1. Product Introduction
Electric ball valve compare with the same sized gate valve and globe valve, it can all-closed and all-open when it rotate 90 degree. Valve channels diameter is equal with connection pipes diameter, so the medium can flow past without any leakage. Ball valve is a very important kind of valve, and widely used in the field of petrochemical industry and long-distance transport pipes. Its closure member is a part of globe with hole, and rotate along with valve rod to achieve open and close of valve.
2. Performance Feature
1. Apply to the occasion need two-position cut off and regulating.
2. Electric ball valve can achieve the medium cut-off and circulation functions in the transport pipeline of the petroleum industry, chemical industry paper making, metallurgy, sewage treatment and oil tank truck these fields.
3. High sealing performance and flow capacity, easy to assemble and maintain, small flow resistance, reliable seal.
4. Electric valve has the advantage such as small volume, light weight, large thrust, strong function, easy to operating, high reliability, and installed servo amplifier.
5. Can flow to any position, has wide adjustable range, and it can used for high pressure and big diameter occasion and to control the medium with high viscosity, fiber and fine particle.
6. Directly mounted type, with servo amplifier installed inside. Controlling and operating by output and input 4-20mA signal and 3800VAC voltage. It has the advantage such as easy to link, compact structure, stable and reliable operation.
Description
 Rating :        PN1.0-32.0Mpa  JIS 10K/20K; ANSICLASS 150-900
 Size  :         DN6-900 ,flange JIS /DIN 15A~200A ,BSP NPS NPT BSPT and etc 1/4~36
 Components  :    two-pieces,one pieces,three pieces
 Valve ends  :     flanged connections;threaded joint/screw thread(internal and external thread);socket weld.
 Body  :         WCB , CF8, CF3,CF3M,CF8M SUS304/304L/316L/316/316L/Ti
 Ball  :             SUS 316/304
 Stem  :           SUS 316/304
 Seat  :            PTFE, R-PTFE, PPL, PEEK
 Related standards : ASME B16.34 , API 608 API 598, JIS B2003
Applicable temperature:-196~430
Drive Modes:Manual,gear worm,penumatic ,electric,hydraulic motor,pneumatic-hydraulic motor and electric-hydraulic
Applicable medium:water,gas,oil ,acetic acid,nitric acid,Oxidizing medium,and etc.
Ball Valve Factory:Qingdao HY Valves Co.,Ltd.
China ball valve with pneumatic actuator of water company
With sophisticated technologies and facilities, strict top quality handle, reasonable value, exceptional support and close co-operation with clients, we are devoted to furnishing the ideal worth for China ball valve with pneumatic actuator of water company,2 Threaded Ball Valve,China china centre-pivoted butterfly valve manufacturer. With our experienced technical team, we are always working on technical updates in order to get you satisfied with our products. Our strong technical force, high quality and first-class marketing and after-sales service are your best choice!The product will supply to all over the world, such as Martinique ,Samoa ,Hungary ,Gibraltar ,Curacao . Most people firmly believe we've the whole capacity to provide you happy solutions. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order. If you have any question during using and maintaining, just dial to the after-service team, they will give rapid response, and help to solve the problems you are meeting.Culturally, suppliers can be reluctant to question things they do not understand.
Specifications
China Flange Ball Valve with Pneumatic Actuator or Electric Actuator
Specifications
API 6D Standard Ball Valve
Size: 1/4"-48"
Material: CS/SS
Certification:ISO9001,ISO14001,API6D,API 607,CE
API flange Stainless Steel Ball Valve with Double acting or Spring return Pneumatic actuator
Product features
High precision ball& High tightness seat
Long life ball&seat
the most economical material combination
the best fire safe and static resistance safety
Widely applicable
Various driving types
Product parameter
Main material WCB, WCC, LCB, CF8, CF8M, CF3, CF3M, CN7M, CF8C, 4A, A105, LF2, F304, F316, F304L, F316L, F321, F51, ect.
Pressure rating Class 150 to Class 2500 (PN2.5 to PN 420)
Standards applied API. ASME, ANSI, NACE, CE/ EN, DIN, JIS, BS, ISO, TS, GB, etc.
Operative temperature -196 C to 980 C ( -320.8 F to 1796 F)
Optional operation Manual, Gear, Electric, Pneumatic, Hydraulic.
Actuator Features:
Pneumatic Actuators:
Rack and pinion Actuator Design
Spring return or double acting
Open and closed adjustment stops
True NAMUR accessory mounting
Visual indicator
Electric Actuators:
12V AC, 24V DC, 24V AC, 110V AC,220V AC
NEMA 4 and NEMA 7 enclosures
Manual override
Visual indicator.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types.
Da:actuator double acting , sr:actuator single acting .
Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry,
Tork actuator features body extruted.Aluminium, hard anodized
Caps die cast aluminium, electrostatic painted
Pistons die cast aluminium
Supp.Air 4-6 bar
Ball valve body full borei, aisi 316 stainless steel and 3 parts body
Way: two way.
O-ring ptfe
Pressure suitable low and high pressure.
Temperature -20....140 c degree
Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3")
Test bntnall valves are tested 48 hour, at 20 barda
Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown.
Features of Pneumatic Actuated Ball Valve
It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features.
The ability to open and close quickly.
The actuator is small.
Are you seeking for a reputable manufacturer of pneumatic ball valves
With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality.
Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316
Class 150 to 2500
Nominal Pressure PN6 to PN450
Size 12 to 48
Ends Flanged, Buttweld, Socket weld, Threaded.
Operation Pneumatic Actuated
For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/
Pneumatic Actuator Ball Valve
The pneumatic actuator ball valve is a ball valve equipped with pneumatic actuators. The pneumatic actuator ball valve performs relatively quickly, with the fastest switching speed of 0.05 seconds / times, so it is also commonly called the pneumatic quick cut-off ball valve. Pneumatic ball valve is usually equipped with various accessories, such assolenoid valve, air source processing triplet, limit switch, control box, etc., to realize local control and remote distance centralized control, can control the valve switch in the control room, do not need to run to the scene or high and dangerous manual control, saving human resources, time and safety to a large extent. Specific categories of pneumatic ball valve are, stainless steel pneumatic ball valve, plastic pneumatic ball valve, sanitary level pneumatic ball valve, carbon steel pneumatic ball valve, two-way pneumatic ball valve, three-way pneumatic ball valve, four-way pneumatic ball valve.
If you are looking for more details, kindly visit our website.
