Flexo Printer Slotter Die Cutter Folder Gluer

lead edge feeder with no crush system.
flexo printer with servo motor registration.
sloitter with 8 axis wiht servo motor adjustment.
die cutter unit with servo drive and speed compensation. wiht Serrapid fast wooden die change system.

1. Design Speed: 100m/min.
2. Working speed:60-80m/min
3. Heating type: stream heat
4. Cardan drive with gear box
5. Corrugated roller alloy steel material
6. Expiry width: 1800mm. Corrugated flute roller diameter: 280mm
7. Flute profiles: A,B,C,E etc.
8. Drive positive speed gearbox adopts to low the noise, small gimbal transmission to 9. separate power supply.

Structural Feature

Main corrugated roller: 360mm according to the flute shape different pressure roller 415mm preheat roller  400mm.

Adopt negative pressure design, use less heat,make the core paper can be pressed evenly and attached to the surface of the corrugated roller, make the corrugator shape better.Because the pressure is evenly,the top of the corrugator can be glued more evenly,make the single corrugated paper bond better.

Corrugated roller use 48Crmo alloy steel, though heat treatment, surface through grinding make tungsten carbide treatment.

Corrugated roller and pressure roller use high stability gasbag control system, also have air pressure control buffering function.

Glue quantity control use electric adjust, glue isolation device electric, glue system can operate independently when main machine stop, to avoid glue use up.Glue tank is made of stainless steel.

Movable type glue system, wash easily, maintenance and repair is more easy.

Simple control system and touch screen system, with colorful pictures show the operate sate function choice faliure indication exclude and parameter setting all can act out the machine multi function, easy operation and humanization.

Preset device inside with spray system, adjust the core papers temperature and moisture.

Main,vice corrugated roller and pressure roller bearing all use high temperature grease, to make sure the bearing working life longer and running smoothly.

SF-280S Fingerless Type Single Facer

Structural Features:

Adopt vacuum suction structure, with high-pressure strong blower.Suction with silencer.Gas supply and electrical control cabinet to focus on the same operation cabinet, not less than 1.5 meters away from the host Fully enclosed full operation side

Base and wallboard cast iron wall,Wallboard thickness130mm universal Joints.

Does corrugated roller material adopt 48CrMoalloy steel quenched. Laser hardening. Surface finish, main roll of corrugated diameter 280mm, surface hardness HRC60degree above.The key parts of the tile and pressure roller bearings Wafangdian produce high temperature bearings.

Pressure roller 284mm,surface grinding and chrome-plated cylinder control and remove up and down, 45 carbon steel materials, quenching (with cushioning devices).



Regular Technical Parameters:
Effective width: 1800mm

Operation direction: left or right determined in accordance with customer plant

Design speed: 100m/min

Temperature range: 200 260

Corrugated flute: UV type or UVV type



Roller Diameters Parameters:

Diameter of corrugated roller 280mm

Diameter of pressure roller 284mm

Diameter of glue roller 216mm

Diameter of preheat roller  320mm

Main Technical Parameters And Requirements In Production Line


Electronic control system: fingerless single facer driving part NC thin blade slitter scorer double facer glue machine all adopt frequency motor delta frequency control system.operation interface easy and convenient Speed display control cabinet with each unit speed display, the unit call, emergency stop function.The main relays Schneider brand.

YV5B HYDRAULIC MILL ROLL STAND

technical parameters:
1. the range of clamping paper:MAX2200mm MIN1000mm

2.clamping diameters:MAX�¢1500mm MIN�¢350mm
3.main shaft diameter of paper holder:�¢240mm

4.gas source work pressure(Mpa):0.4---0.8Mpa
5.equipment size:Lmx4.3*Wmx1.8*Hmx1.6

6.single weight:MAX4000Kg
Hydraulic system parameters:

1.Work pressure(Mpa):16---18Mpa

2.lifting hydraulic cylinder:�¢100�?440mm

3.Clamping hydraulic cylinder:�¢63�?1300m

4.hydraulic station motor power:3KW --380V -- 50Hz

5.solenoid valve voltage:220V 50 Hz

Inline Auto Folder Gluer Machine is a machine that connected with Flexo Printer Slotter Die Cutter, which designs to increase the working capacity of machine, and reduce labor cost and labor strength, now this machine become more and more popular among the carton box factories.
consists of Feeding Unit, Printing Unit, Slotting Unit & Die-cutting Unit, is also named as Flexo Printer Slotter Die-cutter, this is one of the machine that used for making Corrugated Boxes, such as Cartons, Boxes, Trays, Displays and etcâ?¦ and it can finish multi-processes, like Feeding, Printing, Slotting, Die-cutting, (Vibrating), Stacking or (Counting Stacking).

80mm Portable BT thermal receipt and label printer support android IOS for mobile printing applications,
After-sales Service:
Return and Replacement, Others, Call Center and on-line Technical Support
Driver program:
WinAndroid/iOS/MacOS/Linux
Barcode Type:
UPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)CODE39/ITF/CODABAR/CODE93/CODE128
QR Code:
PDF-417/Data Matrix/QR code
Memory:
4MB Flash Memory
Instruction Set:
CPCL OR ESCPOS
NV Flash:
256k bytes
Print Media:
Continuous Paper/Black Label Paper/Label Paper
Dielectric Width:
50mm/80mm
Battery:
7.4v/2000mAh Li-Battery
Print Life:
150KM
Certification:
ce, RoHS, CCC