen hose also be called as PVC network , commonly called as plastic flexible metal conduit , the wall of PVC Braided Fibre Reinforced Hose is three layers, outer and inner layer are soft PVC hose, middle layer is terylene fiber network, which has good chemical and physical property. They suitable for pigeonholing or having corrosives Gas, the liquid one transport, extensively for machinery it apply to, colliery, petroleum, chemical industry , agriculture irritating , building , field such as being civil (solar water heater , gas bottle ).
This line is equipped with two sets of single screw extruder special design for soft PVC, cross-die and high speed fiber winding unit, the machine runs steady, fast and easy to operate.