Advanced Ultrasonic Spirometer Device

The Ultra Low Temperature Deep Freezer (-86C) is an essential medical equipment designed for hospital use, ensuring the safe storage of invaluable biological samples and vaccines. This advanced freezer boasts a remarkably low operating temperature, safeguarding the integrity of sensitive materials. Its precise temperature control, digital display, and alarm systems guarantee optimal sample preservation. With a spacious interior and adjustable shelving, it accommodates a variety of sample sizes. The ultra-efficient compressor minimizes energy consumption, while its robust construction ensures durability. Equipped with secure locking mechanisms and backup power support, it offers peace of mind for critical storage, making it an indispensable asset in any hospital's medical arsenal.

How to choose the suitable Pulmonary Function Testing device Ultrasonic type is the best choice.
In recent years, with the rapid development of modern electronic technology and bioengineering, Pulmonary Function Testing devices are updating continually, and they are more sophisticated and perfected gradually. Traditionally water seal Pulmonary Function Testing device, wedge Pulmonary Function Testing device,� dry rolling-seal Pulmonary Function Testing device are phrased out of market because they could not connect with electronic computers.
After 2000, ultrasonic Pulmonary Function Testing devices have been used internationally to replace traditional differential pressure Pulmonary Function Testing device, turbine Pulmonary Function Testing device and thermal Pulmonary Function Testing device. The main reason is that these three principles have some limitations as below:
1. Hygiene problem: it is difficult to clean thoroughly, and there is a very high risk of cross-infection in long-term use;
2. Unable to measure lower flow;
3. Heavy reliance on gas composition and temperature;
4. Calibration and adjustment required

Principles of ultrasonic Pulmonary Function Testing device
The ultrasonic time difference method uses a pair of ultrasonic transducers to alternately (or simultaneously) transmit and receive ultrasonic waves. By observing the difference in the propagation time between the upstream and the backward flow of the ultrasonic in the medium (gas or liquid), the fluid velocity is measured indirectly, and then calculate the flow data based on fluid velocity.
The flow measurement based on the ultrasonic principle is only influenced by the flow and geometry, and accuracy will not be affected by temperature, gas composition, humidity or pressure. So it is a perfect alternative to differential pressure and turbine principles, and is the best choice for Pulmonary Function Testing device.

I.Main introduction
This machine is a modern automatic masks production machinery and equipment, the use of advanced high and new technology, professional engineering personnel to research and development, is the production speed, high stability configuration is the most complete mask device, just put the device in the feeding rack production material, modulation of Ok, after the machine automatic production to finished product only needs one single device staff can (who also can operate many sets of such equipment), fully realized the full automation production, using ultrasonic welding equipment, style beauty, health, environmental protection.

II. Equipment performance
1. The equipment needs to be three or four roll non-woven mask through ontology machine overlying together (the bridge of the nose synchronous automatic cutting out joint), automatic positioning to non-woven automatically be closed after fold, then cut mask ear after pressing mask on shaping automatically cut masks, masks by the belt transmission to the packaging machine, ship out mask packing directly.No other process, greatly save labor costs, is the most practical and mature a full automatic mask production line.
2. The equipment will not cause adverse effects on products, including deformation, damage and appearance scratching of materials.
3. The machine USES two ultrasonic waves of 15K2600W. This (ultrasonic welding mask machine production line) is mainly used for non-woven cloth production of planar one-time mouth cover shaping, with simple operation and stable operation
4, compact structure, the frame is made of aluminum alloy profiles, strong and beautiful without rust, convenient loading and unloading materials.
5. The steady speed of the machine is about 100 to 120 pcs per minute

Model:SKLON-N models ultrasonic cell processors Easy to operate.Crushing capacity from 0.5ml to 1200ml .
(sonicator,ultrasonic homogenizers,ultrasonic processor,ultrasonic cell crusher,ultrasonic cell disrupter)

Parameters:

Models Ultrasonic Frequency(KHZ) Maximum Output Power Duty Ratio(%) Optional Variable Amplitude Lever(¡é) Included with Machine Capacity
per time(ml) electricity Supplyl(V) Temperature Control
SKL150-IIN 20-25 150 W 1-99% 3 mm 6mm 10-100ml 220/110 No
SKL250-IIN 20-25 250 W 1-99% 3 mm 6mm 10-200ml 220/110 No
SKL650-IIN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-500ml 220/110 No
SKL650-IIDN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-600ml 220/110 YES
SKL1200-IIIN 19.5-20.5 1200 W 1-99% 15,25mm 20mm 50-1000ml 220/110 No
SKL1200-IIIDN 19.5-20.5 1200 W 0.1-99.9% 15,25mm 20mm 50-1000ml 220 or 110 V YES
SKL1800-IIDN 19.5-20.5 1800 W 0.1-99.9% 25,28mm 25mm 50-1200ml 220 or 110 V YES


Ultrasonic Dispersing and Deagglomeration:
The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices. Ultrasonic cavitation generates high shear forces that break particle agglomerates into single dispersed particles.

