Semi Automatic Microtome

SEMI AUTOMATIC CRYOSTAT MICROTOME
Refrigerated cut Series Semi Automatic Cryostat Microtome - Electronic Control System with
powerful functions & convenient operation, The cooling system incorporates PID
temperature controller and a sealed compressor to ensure quick cooling upto -30C and0
trouble free performance, Large stainless steel chamber permits adequate storage facilities for
housing of microtome, Visual display for section thickness indication, temperature & other
parameters, Lateral displacement feature provided for blade. UV is used for disinfection, Rapid
Refrigeration mode & Specimen retraction function provided (with LCD touch panel) (advance
model).
Section Thickness Range :1 m-60 m, Trimming Thickness Range :10 m-100 m in 10 m
increments, Vertical stroke : 65mm
Specimen horizontal feed : 25mm, Motorized coarse feed: 480 m/sec
Specimen retraction : 5-75 m in 1 m increments, Specimen Orientation : X and Y- axis :
universal 80
Cryo Chamber Temp : -1 to 300C Adjustable.
Cooling Downtime to -300C.
Max. Specimen size : 35x35mm, Quick Freeze Shelf : < - 050C
Chamber Defrosting: Programmable or manual, No. of Freezing Stations: 10.
Operation: Semi automatic
Standard accessories: High profile blades pkt of 50 nos.blades, freezing medium 120ml,
standard chucks, Warranty : 2 years.

Precision meets automation! Our Automatic Rotary Microtome delivers accurate, consistent tissue sections for histological analysis, streamlining your lab workflow.

Features:

LCD Display with Feather Touch Keypad
Section thickness adjustable.
Cutting/Trimming Mode
Fast Forward/Backward Function
Increase/Decrease Section Thickness
Section Counter/Section thickness display
Motorized Feed Drive
Coarse feed speed directions (in both direction) around 300µm/s 900µm/s
Ergonomic standard specimen clamp.
Sturdy knife holder with angle adjustment scale & locking lever.
Disposable knife holder with lateral displacement feature.

TECHNICAL SPECIFICATION:

Section Thickness Range : 0.5µm-100µm

Setting Values: 0.5µm-2µm in 0.5µm increments.

µm-20µm in 1µm increments

20µm-100µm in 5µm increments.

Trimming Thickness Range : 1µm-600µm

Setting Values: 1µm-10µm in 1µm increments.
10µm-20µm in 2µm increments

20µm-100µm in 5µm increments.

100µm-600µm in 10µm increments.

Minimum Setting Value: 0.5µm

Object feed: 28mm

Vertical stroke: 60mm

Specimen horizontal feed: 28mm

Specimen Orientation-x-axes and y-axes : universal 8
  Z-axis: up to 360

Max. Specimen size -50x50mm.

Operation- Manual.

Weight-  : 35 kg.

Standard accessories-: High profile disposable blades pkt. of 50 nos

Precision meets automation! Our Automatic Rotary Microtome delivers accurate, consistent tissue sections for histological analysis, streamlining your lab workflow.

Features:

LCD Display with Feather Touch Keypad
Section thickness adjustable.
Cutting/Trimming Mode
Fast Forward/Backward Function
Increase/Decrease Section Thickness
Section Counter/Section thickness display
Motorized Feed Drive
Coarse feed speed directions (in both direction) around 300µm/s & 900µm/s
Ergonomic standard specimen clamp.
Sturdy knife holder with angle adjustment scale & locking lever.
Disposable knife holder with lateral displacement feature.

Precise cut series Histology Fully Automatic Rotary Microtome - LCD Display with Feather
Touch Keypad, Section thickness adjustable, Cutting/Trimming Mode Fast Forward/Backward
Function, Increase/Decrease Section Thickness, Section Counter/Section thickness display,
Motorized Feed Drive, Coarse feed speed directions (in both direction) around 300μm/s &
900μm/s, Universal specimen clamp, JP Series Disposable knife holder with lateral
displacement feature. Single/multiple stroke sectioning, Sectioning in two speeds, Emergency
brake & safety alarm feature provided.
Technical specifications :
Section/Trimming Thickness Range : 0.5μm-100μm
Trimming Thickness Setting: 1μm-600μm, Minimum Setting Value: 0.5μm
Object feed : 28mm + 2mm
Vertical stroke : 60mm + 10mm
Specimen Orientation: X and Y-axis : universal 80, Z-axis : up to 3600
Max. Specimen size : 50x50mm
Operation : Automatic, Semi-automatic, Weight : 35 kg.
Standard Accessories : Disposable blades high profile PTFE coated pkt of 50 nos.
Optional accessories: Retraction mechanism, calibrated controls for quick orientation of
specimen for re-cut, Standard cassette clamp.

