Microscope For Mobile Phone And Laptop Soldering

SATINATED GLASS

The acid etching or satina process is the removal of silisyum particles from the surface of glass using acid. In this way microscopic cavities occur on the glass surface and due to the refraction occurring in different directions our eyes perceive the glass to be white.

It's greatest advantage against sanded glass is that it does not allow fingerprints and that it's cleaning is much easier. It has a much finer surface compared to sanded glass.
â??
Our satina products are usually used in the interior decoration and furniture sectors. We can process clear float, extra clear, tinted ,reflective glasses and mirrors as a satina glass.

Our satina products can be tempered, curved , and laminated.

FEASIBILITY

Max. Size: 2500 x 3210 mm, Max. Thickness: 19 mm

Min. Size: 1605 x 2250 mm, Min. Thickness: 3 mm

1. 7101 microscope slide ground edges
2. 7102 microscope slide unground edges
3. 7103 microscope slide single concave, ground edges
4. 7104 microscope slide double concave, ground edges
5. 7105 microscope slide frosted one end on one side, ground edges
6. 7105-1 microscope slide frosted one end on one side, unground edge
7. 7106 microscope slide frosted both end on one side, ground edges
8. 7107 microscope slide frosted one end on one both sides, ground edges
9. 7107-1 microscope slide frosted one end on one both sides, unground edges
10. 7108 microscope slide frosted both end on both sides, ground edges
11. 7110 microscope slide frosted on one side, ground edges
12. 7111 microscope slide frosted on double sides, ground edges
13. 7105-s microscope slide colour frosted one end on one side, ground edges
14. 7107-s microscope slide colour frosted one end on one both sides, ground edges

Cover glass 12* 12mm , 14* 14mm, 16* 16mm, 18* 18mm, 20* 20mm, 22* 22mm, 24* 24mm, 24* 32mm, 24* 40mm, 24* 50mm, 24* 60mm

Quotation and samples is always ready for you. Welcome for the inquiry.


Michael yu

Sales manager

Standard exporting packing

Decade Resistance Box are precision instruments intended for general laboratory use, R&D and educational purposes. These are used as a multiplier, shunt, substitution resistor, or as an arm for AC or DC bridges.

Specifications
Metal Film Resistor Accuracy 1%
Power Rating 1Wat
Maximum Working Voltage 500 Volts.

PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit.

Features:
01. On-board Function Generator.
02. Transmitter : 1 No.
03. Receiver : 2 Nos
04. Fiber Optic Analog Link.
05. Fiber Optic Digital Link.
06. Signal strength indicator.

Technical Specification:
01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible.
02. Receiver : 2 Nos. silicon photo detectors
03. Modulation : Intensity modulation.
04. Driver Circuit : Analog and digital configuration for 635 nm LED.
05. Analog Bandwidth : 35KHz.
06. Digital Bandwidth : 50KHz.
07. On-Board Function Generator :
08. Sine Wave &TTL Square Wave :
09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz
10. Amplitude : 0 to 4Vpp. (Except Square)
11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER
12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power.
13. Fiber Optic Cable:
14. Type : 1000 micron Step Index, Multimode Plastic Fiber
15. Fiber Lengths : 1&5 Meter.
16. Power Supply : GND, +5V, +12V, -12V at100mAINT.

Experimental Training Board has been designed specifically to study the behavior of the Reactive Elements and Time Dependent Network Analysis. Practical experience on this board carries great educative value for Science and Engineering Students.

Object:
01. To study Charging & Discharging of a Condenser.
02. To Calibrate D.C. meter for A.C. voltage measurements.
03. To construct the vector (phasor) diagram for series L-R circuit and to calculate the power factor and "Q" at 50 Hz.
04. To study series LCR resonance circuit and its "Q".
05. To study series L-C resonance circuit and from it to find out the true value of "L".
06. To study series C-R circuit.
07. To study different types of filters.
08. To study the parallel R-C resonance circuit.
09. To study the parallel L-C resonance circuit and to find its "Q".
10. To verify circuit laws.
11. To find out the impedance and reactance of LCR reactive elements and to plot their reactance curves.
12. To plot "LISSAGOUS" figures.

Features:
The board consists of the following built-in parts:
01. Mains Transformer having secondary tappings of 10V, 20V, 30V, 40V, 50VA.C. at 500mA.
02. D.C. Voltmeter, 65mm rectangular dial with switch selectable ranges of 10V, 20V, 30V, 40V and 50V.
03. Four Rectifier diodes.
04. SPDT switch.
05. Potentiometer and adequate no. of other electronic components.
06. Mains ON/OFF switch, Fuse and Jewel light.
* The unit is operative on 230V ±10% at 50Hz A.C. Mains.
* Adequate no. of patch cords stackable from rear both ends 4mm spring loaded plug length ½ metre.
* Good quality, reliable terminal/sockets are provided at appropriate places on panel for connections & observation of waveforms.
* Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.

Experiments:

Study of Reflex Klystron
Frequency, Guide Wavelength Measurement
SWR, Reflection Coefficient Measurement
Impedance Measurement

Instruments:
SKPS 1
VSWR Meter 1
Components:
Cooling Fan1
Detector Mount 1
Fixed Short 1
D.R.F. Meter1
Isolator 1
Klystron Mount 1
Matched Termination1
Movable Short1
S S Tuner1
Slotted Section 1
Tunable Probe 1
Variable Attenuator 20 dB 1
Wave Guide Stand 4
Accessories:
BNC to BNC Cable2
Mains Cord 2
Op. Manual 1