Please click here to check who's online and chat with them.

Tajikistan-Dry Shipper Liquid Nitrogen Kgsq

Supplier From China
May-14-24

Liquid nitrogen tank is one of the indispensable equipment in the laboratory, and its quality and performance largely determine the experimental results of the laboratory. So what are the advantages and uniqueness of the laboratory liquid nitrogen tank?
1. Large caliber design for easy sample pick and place;
2. Larger capacity for sample freezing;
3. Good cryogenic storage performance and low liquid nitrogen consumption;
4. Light weight and small space occupation;
5. High-strength neck tube design reduces liquid nitrogen loss;
6. Multi-layer adiabatic vacuum design to reduce heat radiation;
7. Intelligent monitoring system can be configured to realize remote monitoring;
8. Long vacuum quality assurance period;
9. Product CE certification;
TIANCHI lab series liquid nitrogen tanks are made of special aviation aluminum material, featuring low liquid nitrogen evaporation, light weight, large capacity sample freezing and storage, etc., which can meet the different needs of laboratory professionals. They are available in a wide range of models and are equipped with freezer racks and PC cartridges for easy storage of samples.
TIANCHI laboratory series liquid nitrogen tanks are also factory-directly and independently produced, and have passed CE and ISO9001 certificates, with guaranteed quality and after-sales service. We have cooperated with animal husbandry bureaus, farms, universities, scientific research institutes, laboratories, medical units and other countries, and have won the relevant projects time and again.
If you have any requirements, please contact us, looking forward to your visit and consultation.


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Tajikistan-Dry Shipper Liquid Nitrogen Kgsq

GOLD Member
Aug-31-20
Supplier From Surat, Gujarat, India
GOLD Member
VERIFIED
Nov-09-21
Supplier From Ha Noi, Cau Giay, Viet Nam
GOLD Member
VERIFIED
Dec-26-21
Supplier From Algiers, Algeria
Supplier Of Olive Oil   |   Cement   |   Slag   |   Kaolin   |   Olives   |   Bentonite   |   Dolomite   |   Corrugated Carton Boxes   |   Carton Boxes   |   Dates   |   Clinker   |   Gypsum   |   Fresh Vegetables   |   Silica Sand   |   Fresh Fruits   |   Salt
GOLD Member
VERIFIED
Mar-23-23
Buyer From Abuja, FCT, Nigeria
GOLD Member
VERIFIED
Jun-01-21
 
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
GOLD Member
VERIFIED
Jun-01-21
 
APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.
GOLD Member
Oct-26-21
Buyer From Betul, Madhya Pradesh, India
GOLD Member
Feb-25-19
Supplier From Tianjin, China
GOLD Member
VERIFIED
Mar-24-23
Buyer From Benin, Edo, Nigeria

Verification Status