Decorative Metal Mesh

When designing the elevator decoration,first consider the use of the elevator,and then consider the selection,processing and installation of the elevator decoration materials with reference to the decoration style of the building. 1. passenger elevator Passenger elevators are elevators designed to transport passengers.They are mainly used in hotels,restaurants,large shopping malls and other places with large passenger traffic. Therefore,a variety of materials and combinations of colors are used.The interior materials are extremely elegant,and the line and shape are extremely versatile.Focusing on each nuance,it reflects the noble and quiet,luxurious style,solemn elegance,safe and comfortable ride.Space gives a pleasing visual experience.And the use of different color temperature defferences and different light source treatment,can be dim yellow warm,bright and brisk,reflecting the different and elevator decoration style,to creat the best atmosphere for a variety of environmental requirements. 2 hospital elevator When the bed elevator chooses to decorate the material of the car,it must be able to prevent corrosion.Because there are many patients in the medical elevator,it is necessary to disinfect the effect the interior of the car frequently.The inner wall,floor,ceiling,handrails,etc.of the car are exposed to some chemical agents,so materials that can prevent corrosion are needed to decorate the interior of the car.Secondly,it is necessary to make approprite anti-collision buffer treatment for the door door cover and the front wall of the car,so as to protct the door cover and the front wall of the car,and to reduce the impact when colliding and protect the patient feel cold and fear,to reflect a warm and comfortable feeling,so that the patient can temporarily forget or reduce the physical pain. 3 residential elevators Residential elevators are more concerned with the decoration of people of different ages and different cultural qualities. Children's play in the car may collide with the armrest or the car wall,the old man may have difficulty in operating the selection duo to bad eyes;people with low quality may smoke in the car causing fire;the drunk may be on the sedan.The compartment.the hall door and the control panel are destroyed.In addition,residential elevators may be hit by items such as furniture and bicycles.Therefore,when decorating a residential ladder,the car wall decoration should consider some materials that can be buffered,but it cannot be decorated with flammable materials such as wood.The buttons and floor indicators of the steering wheel in the car should be of appropriate size and be chosen for eye-catching colours,taking into account their high degree of vandalism and safety after being destroyed.

Description Decorative Metal Mesh is made from metal rod or metal cable with weaved technology, it is a new kind material behalf of the professional and environmental protection . The product gradually mature and towards the international market. Decorative metal mesh divided into curtain metal mesh, chain link mesh, perforated metal mesh, ring metal mesh and special metal mesh etc. It is widely used as curtains, screens for dining hall, isolation in hotel, ceiling decoration, architectural, balcony, porch, stair, airport, exhibit hall etc. There are high quality stainless steel, aluminum, brass, copper alloy and other materials, Also can be coated special surface treatment, such as gold plating, silver plating etc. It is very beautiful and easy to install, th e corrosion resistanc e is strong, filter performance is good, and also it is versatility, unique texture, variety of colors, durabi lity and flexibility. Especially it is very easy to clean, to better meet the requirements of style and personality from designer. Such as when it is used as curtains, it offers a variety of color changes with light and gives unlimited imagination. materialCable diaCable pitchRod diaRod pitchWeight mmmmmmmmKg/m2 SUS 304/316/316l0.75mm*426.41.53.05.3 1.00mm*436.02.04.07.0 0.60mm*25.50.82.32.6 2.00mm*450.03.06.011.56 3.00mm*340.03.011.09.5 2.75mm*240.04.014.59.41 1.05mm*216.04.07.014.9 2.00mm*380.03.010.06.6 1.60mm*13.21.26.05.0 2.00mm*13.11.25.010.0 2.50mm*15.02.06.012.2 Packaging & Delivery Delivery Lead Time : 15 daysMinimum Order : 100 meters

Decorative Perforated Metal Mesh Decorative Wire Mesh Decorative Metal Mesh Decorative perforated metal with versatility, aesthetic has a good popularity in buildings. We also accept other custom sizes. Decorative perforated metal has a wide application, such as making cabinets, backgrounds, walls, baskets and furniture. Decorative perforated metal is a sheet or coil of material with all kinds of hole shapes. Specification Material Plain steel, mild carbon steel, aluminum, stainless steel (302, 304, 304L, 316, 316L), brass, copper. Open Area 35% 68%. Surface Treatment Galvanized, PE/PVC coated and powder coating. Thickness 0.225 mm. Hole Patterns Round hole, square hole, slotted hole, hexagonal hole and decorative hole. Hole Diameter 0.2100 mm. Packing Coiled plate - in water-proof plastic bags then in wood pallets. Flat plate - in plastic film then in wood pallets. Feature Ventilation, light and air penetration and anti-sand property. High strength and security. Perfect anti-corrosion property and rust resistance. Aesthetic appearance. Various choices in opening sizes/areas, gauges and materials, hole shapes/patterns. Wide application for architectural and decorative aspects. Low maintenance. Easy installation.

metal decoration net includes: metal mesh curtain, metal curtain, curtain curtain, metal curtain, copper curtain, spiral metal mesh curtain, curtain wall metal mesh curtain, ceiling, ceiling metal mesh curtain. With the technological advancement of the building decoration industry, building decoration materials are constantly emerging. As a representative of the new environmental protection materials in the industry, the building metal decoration net has attracted wide attention from the industry. The products have gradually matured and can be promoted in the landmark architectural decoration project. And gradually move to the international market.