Up to 200 constant tests per hour
1000 patient test data
2000 test procedures can be saved
New concept test systems
Please check the attached product information.

Semi-automatic laminated glass production line, we often call it lamination line, laminated glass line. This line includes different equipment such as washing machine, PVB unwinding machine, laminating positioning and transmission machine, movable scissor sucking hanger, pre-laminating and pressing section and autoclave. There are two kinds of heaters: Ordinary quartz heater and IR heater. The whole line is PLC controlled with high efficiency, safety, reliability, and easy operation.
£¨1£©The whole line is centralized control by PLC .
£¨2£©Washing and drying machine is the core equipment of the whole line.
The upper Rubber rollers, brush rollers and air-knives etc. can be adjusted on the panel and digital displayed according to the thickness of glass to be processed. The upper section of the machines can be elevated by 400mm for convenience of cleaning and repairing. The Brush Rollers are driven by motors with upper and lower separately.
Allocation of one soft brush and two hard brushes (can be lifted when needed) in the upper washing sector is designed for washing hard low-e glass, coated glass without damaging the coating.
Three Stainless steel air-knives, the blower equipped with muffle cotton and air feeding filter screen pack ensures plenty of air, less noise and the good drying effect.
£¨3£©In the laminating room the laminating table, brace of the up-down device, positioning cylinder, PVB film unwinding machine, movable scissor cup suction hunger, convenient for processing of large and big glasses.
Every single processing glass can be conveyed in a higher speed to enter into the Pre-laminating and pressing section and regulated automatically the speed to running at the same speed with the Pre-laminating and pressing section which can make room for the next pieces of glass which improves the running efficiency of the Line.
£¨4£©Pre-laminating and pressing section has reasonable structure.
The integrity is controlled in laminating room with its stable running function.
Speed regulation is frequency variable.
Space/distance between two great squeezing rollers is set by industrial computer assisted by PLC with monitor displayed. The great squeezing rollers are driven by reducer separately.
The heating elements adopt Quartz -Heaters. Temperature is zone control.
£¨5£©Autoclave is a specialized machine for production of laminated, anti-bullet and anti-bombing glass. This machine will melt the PVB film and combined two layers or more than two layers glass by high temperature and high pressure.
Technical parameters
1. Max. Processing glass size:6000mm2500mm
2. Min. Processing glass size:400mm 400mm
3. Processing laminated glass thickness: 6-80mm
4. Total length: 26800mm
5. Power source: AC380V 50 HZ
6. Total power:138.63 KW(without autoclave power)

Boon for mining industries

ôDOM DSRGö (Semi automatic drill steel rod grinder). This machine is a great boon for all mining Industries/Granite quarries.
Regular regrinding of drill steel cut down cost giving increased drilling rates.

ôDOM DSRGö machine is so designed to be handy on the job site makes for economical regrinding. No time wasted in transport of drill steels, thus drill steels are always in Perfect working condition.

"DOM'S" DSRG machine is light in weight, easily carried and simple to set up. A stand accommodated to any surface can quickly be devised from four ordinary drill steel rods. The machine can also be screwed to work bench, on a vehicle or onto a rock wall. In other words it can be mounted right next to the JOB.

"DOM'S" DSRG machine is designed for all integral steels with chisel inserts.
No resetting of the machine is required.
No grinding ERRORS can arise.
No particular skills needed. It also deals with diameter grinding.

"DOM'S" DSRG machine is guaranteed for unmatched performance coupled with incomparable / most competitive price tag.


Lot - 1 unit
Weight - about 60 kgs
Dimensions: 35" x 30" x 25"

Feature:
7 inch Color LCD , Touch screen
Flow cell and Cuvette test mode compatible
Real time curve showing
7 wavelength , 90 test item pre-programmed
Memory for 10,000 sample results
Light source hibernate function making lamp life longer
RS232 interface, PC connecting
Test mode: Kinetic, End point, Two point, Absorbance

Performance characteristic
1.Advanced PLC automatically control system
2.Can make out quadrilateral and polygon
3.Accurate position , automatically baiting.
4.Single button to operate startup and shutdown of machine. Touch sreen and online help. The head of cutter can be adjusted automatically, and it is unnessary to change the head of cutter when the width of spacer bar is more than 6mm.
5.Fuji servo feeding system with digital control system, and Siemens control system.
ModelLZW01
Power supply380V 50Hz 90W
Air pressure0.5-0.8MPa
Bending angle90-120 degree
Aluminum width