In the fields of scientific research, medical treatment and industry, accurate management of liquid nitrogen is very important. The liquid nitrogen level monitor we launched has become a leader in the industry with its advanced technology and user-friendly design.
1. Cloud monitoring platform, keep track of dynamics anytime, anywhere
No need to configure additional monitoring host or collector, you can easily view data through a globally accessible web page or mobile APP.
Easy to operate, it only takes a few minutes to complete the device addition through the mobile APP, allowing you to quickly get started.
2. Instant notification to ensure safety
The liquid nitrogen level monitor supports SMS and email dual alarm mechanisms. Once an abnormal situation is detected (such as temperature exceeding the set range, low battery, etc.), an alarm will be sent immediately to ensure that the problem is handled in a timely manner.
3. Excellent performance, reliable and stable
The built-in imported high-precision probe ensures the high accuracy and consistency of the measurement results; supports a wide range of measurements.
The cryogenic level monitor is equipped with a large-capacity 18650 battery and has an anti-reverse connection protection function, which can avoid damage even if it is accidentally installed in reverse.
With super strong anti-interference ability and stability, it can maintain good working condition even in complex environments.
4. Energy-saving and efficient, long-lasting battery life
Using ultra-low power consumption technology, after a single full charge, it can run continuously for up to four months while reporting data every ten minutes.
With offline recording function, it can continue to monitor and save data even during network interruption, and automatically upload to the cloud when the connection is restored.
This liquid nitrogen level monitor not only integrates many advanced technologies, but also wins the favor of users with its extremely simple operation process. Whether it is a laboratory or a factory workshop, it is your ideal choice!
100% NEW HDPE
Features: High strength and high corrosionproof, provides long service life and convenient to fill and clean. It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc. Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours. The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products. We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
Supplier: Sunflower oil, ibc tanks, scraps, nuts, containers, sweet corn, cream milk powder, pets foods, eggs, en590 diesel, petroleum coke, jeta1 and other petroleum products peptamen milk powder, eucalyptus wood log
Supplier: Solvent distillation plant , ethanol distillation plant , etp, water treatment plant , effluent treatment plant, evaporator , dryer, zld plant, lab equipment supplier, lab chemical supplier, industrial equipment , storage tank , bulk tank, petrochemical plant, ethyl acetate distillation plant, supplier of chemicals, reactor , pressure vessel , instruments, plc panel ,dcs panel, mcc panel , steam boiler, agitator tank, mixing tank, blending tank, bottling plant , vodka plant , ena distillation plant , fermentation plant , cooking plant, cpu plant, dg set, dpr report. etc, industrial dryer, industrial storage tanks, lab equipment, bio cng plant, biogas plant, bioreactor, sludge settling tank, wash settling tanks, pre fermenters, culture vessel, blender, blending tank, agitator, mixing tank, shell and tube heat exchanger, reboiler, reactor, mcc electrical panel, pressure vessel, evaporator, industrial dryer, beer plant, brewery plant, ethanol distillery , grain alcohol distiller plant
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
high quality stainless steel 201 honey tank with cover and valve 25kg Basic Information Place of Origin: CHINA Brand Name: Super-Sweet Certification: ISO Model Number: HB Minimum Order Quantity: 1 Price: 12-45kgs Packaging Details: 25 kg honey tank Standard Packing: 1pcs/carton Size: 34*33*33cm GW: 8kg Delivery Time: Shipped in 5 days after payment Payment Terms: T/T, Western Union, MoneyGram, D/P, L/C Supply Ability: 5000 Piece/Pieces per Month 25 kg honey tank
In the fields of scientific research, medical treatment and industry, liquid nitrogen is an indispensable low-temperature cooling medium, and the safety and convenience of its storage and transportation are particularly important. The liquid nitrogen supply tank launched by KGSQ is designed to meet the high-demand liquid nitrogen storage needs. It adopts advanced insulation technology and pressure regulation system to ensure the purity and stability of liquid nitrogen. It mainly has the following advantages: â??High safetyâ??: The liquid nitrogen supply tank is equipped with a double safety automatic control valve to provide double protection. The discharge pressure is lower than 0.1mpa, ensuring the safety and reliability of liquid nitrogen filling. â??High efficiencyâ??: It has the functions of continuous pressurization and continuous discharge. This uninterrupted nature greatly improves the liquid supply efficiency. â??Strong durabilityâ??: Made of 304 stainless steel, it not only has good thermal insulation performance, but also is durable and strong in bearing capacity. â??Good low-temperature performanceâ??: The self-pressurized liquid nitrogen tank adopts a double-tank vacuum structure to effectively isolate external heat, reduce the volatilization rate of liquid nitrogen, and ensure long-term stable storage and use of liquid nitrogen. â??Easy to operateâ??: It is equipped with high-load-bearing mobile casters, making movement and operation faster and more convenient. At the same time, the dedicated ultra-low temperature stop valve makes operation easier, beautiful and durable. â??Intelligent controlâ??: The low pressure liquid nitrogen tank also has an intelligent control system, equipped with booster valves, drain valves, vent valves, pressure gauges and other components, which are convenient and simple to operate, increasing the safety of laboratory work. The liquid nitrogen supply tank has become an indispensable and important equipment in the field of life sciences due to its advantages such as safety, reliability, easy operation, good thermal insulation performance and wide applicability. It provides a solid guarantee for the storage and protection of biological samples, which not only improves work efficiency, but also enhances the safety of use. It is an ideal choice for the storage and use of liquid nitrogen in scientific research, medical and agricultural fields.
