Chopped Glass Fiber For Concrete

Fiberglass chopped strands Chopped Strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins,such as polyester and phenol resin.Thermoplastics are used a wide range of industries,including the automotive,electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic PA, PBT,PET,PP,ABS,AS,etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry,household products,pump casing,anticorrosion chemistry and exercise equipments. Yixing Product Characteristics: 1.Brand name:Yixing Fiberglass chopped strands 2.Model number:yxcs8001 3.Filament diameter: 13um etc 4.Chopped length: 3mm,4.5mm,6mm,12mm,18mm etc We can produce some customized products with special requirement according to your demand 5.Excellent clustering property,few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin,no fiber out product surface,good surface quality 8.Good strand integrity,low static,low fuzz,excellent mold flow ability 9.Quick wet-out by resin,excellent technical&mechanical properties 10.Water ratio:

We can produce different lengths 6mm, 12mm, 18mm and 24mm Usage: Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation. In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.

Glass;Fiber Chopped Strand Mat Description E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model. Glass;Fiber Chopped Strand Mat Characteristics 1)Weight is evenly distributed per gram 2)Saturated fast, 3)Bubbles easy ;to be eliminated, 4)High transparency 5)Excellent coating model;performance 6)Less;consumption of ;resin. Glass ;Fiber Chopped Strand Mat Application Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life. Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products. Glass;Fiber Chopped Strand Mat Technical Parameters ModelTypeMass per Unite Area(g/m2)WidthLinear density(172;m) Loss on lgnition(%) WDQ150 E-Glass 150 104011-13 1.5%-8.5% WDQ225 E-Glass 225 1040 11-13 1.5%-8.5% WDQ280 E-Glass 280 1040 11-13 1.5%-8.5% WDQ300 E-Glass 300 1040 11-13 1.5%-8.5% WDQ450 E-Glass 450 1040 11-13 1.5%-8.5% ZDQ280 C-Glass 280 1040 13-17 3.0%-6.0% FDQ300 CP-Glass 300 1040 13-17 3.0%-6.0% Glass;Fiber Chopped Strand Mat Packaging Packing Quantity Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft

Fiberglass chopped strands Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers. Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments. Yixing product characteristics: 1.Brand name:yixing fiberglass chopped strands 3.Filament diameter: 13um etc 4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to Your demand 5.Excellent clustering property, few filoplume. 6.Good dispersibility and fluidity property 7.Compatible well with basic resin, no fiber out product surface, good surface quality 8.Good strand integrity, low static, low fuzz, excellent mold flow ability 9.Quick wet-out by resin, excellent technical&mechanical properties 10.Water ratio:

Low dielectric glass fiber DW140 is made of special glass fiber, which has lower dielectric constant and dielectric loss than alkali-free glass fiber, and lower density. The thickness of electronic-grade glass fiber cloth is 0.14mm, and other varieties can also be produced: untwisted yarn, chopped strand, electronic-grade glass fiber yarn. SG Three-phase Dry Type Transformer SG-3KVA 400/20 V headlamp H7R.2 Globe Valve Seals kit 11G4DJ-1055F-14-1 MONITOR JZ-MC-V Thermo meter WTYY-1021 Modun u ra (U52) ADAM-4068 Filter element of Air filter nozzle oil pump SDSGLQ-68T-40 Level Gauge BNA15/16-MG-M900-V60-MRA-3/M/1-ZTSS200(V0.85)MG-AU-VK10-TS-M900/25(KCY-15/16-900/3/10) Low dielectric glass fiber cloth DW140 Card for controller B-A/D U13 Position Sensor of Blade MK4-A-B-800-N angular contact ball bearing 7214 BECBM Analog Signal MBD 201 Rectifier signal instruction card A55 SERVOVALVE HYDRAULIC G771K208 Lamp (Red) APS122DNR VALVE NEEDLE J23W-160P Displacement Sensor (LVDT) TDZ-1E-03 DIFFERENTIAL PRESSURE TRANSMITTE 3051CD2A22A1AI1M5D4Q4DFP9HR5 Power alarm board SDP-PR-3AY BREAKER AUXILIARY SWITCH CONTACTS FK10-II-50 PUMP DOSING S1CBH07065PVT8000UA01080EN Three-phase active power measurmnet transducer TS20-WD-3AS-165A4BN MEDIA CONVERTER EMC-02-RX SENSOR, VIBRATION VELOCITY SDJ-SG-2H Blind-free two-color water meter B69H-32/2-W bladder NXQ-AB-25-31.5-L-Y Adhesive insulation component B J793B HSNH440Q2-46NZ ELECTRO STATIC PRECIPITATOR CONTROLLER EPCS-II Liquid Leakage Detector of Generator YTG-B CELL BASAH BATTERY N 200 - 190H52 SERVO CARD DMSVC005 Oring for pump 7LDTNB-6 Flow equalize board SDP-PR-3N SENSOR MEASURING ZS04 Gaskets TN-9001 Mechanical seal for pump 65AY60 Level Transmitter ABDA6CGJ1+AAZ1 LVDT FOR HP Quick closing Valves HL-3-100-15 cam bien ap luc truoc luoi chan rac MPM426W Low dielectric glass fiber cloth DW140 DF2022-2-12-JERRY

The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??