Perforated Metal Mesh is created by punching a series of holes in a solid material. Holes can be round, square, rectangular, slotted, or decorative. It is available in wide range of hole sizes and patterns. The perforated pattern can be straight or staggered. It has an unpolished surface. To improve the service life or beauty, the surface can be galvanized or powder coated. Thickness or gauge Thickness of the metal sheets do not change during the perforation. Normally thickness is expressed in gauge. However, to avoid possible misunderstanding, we would suggest expressing them in inches or millimeters. Width and length The most common width and length are as following 1000mm x 2000mm 1220mm x 2440mm 1250mm x 2500mm 1250mm x 6000mm 1500mm x 3000mm 1500mm x 6000mm However metal mesh also do other sheet sizes according to customers' requirements. Margins Margins are the blank (un-perforated) area along the edges of the sheet. Normally the margin on the length are 20mm minimum, and margin along the width can be 0 minimum or at customers' requests. Hole arrangement Round hole are normally arranged in 3 types: Other hole patterns and hole arrangements can be custom made. Round hole, 60 , staggered Round hole, 45 , staggered Round hole, straight row Cutting & folding metal mesh can do cutting and folding after perforating.

Decorative Expanded Metal Mesh Wall Panels Aluminum Expanded Metal Mesh which is made by aluminum sheet or aluminum alloy sheet,is one of the best option for wall cladding panels,the light weight and cost-effective price will give designer a good work. When ordering Decorative Expanded Metal Mesh Wall Panels,pls provide below details: Material:aluminum Thickness :3mm Strand width:10mm LWDXSWD:80X40mm Sheet size:1.22MX2.44m Framed or not Surface finish:PVDF Coated,powder coated,or anodized Various surface finish are available for Decorative Expanded Metal Mesh Wall Panels: PVDF coated, Powder Coated Anodizing Welded Framed When the colorful Aluminum Expanded Metal Mesh is used for architectural facade decoration for outdoor curtain wall, due to the unique sturdiness of its metal material, it can easily resist the adverse weather factors such as storms, and is easy to maintain. From the perspective of viewing, the metal mesh With the characteristics of silk, it gives people a visual enjoyment. When used aluminum expanded metal mesh as an indoor roof or partition wall, its unique permeability and luster give more space for aesthetic pleasure. Features of Aluminum Expanded Metal Mesh Facade: no rust, beautiful color & appearance, sturdy and durable, high quality and high grade. Aluminum Expanded Metal Mesh has light weight for easy transportation. Aluminum Expanded Metal Mesh is not easily bent, and suitable for security mesh applications. Decorative properties for ceiling or room dividers. Good corrosion resistance for long service life.

Decorative hole perforated metal mesh Decorative Metal Mesh Decorative Wire Mesh Product Name Decorative hole perforated metal mesh Material Stainless steel, aluminum, cooper, plain steel, pre-galvanized steel, etc. Thickness 11 gauge 24 gauge. Width 36" 48". Length 24" 120"

Anping Tenglu metal Wire Mesh Co.LTD Decorative Expanded Metal Mesh Decorative Expanded Metal is a self-contained piece of metal which won't unravel, thus retaining its shape after years of constant use. The same properties making standard expanded metals so applicable to today's needs�lightweight, strength, rigidity, free passage of air, light, heat, sound and adaptability to finishing processes are also present in decorative expanded metals plus functional attractiveness. Functional because the decorative mesh pattern provides control of mass by regulating flow through direction and v olume, yet attractive; giving the sales appeal sought by the industrial designer. Decorative expanded metal mesh is designed expanded metal for use in architectural and decorative applications. These designs can be used to provide privacy and to control light and air while allowing visibility. Sun screens,decorative ceilings, room dividers, and building facades are only a few of the possible design possibilities. Decorative expanded metal mesh is available in carbon steel, aluminum and other alloys in a wide range of patterns.

Description Introduction of Perforated Metal Mesh Perforated metal mesh is extremely versatile and lightweight. The most common applications include: screens, diffusers, guards, filters, vents and more. We can perforate most any metal, plastic or rubber material with round, square, slotted, decorative or architectural holes. Perforated Metal Mesh MaterialMild Steel, Aluminum, Stainless Steel, Galvanized steel, other metals and materials Surface Finisheshot-dip, galvanizing, anodizing, ename ling, power coating, painting, etc Applicationsbuilding cladding, facades, decorative false-ceilings, balustrades, balcony panels, arcades and sunbreakers, windows blinds, gates, fences, screens, grates, safety covering, grates etc. Types of Perforati on Rv round holes stagge red pitchRpg round holes deep square pitchLv slot holes staggered pitch Rg round holes square pitchQg square holes square pitchLg slot holes square pitch Rpv round holes deep staggered pitchQv square holes staggered pitchSs decorative holes Sheet Metal ThicknessMetal Sheet Format Stainless Steelmax 12mmSmall format1000 x 2000 mm (w x l) Stainless Steelmax 8mmMedium format1250 x 2500 mm (w x l) Non-ferrous metals can be perforated after testing on a sample.Large format1500 x 3000 mm (w x l) It is possible to modify the size of the format according to your wishes or drawing sent to us.