Marine Heater Exhaust Vent

ZB0632-22
Name
riser vent
Material
stainless steel 316
Suface finish
high polishing
MOQ
1 PC
Technqiue
investment casting
Packing
bubble bag+ carton
Brand
Richwits
Speficication of SS riser vent


This riser vent is casted in stainless steel 316 material by investment casting, which is solid and durable
The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion
resistance .

The material for the bolt is SS 316 also
A flat base for deck mounting and stainless steel pin for easy top removal.

Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.


Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details!

The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features:
Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1.
Power Output: 147 kW (200 hp)1.
Cooling System: Freshwater cooled exhaust manifold and oil cooler1.
Alternator: 14 V/50 A1.
Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger

Description by Manufacturer
ENGINE
Engine Type V6
Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm)
Displacement 186 CID (3,046 cc)
DIMENSIONS
Shaft Length 25 in. (635 mm)
Weight 528 lb. (240 kg)
GENERAL
Propshaft Horsepower 175 HP (131 kW)
Full Throttle Operating Range 5000-6000 RPM
Gear Ratio / Shift F-N-R
Cooling Water-cooled with thermostat & pressure-controlled
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.

SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
KEY FEATURES
Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.

Name:marine air vent head
Material: cast iron
Working pressure: 5k, 10k
Size: dn40 ~ dn500
Sandard: jis, asme, gb
Lead time: around 35 days
Certificate: abs , bv , ccs , dnv , gl , lr , kr , nk , rina , rs

FT Marine mushroom vent head
Mushroom Vent Head
Fungus-shaped Ventilated Canister For Marine Use

1.Using range & purpose

It can be fixed on the natural and mechanical ventilated devices on the hypaethral decks of all sorts of ships for ventilation.

2.Operation Standards

Technical conditions of ventilators' manufacture, experiment and check-accept accord with GB/T295-2000«Fungus-shaped ventilated canister For Marine Use».
Main products list:
JCZ(CZ) Series marine axial flow fan for ship use
CBZ series marine explosion-proof axial flow fans
JCL(CLQ)series marine centrifugal ventilator fan
CBL series marine explosion-proof centrifugal fan
CZF series marine axial-flow fans
CZT Series Marine Ventilation fan for ship use 
CQ series Marine High pressure centrifugal ventilator
CGDL Series marine or navy high efficiency low noise centrifugal fans
CWL(CXL) series marine small-size Centrifugal fans
CWZ series marine or navy small-sized axial fans
CLZ series Marine high pressure axial-flow fans
CDZ series Marine low noise axial fans for marine or navy use
CBGD series marine explosion-proof (non-sparking) centrifugal fan
CSL series centrifugal water power fans for marine use
CSZ series water driven gas free axial flow fans for marine or navy use
FT-A/B/C/D/E/F Type Marine mushroom air vent head
4-72 Series Industrial Centrifugal fan
4-79 Series Industrial Centrifugal blower
4-68 Series Industrial Centrifugal ventilator
9-19 Series Industrial high pressure centrifugal fan
9-26 Series Industrial high pressure centrifugal blower fan
9-13 Series Industrial high pressure air blower fan
9-10 Series Industrial high pressure exhaust fan
G/Y4-73 Industrial high temperature boiler use centrifugal fan
G/Y4-68 Industrial high temperature boiler ventilation fan
T35-11 Industrial axial flow fan
SJG Industrial mix flow fan
HTF Series Industrial high temperature smoke exhaust fan
DZ Series Industrial low noise axial flow ventilator
C6-48 industrial dust exhaust blower fan
Y8-39 Industrial boiler use centrifugal blower fan
Y9-38 Industrial high temperature centrifugal ventilator fan
Other ventilation accessory

ZB1702-5
Essential details Type: Air vent cover
Material: Stainless steel 316, Stainless steel 316
Size: 5 inches
Place of Origin: Shandong
Brand Name: Richwits
Product name: air vent cover
packing: opp bag + box+carton
OEM: available
Factory directly supply: yes
port: Qingdao/Tianjin
Technique: Forging
Speficication of air vent cover




This air vent cover is produced in stainless steel 304 material , which is solid and durable
The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion
resistance .Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.

Contact us now for more details!Wudi Zhibo Metals Co., Ltd owns an investment castings foudnry and a machining shop. We can do casting , machining and polishing. Zhibo is a real factory !
What we can produce ?
1. rigging hardware like snap hook, shackles, turnbuckles, rope clips , thimble, bolt and nut, ect
2. marine hardware like cleat, anchor, hinge, plate, marine latch, deck filler,bollard , stanchion, ect.
3. Zhibo also can cast parts per customer's samples or drawings
What is our main material ?
Stainless steel 304/316

Since the establishment of our company, Wudi Zhibo Metals Co., Ltd adhere to the idea of â??Quality First, Creditable Management " and the cooperative attitude of the "Win-Win", all the staffs are devoted to the technological innovation, improving designing and producing capacity for the purpose of creating valuable enterprise brand and meeting the requirement of clients.

Welcome the friends worldwide to visit our company and make business negotiations.

Marine Exhaust Hose
Designed for marine applications, MIC Marine Exhaust's wet exhaust hoses will not corrode or break. They absorb the vibrations of engine motion and resist extreme temperatures for long term use.

Marine exhaust hoses are key components in a marine exhaust system. They can be used as flexible connectors to circulate, transfer and cool engine water. These hoses are easy to install and offer excellent vibration dampening compared to rigid piping or tubing. Marine wet exhaust hoses are particularly effective because they mix seawater with exhaust gases. The seawater is injected into the exhaust stream to cool the exhaust gases, thereby significantly reducing the temperature of the exhaust gases before they leave the vessel.

Benefits
Durability and flexibility: Designed to withstand marine environments, these hoses are durable and flexible, making installation a breeze.
High Temperature Resistance: Our hoses are able to withstand high temperatures, thus ensuring the safe discharge of exhaust gases.
Corrosion Resistant: Made from materials such as rubber and silicone, they are resistant to corrosion from salt water and other harsh environments.

Marine Wet Exhaust Systems
Water is injected into the exhaust system to cool the gas, which then passes through the outlets. The injected water reduces the temperature of the exhaust gases from as high as 2000F to less than 250F. This is enough to cool the gas for the use of flexible silicone hoses. Water-cooled exhaust does not cause fires and does not require insulation.

ZB0631-22
Name
riser vent
Material
stainless steel 316
Suface finish
high polishing
MOQ
1 PC
Technqiue
investment casting
Packing
bubble bag+ carton
Brand
Richwits
Speficication of SS riser vent


This riser vent is casted in stainless steel 316 material by investment casting, which is solid and durable
The surface is polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion
resistance .

The material for the bolt is SS 316 also
A flat base for deck mounting and stainless steel pin for easy top removal.

Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon.

Most of them can be supplied from stock. Low MOQ is acceptable.
Contact us now for more details!