Roller Standard Lmr Series

Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.

The latest XB series gear reducers for roller presses includes totaly 33 models with transmission powerup to 4,000kW and a torque transmission capacity up to 5300KN.m.

JH series gear reducers for cement kilnsare involute cylindrical gear units with parallel shafts which has four reduction stages.This series has four basic structure including over 50 types.Thanks to the standardized,series and modulated design,the reducers can be manufactured according to standard or specific requirements at customers'choice with good reliabiity and maintenance.

Pressure Sensitive Hotmelt Adhesive For Label and specialty Tape Industry
These hotmelt pressure sensitive adhesives
(HMPSA) are very user friendly and are offered in
"easy melt forms". Our range of Turbomelt HMPSA's
can be applied using standard roller or slot die
applicators.
The Labels and Tapes made using HMPSA exhibit
excellent peel and shear strength.

ANSI or British standard short pitch roller chains, solid bushing type available for stronger strength requiment.

Application Industry
Material Handing Equipment Food and Beverage Lifting and Stacking Wood Processing Parking System AGV mobile robot Vessel Chains Plastic Vacuum Forming Machine Glove Making Agriculutrual Equipment Fruit Sorting Cement Industry.

These products have been used to carry loads from tens of kilos up to hundreds of tonnes.
To use a combined roller bearing, a hole the same size as the spigot on the rear of the hub is drilled or milled in a steel member. The hub is then welded into place, filling the 45º weld fillet around the circumference of the spigot with weld.
An optional mounting plate is available that allows the user to pre-weld the bearing to the plate and then attach the plate using bolt and nut through clearance holes or machine screws into the threaded holes in the plate.
In use, the combined roller bearing engages in a C- or H-section profiled steel section. The radial roller engages on the flanges of the profiled section and the axial roller engages on the web of the profiled section. These sections are much thicker and heavier in section than standard beams or columns. The profile is formed to exactly match the bearings outer profile.
MR964 MR965 MR966 MR967 MR968 MR4267 MR4639 MR.051 MR.052 MR.053 MR.053 MR.055 MR.056 MR.057 MR.060 MR.061 MR.062 MR.063 4.072 4.073 4.074 4.075 4.076 4.077 4.078 4.0784 4.079 4.080 4.0069 4.0087 4.0019 4.0038 4.0274 4.0088 4.0278 4.0084 4.0275 4.053 4.054-62 4.055-70 4.056-78 4.058-88 4.062-103 4.063-149 4.011-149 4.454 4.455 4.456 4.457 4.458 4.459 4.460 4.461 4.462 4.463 4.072 4.073 4.074 4.076 4.078 4.079 4.080 4.235-89 4.227-108 4.228-123 4.229-149 4.230-185 4.089 4.090 4.091 4.092 4.093 4.055-40 4.057-78 4.075-78 4.058-49 4.059- 101 4.077-101 4.060-108 4.078-108 4.259

4.053 4.054-62 4.055-70 4.056-78 4.058-88 4.061-106 4.062-123 4.063-149 4.011-149 4.454 4.455 4.456 4.457 4.458 4.459 4.460 4.461 4.462 4.463 4.072 4.073 4.074 4.076 4.078 4.079 4.080 4.235-89 4.227-108 4.228-123 4.229-149 4.230-185 4.089 4.090 4.091 4.092 4.093 4.055-40 4.057-78 4.075-78 4.058-49 4.059-101 4.077-101 4.060-108 4.078-108 4.259

:4.053 4.054-62 4.055-70 4.056-78 4.058-88 4.061-106 4.062-123 4.063-149 4.011-149
4.454 4.455 4.456 4.457 4.458 4.459 4.460 4.461 4.462 4.463 4.072 4.073 4.074 4.076 4.078
4.079 4.080 4.235-89 4.227-108 4.228-123 4.229-149 4.230-185 4.089 4.090 4.091 4.092 4.093
4.055-40 4.057-78 4.075-78 4.058-49 4.059-101 4.077-101 4.060-108 4.078-108 4.259ï¼?4.053 4.054-62 4.055-70 4.056-78 4.058-88 4.061-106 4.062

The single-row cross roller slewing ring is composed of two seat rings. It features compact In design, light in weight, high precision and small fitting clearance
As the rollers are 1: 1 cross arrange, it is suitable for high precision mounting and Capable to bear axial force, resultant moment and considerable large radial force
The single-row crossed roller slewing rings are widely used for histing, transporting Engineering machinery as well as for military products.


Inner with the plastic after wooden box.

F2650 f2550 f2647 f2547 f2047 f1947 f2042 f1942 f1742 f2035 f1935 f1735 f1635 f1535 f1335 f2735 f2535 f1235 f1232 f1032 f2728 f2528 f1228 f1028 f2726 f2526 f1226 f1026 f0826 f1026 f0823 f0623.

Product name: scd series pneumatic cylinder
Working temperature: 0~70 degree celsius
Working speed range: 30~800mm/s
Pressure: 0.5~8 kgf/cm
Buffer type: adjustable buffer

Features of scd series standard pneumatic cylinder
1. Double rod type.
2. It's tie rod cylinder.
3. There are several modes of back cover so that the installation of clinder wil be more convenient.
4. Various sizes of cylinders and mounting accessories for your choice.
Remark: the medium used by the cylinder must be fitlered to 40 m or below.