Bm3000 Battery Monitoring System

1. Varied battery management styles
2. 24 hours automatically monitoring
3. Wi-fi and hotspot connect method
4. High extensibility of hardware allows user to manage big amount of battery
5. B-TEK special forecast scatter chart
6. E-mail alarm notification
7. Monitoring item includes battery volt., temperature, DCR, micro-discharging volt. and EMF
8. B-TEK unique AI forecast function
9. Support Modbus TCP/IP, RTU and LAN method

UPS system as the important equipment to the stable power supply needs a great amount of battery as a back-up power source. Due to the enormous amount of the batteries, it makes it hard to carry out the manual maintenance. To maintain the discharge ability during the outage, regularly manual detection is needed. However traditional battery discharge test needs battery offline. It's time-consuming and increasing the cost. BMS system can improve the risk of manual measurement, battery deterioration, and power failure, changing battery according to the actual condition of batteries. Besides, the automatic battery equalization function can extend battery life. Not only can it raise the reliability, lower the cost of battery failure, decreasing manual labor also increasing the stuff safety by avoiding direct contact with the electric device.

BMU is installed to the individual battery, collecting the data and send it to the UMW to analyze. BMU is powered by the detected battery, therefore the extra power is not needed, This unit applies to a lead-acid battery, nickel-cadmium battery, lithium battery. BMU analyzes 5 parameters: terminal voltage, temperature, dc resistance, micro-discharging voltage, and electromotive force. Bu analysis, the system finds the deteriorated reasons for the battery and do the predictive maintenance. The groove on the back of BMU allows it to attach on the mounting rail. Dimension is 75*57*31mm. Reverse connection protection function will keep the internal circuit of BMU intact from a reverse connection.

CMU connects to the charger and UMW. The main purpose is to monitor the current of the charger and the total voltage of the battery bank. The groove on the back of the CMU allows it to attach on the mounting rail. Dimension is 75*57*31mm.UMW provides the website browsing function, the user can access the real-time data, historical data, forecast scatter chart, line or curve graph through it. We can utilize a computer, mobile phone or tablet to remotely access the system through ethernet and hotspot function. Besides that, we can also use the FTP and VNC software to remotely access the data or control the system. When the system detects the abnormal parameter, it will automatically send the email notification and inform the users. Another AI function can provide a maximum of three years predicted data of the battery by analyzing the historical data. Efficiently manage the energy system

Website: http://www.b-tek.com.tw/en/web/

The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation

The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density,
long service life, and easiness of installation and expansion.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation

The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density,
long service life, and easiness of installation and expansion.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation

The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability.
Custom capacity is acceptable.
High cycle life
4000 cycles @80% DoD for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high:
up to +60C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
Function
Support parallel operation

Individual block Internal Resistance, Negative Temperature and Voltage monitoring for comprehensive battery state of health analysis.

Charge & discharge current, overall voltage and ambient temperature monitoring.

Auto detects discharges based on discharge current, and stores data for playback.

Performs a scheduled resistance measurement and stores results for trending analysis.

Displays data on local lcd screen.

High/ low alarm levels can be programmed.

Sets off an alarm and the dry contact open when any parameter goes outside the normal range.

Communicates with a external computer via rs485 and lan.

Leds on front panel indicates status of modules.

Software compatible with pc is available.

The small battery pack remote monitoring and alarm system BMS110 is a multifunctional programmable small battery pack data monitoring acquisition and control terminal. Users can directly monitor the single cell voltage, battery pack voltage, current, temperature, and control inversion through APP and Web interface Transformer, etc. Designed for solar power supply system, base station backup power supply, small machine room backup power supply system, electric vehicle charging system monitoring and other scenarios. BMS110 provides 5 channels of 0-60VDC voltage acquisition channels for monitoring solar panel voltage, single cell voltage and total voltage. With 2 analog inputs for collecting current or temperature or diesel generator oil level, etc., supporting 2 digital inputs for tampering, flooding and other alarm monitoring, and a built-in output for automatic control when the battery pack voltage is low Inverter or other equipment.