Lfp Modular Battery

The Bosa 48V105Ah is a modular LFP (LiFePO4) rechargeable battery with a rated capacity of 105 Ah. It's a modular design which means you can easily scale up your energy system. With this building block you can configure sytems until 840Ah (max 8 in parallel) or 1000V (max 20 in series). The unique combination of state-of-the art technology, an integrated BMS and smart software makes this lithium battery a robust, safe and easy to use energy storage solution.

Cell Type :LF105 Typical Capacity(Ah):105.0Ah Nominal Voltage(V):3.2V Cell Weight(g):1980±100g Max. Pulse(30sec) Discharge Current(A):315A(3C) Energy Density:169Wh/kg Dimension:T*W*H: 36.7*130.3*200.5 --High-level automatization manufacture equipment used, ensuring cell parameters consistency. --Self-developed ventilation valve with high airtightness & safety performance; --Low Cell inner resistance, high discharge C rate performance. -- Customization service offered. --Long cycle life, 80% nominal capacity left after 3500 cycles @1C/1C charge & discharge. --Full sets of certificates available, ISO 14000, TS16949, ROHS, TUV, UL, UN. -- Product liability insurance covered.

K-LFP48100S is a new type of intelligent battery pack developed by KODU Technology, with built-in cell balance, and a smart monitoring system. It is suitable for the installation of 19-inch cabinets. Intelligent design: intelligent detection, SOC&SOH management, simplified O&M, and self-management. Intelligent collaboration: With the intelligent power system to realize intelligent features (such as intelligent voltage boosting and intelligent hybrid use). Intelligent anti-theft design:Intelligent software lock, displacement lock, and buzzer alarm. High reliability design: integrated BMS design, long service life. Multiple lithium batteries are used in parallel to meet the application requirements of large-capacity sites; Support remote power supply, constant voltage 57V discharge; Energy storage - peak cutting and valley filling; K-LFP48100S has high-energy density, redundant safety design, long life, light weight, easy installation, maintenance-free, remote monitoring Nominal voltage 48V Nominal capacity(25 ,0.5C) 100Ah Nominal energy 25 ,0.5C 4800Wh Weight 40±0.3Kg Cell-positive material LiFePO4 Combination mode 15S1P Dimensions (W * D * H) 443mm*400mm*135.5mm Communication interface RS485&CAN; 2 dry contacts IP rating IP20 Shell material Steel plate baking varnish Cycle life(0.5C, 25 ) 6000 times @80% DOD Design life(25 ) 15 years LED Display Alarm/Run/SOC Electrical parameter Operating voltage 42V-57.6V Maximum charging current (25 ) 100A Maximum discharging current (25 ) 100A Standard charging current (25 ) 50A Standard discharging current (25 ) 50A Recommended charging voltage 54V Discharge cut-off voltage 42V Battery input protection BMS Efficiency 98% Self discharge (25 ) Less than 5% after 90 days storage Internal resistance 40m�© Maximum number of parallels 32 Protection function Overvoltage protection, overcurrent protection, low-voltage protection, over temperature protection, low temperature protection, reverse connection protection, short circuit protection Environment Charging temperature-40~60 (Optional heating film) 0~60 Discharging temperature-20~60 Storage temperature-10 ~45 Relative humidity 5%~95%(non condensing

15kWh Lithium Solar Battery For no city power areas, the battery pack can be charged by solar panels and used for night lighting; For the areas that city power is expensive, the battery pack can be charged during the electricity valley value period, and used at the peak power period; For the areas which power off from time to time, the battery pack can be used as UPS, to avoid information loss caused by sudden power outage

Item: 8S120Ah-PC01-A BMS: with Smart BMS Nominal Voltage: 24V Nominal Capacity:120Ah Charge Current: 60A Discharge Current: 120A Internal Resistance: less than 150m Life Cycle: more than 2000 cycles Communication: RS485&RS232 Weight: about 31.0Kg Dimension : L490mm*W190mm*H230

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".