Lab Use Microsyringe

Shakers and stirrers are used to mix or agitate liquids in labs. Shakers rapidly shake containers, while stirrers continuously mix solutions for uniform consistency.

Racks and stands are used to hold lab equipment securely. Racks are designed to organize test tubes, flasks, or other items, while stands provide support for equipment like burettes, thermometers, or other instruments during experiments.

Tubes and vials are used for storing and handling samples in labs. Tubes (like test tubes) are cylindrical containers used for mixing or heating small amounts of substances, while vials are small, sealed containers used for storing liquids, powders, or samples.

Laboratory Glassware Beaker is one of the most common pieces of glassware used in a laboratory. It is majorly used to hold, mix, aggregate measurement, pour, or in heating of reagents.Two types of Glass Beakers used in the labs are Tall-Form Beaker and Low-Form Beaker. Further, depending on their application, they can either be Graduated/ Non-graduated, with/ without spout.

Spectral Tube Power Supply and Mount

This system is easy-to-use and inexpensive, with a variety of safety features that make it suitable for beginning labs. Mount any of the 8 different spectral tubes into the power supply and turn it on. The 26cm long tubes a re capillary-thin over the middle 10 cm, providing sharp, bright spectra.

Features Student Safety:� The tubes mount from the front of the supply and snap into moulded sockets that fully enclose the conducve ends. The all metal case is electrically grounded.

Spectral Tube Safety: A c u r r e n t l i m i n g transformer protects the tubes. A protecve shield also helps safeguard the tubes, while blocking unwanted ambient light for clear viewing


Power Requirements: 220VAC, 50Hz.

NG500 lab use nitrogen generator
Product Description

NG500 Nitrogen Generators Lab nitrogen gas

Working Principle

Nitrogen generator uses the electrocatalysis method to separate air gas Stable and pure air enters electrolysis cell and oxygen in the air is separated then left nitrogen gas is outputted

Application

Carrier gas for various brands of GC and GCMS
Make up gas for GC
Supplementary gas

3Gas for Gel Permeation Chromatograph
4LCMSLiquid ChromatographMass Spectroscopy and Thermal Analyzer
5Other field that ask pure N2

Features

1 Program control Nitrogen gas could be adjusted automatically according to usage flow under stable pressure and flow

2 Advanced technology It uses noble metal as catalyst high catalytic efficiency and large nitrogen production

3 Twolevel catalysis Oxygen content in nitrogen is less than 3ppm

4 Lower moisture in nitrogen gas

Technical Parameters
Model NG300 NG500
Output Flow mlmin 0 300 0 500
Output Pressure 042
Nitrogen Purity 99999 compared with O2
Input Air Pressure 04
Power Voltage V 22015 50 60Hz
Input Power W 110 200
Weight kg

Made of Complete SS 304 GMP Model.Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 �¼ guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.

Features

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of SS 304
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.



Technical specifications

Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz

Economic Lab Viscometer Digital.It is widely used to determine solvent-based adhesives, latex,Bio Chemicals, Paints, Coatings, Cosmetics, Inks, Pulp, food, etc.

Microprocessor Based.
LCD display.
Selectable Speed.
Temperature Monitoring.
Optional Accessory - Low Viscosity Adaptor (0 Spindle)

Technical Specifications - 
Digital Viscometer -: DV50 & DV55

Measuring range-  50 mPas to 1,00,000 mPas(DV50) 50 mPas to 20,00,000 mPas(DV55)
No of speed - 4 (DV50) 8(DV55)
Speed Option : 6,12,30,60 rpm( DV50) 0.3, 0.6,1.5,3,6,12,30,60 rpm(DV55)
Measuring Accuracy-±2% (Newtonian liquid)
No of Spindle -  (rotor) 4 Spindle, (Optional 0 Spindle, or 1 ~50 mPas )
Ambient Temperature - o o10 C to 50 C
Interface -  RS232C
Display - LCD
Single Measurement  : Auto Stop Afer measurement result is stable, spindle stop automatically
Power Supply : DC Adaptor, Using AC 220V/50Hz
Packing Dimension -  (LxWxH) 410 - 335 - 370 mm
Net / Gross weight : 4.6 kg / 7.5kg

Sun Lab Equipments has marked its prominence in the global market as one of the top ranking Automatic Digital Colony Counter Exporters from India. We manufacture Digital Colony Counter from mild steel, which is duly power coated for long life.

Its soft touch membrane switches and digital LED display count simplifies the working of the equipment. The varies other features of Electronic Digital Colony Counter offered by us as increased in its demand in scientific laboratories, pharmaceutical industry etc.