Please click here to check who's online and chat with them.

Dog2082S Dissolved Oxygen Analyzer

Supplier From China
Sep-29-24

DOG2082S online analyser is an intelligent online electrochemical water quality analyser, is a widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water and other solutions of dissolved oxygen and temperature continuous monitor, continuous monitoring data through the output of the transmitter connected to the recorder to achieve monitoring and recording of the remote transmission, but also can be connected to the RS485 interface through the MODBUS RTU protocol can be easily connected to a computer to achieve monitoring and recording, can also be connected to the computer to achieve monitoring and recording, can also be connected to a computer to achieve monitoring and recording, can also be connected to a computer to achieve monitoring and recording, and can be connected to a computer via MODBUS RTU protocol. RTU protocol can be easily connected to a computer to achieve monitoring and recording.


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Dog2082S Dissolved Oxygen Analyzer

Oct-09-24
 
Dissolved Oxygen Meter Introduction
The technology of this dissolved oxygen meter is from Germany,We use circuit technology that other manufacturers are not to make now,so we offer exceptionally long warranty time: 3 years.It integrates VariPower�® wide-range power supply chip,so it can work at any power 20...253 V AC/DC, even with large fluctuations in supply voltage
Dissolved Oxygen Meter Application
Fermentation tank Biotechnology Pharmaceuticals industry Food and beverage Chemical production Paper, starch pulp, petroleum smelting, Ion exchanger regeneration, boiler water, cooling water etc.
Aug-20-21
 
innoCon6800O controller matching with innoSens 420 polarographic dissolved oxygen sensor, can continuously monitor the dissolved oxygen in water, with NTC automatic temperature compensation, panel installation, suitable for using under a variety of weather and complex industrial environments.


Application:
Wastewater Treatment
Surface Water
Aquaculture
Sep-06-17
Supplier From Bikaner, Rajasthan, India
 
Key features:
1.Optical technology; no need for electrolyte and membrane changes
2.Short response time and excellent long-term stability
3.Applicable for a wide range of concentrations and temperatures
4.Highly accurate and virtually maintenance-free
5.Sturdy aluminum housing (ip 65)

Key specifications:
1.Liquid phase measuring range: i) 1 ppb â?? 2 ppm or ii) 30 ppb â?? 35 ppm
2.Liquid phase accuracy : i) â± 1 ppb or ii) â± 30 ppb
3.Gas phase measuring range: i) 0 â?? 4.2 % o2 or ii) 0 â?? 50 % o2
4.Gas phase accuracy: i) â± 0.002 % o2 or ii) â± 0.03 % o2
5.Response time: t90 â?¤ 10 s
6.Material: 1.4404/aisi 316l, silicone (fda), ptfe (fda)
7.Datalogging: manual and automatic with a logging time of 5 to 600 seconds; approx. 5, 000 measurement values; pc software and usb-interface
8.Power supply: battery operated
Dec-31-19
 
DOS-1703 Portable Dissolved Oxygen Meter
DOS-1703 portable dissolved oxygen meter is outstanding for ultra-low power microcontroller measurement and control, low power consumption, high reliability, intelligent measurement, using polarographic measurements, without changing the oxygen membrane. Having reliable, easy (one-hand operation) operation, etc.; the instrument can display dissolved oxygen concentration in two kinds of measurement results indicates, mg / L (ppm) and the oxygen saturation percentage (% ), in addition, measure the temperature of the measured medium simultaneously.


Technical indexes
Measuring range DO 0.00--50.0mg/L
0.0--500%
Temp 0 60 ATC/MTC
Atmosphere 300--1100hPa
Resolution DO 0.01mg/L,0.1mg/L(ATC
0.1%/1%(ATC
Temp 0.1
Atmosphere 1hPa
Electronic unit measurement error DO ±0.5 % FS
Temp ±0.2
Atmosphere ±5hPa
Calibration At most 2 point, (water vapor saturated air/zero oxygen solution)
Power supply DC6V/20mA; 4 x AA/LR6 1.5 V or NiMH 1.2 V and chargable
Size/Weight 230 100 35(mm)/0.4kg
Display LCD
Sensor input connector BNC
Data storage Calibration data99 groups measurement data
Working condition Temp 5...40
Relative humidity 5%...80% (without condensate)
Installation grade â?¡
Pollution grade 2
Altitude
May-29-21
 
Gas Headspace Analyzer adopts a new handheld design and is equipped with advanced sensors, which can accurately and conveniently determine O2, CO2, N2 in sealed packaging bags, bottles, cans and other packaging containers. It can store the testing data in the device and transfer to the DK-190 software or third-party software. Effectively testing the atmosphere of the package is necessary steps of mass brand manufacturing.

Features
Testing data can be saved automatically.
Portable design is suitable for test on production lines.
The testing data can be transported to the DK-190 software or the third-party software.
The protective cover of the sampler needle assured the testing safety.
The built-in storage of data can reach 1500 pieces , which can meet the needs of large amount.
Color display with touching function.
It can be used for measurement of oxygen or combination of oxygen and carbon dioxide.
The minimum volume of sampling gas is 3 ml.
Data can be transmitted through Ethernet and USB.
Optional wireless micro-printer.

Principle
The gas is transported to the embedded sensor which calculate the proportion of O2 and CO2 via the exported signal, the test is stopped when the required condition is reached.
Standards

This test instrument conforms to many national and international standards:
ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1, GB/T 1038-2000, YBB 00082003.

Applications
Packaging Bags Test the volume of O2 and CO2 (optional) in headspace of non-vacuum sealed packaging bags of coffee, cheese, milk tea, milk powder, bread, bean powder, instant food and drugs, etc.
Packaging Containers Test the volume of O2 and CO2 (optional) in headspace of packaging containers of coffee, milk powder, food, cheese, can, Tetra Pak and beverage, etc.

Technical Specifications
Testable Gas O2 (Standard) CO2 (Optional)
Test Principle Electrochemistry Infra-red absorption
Life of Sensor 2 years (In air) >15 years
Specification of Sensor 0-100%
Resolution 0.01 %
Accuracy ±0.2% ± (0.03% reading value *5%)
Sampling Volume 3ml (Standard Mode)
Dimension 230mm (L) 120mm (W) 82mm (H)
Power Supply 220V AC ± 10% 50Hz 120V AC ± 10% 60Hz
Net Weight 1 kg

Configurations
Standard: Instrument, Sampling needle, Filter, Sealing gasket
Optional: Wireless printer, DK-190PC Professional Software, Device for testing ampoule, Standard portable bag
Nov-05-20
Buyer From Guntur, Andhra Pradesh, India
Nov-28-11
Supplier From Hefei, Anhui, China
Jul-13-21
Buyer From Greater Noida, Uttar Pradesh, India
Oct-17-20
Supplier From Guntur, Andhra Pradesh, India

Verification Status