Ultrasonic Emulsifying:
Emulsions are dispersions of two or more immiscible liquids. Highly intensive ultrasound supplies the power needed to disperse a liquid phase (dispersed phase) in small droplets in a second phase (continuous phase). In the dispersing zone, imploding cavitation bubbles cause intensive shock waves in the surrounding liquid and result in the formation of liquid jets of high liquid velocity. At appropriate energy density levels, ultrasound can well achieve a mean droplet sizes below 1 micron (micro-emulsion).

A wide range of intermediate and consumer products, such as cosmetics and skin lotions, pharmaceutical ointments, varnishes, paints and lubricants and fuels are based wholly or in part of emulsions.

Ultrasonic Cell Disintegration
This effect can be used for fermentation, digestion and other conversion processes of organic matter. After milling and grinding, ultrasonication makes more of the intra-cellular material e.g. starch as well as the cell wall debris available to the enzymes that convert starch into sugars. It does also increase the surface area exposed to the enzymes during liquefaction or saccharification. This does typically increase the speed and yield of yeast fermentation and other conversion processes, e.g. to boost the ethanol production from biomass.ultrasonic treatment can disintegrate fibrous, cellulosic material into fine particles and break the walls of the cell structure. This releases more of the intra-cellular material, such as starch or sugar into the liquid. In addition to that the cell wall material is being broken into small debris.

Ultrasonic Cell Extraction
The extraction of enzymes and proteins stored in cells and subcellular particles is an effective application of high-intensity ultrasound, as the extraction of organic compounds contained within the body of plants and seeds by a solvent can be significantly improved. Ultrasound has a potential benefit in the extraction and isolation of novel potentially bioactive components, e.g. from non-utilized by-product streams formed in current processes.

Primary Function: Ultrasonic Distance Area and Volume Laser Measurement Device
Maximum / Minimum Distance: 0.5M to 18 meters
Accuracy: +/-0.5 %
Working Temperature: 32 F to 109.4 F
Laser: Class II Laser Product
Output: 1mw
Power Source: 1 x 9V Battery
Main product dimensions: 155mm X 70mm X 32mm (L X W X D)
Main product weight: 102gm

Package Details:
Ultrasonic Distance, Area and Volume Measurer
Instruction Manual - English
Ordering from PlusBuyer provides you with the following benefits:
Orders processed and shipped within 24-hours
12 month warranty
In-house QC
Member discounts
Award winning customer support
Quantity order discounts
Worldwide Shipping
Certification: CE, FCC, RoHS

Rotary Bar Screen is an advanced solid-liquid separation device which has been widely used in municipal wastewater treatment plant, pre-treatment device for domestic effluents, municipal rainwater & sewage pump station, water intake of water supply plant & cooling water of power plant. It can also be used for industrial wastewater treatment, such as textile, printing and dyeing, food, fisheries, paper making, brewing, slaughtering and tanning industry. It is regarded as the ideal solid-liquid separation equipment in water treatment field.

3 In 1 NC Servo Straightener Feeder W/Uncoiler

Save Looping Space, Increase Safety Coiled material is from uncoiler through both left and right free guide rollers with advance photo sensors keeps looping. Through the opener device and bending roller system feeding the coiled material from up to down, passing opener device, coil tip flatness device, pinch rollers, work rollers, feed rollers to make the coiled material passing in an excellent smooth feeding

STANDARD ACCESSORY:

Electric eye loop control system

Feed and straightener rolls hard chrome plated

Outgoing catenary to assist and support the material

Hold down arm device

Feeding line easily adjusted by advance worm gear screw jacks device

Uncoiler with inverter control

Reference indicator adjuster

Eccentric Roller (Upper)-easy to set up the up curve or down curve feeding exit direction

Hand-set coil width guide at outlet side

Hand-wheel-adjusted coil width guides at straightener inlet side

Threading table device

Coil tip de-bender

Uncoiler with air disc brake

A-frame type coil keeper



OPTION:

LIHAOS coil car



Features

1. Flexible operation mode: All the functions of the feeder are concentrated on the PLC and a portable knob. The operator can fix all the movement functions of the device in one place.So dont worry about operating or wasting time because there are too many function keys.

2. High efficiency and safety: It reduces unnecessary time and improves work efficiency that mechanical action instead of manual operation. And it has a large number of auxiliary functions of feeding and supporting materials, so that the operator can keep away from the material to the maximum extent.

3. Convenient control mode: Users can freely switch between punch master or device master according to their needs, which maximizes the adaptability of the device and save costs for users.

4. Reasonable footprint: While Lihao NCHF series are powerful, the form factor are also the most reasonable in the industry, which can maximize the cost of the site.

5. Strong control system compatibility: The NCHF series uses a full set of Japanese Mitsubishi control systems, which are compatible with various standards at home and abroad. Users do not need to worry about data conversion and other issues, and can directly operate.

6. Reasonable design: The NCHF series is the first product in the industry to introduce industrial design. While ensuring the basic performance of the equipment, it maximizes the visibility of the equipment and improves the comfort of operation.