Lcp Proximal Lateral Tibia Plate (R&l) Hockey

Catheter Kit, Dylasis And All Medical Equipments

Catalog No. : 9SS.335.0R04 To 9SS.335.0L14

Material : Stainless Steel 316L,316 LVM,Titanium

Size
Hole Item Code
(RIGHT)
4mm 9SS.335.0R04
6mm 9SS.335.0R06
8mm 9SS.335.0R08
10mm 9SS.335.0R10
12mm 9SS.335.0R12
14mm 9SS.335.0R14
(LEFT)
4mm 9SS.335.0L04
6mm 9SS.335.0L06
8mm 9SS.335.0L08
10mm 9SS.335.0L10
12mm 9SS.335.0L12
14mm 9SS.335.0L14

Catalog No. : 9SS.333.0R04 To 9SS.333.0L14

Material : Stainless Steel 316L,316LVM,Titanium

Size
Hole Item Code
(RIGHT)
4mm 9SS.333.0R04
6mm 9SS.333.0R06
8mm 9SS.333.0R08
10mm 9SS.333.0R10
12mm 9SS.333.0R12
14mm 9SS.333.0R14
(LEFT)
4mm 9SS.333.0L04
6mm 9SS.333.0L06
8mm 9SS.333.0L08
10mm 9SS.333.0L10
12mm 9SS.333.0L12
14mm 9SS.333.0L14

Tidal Volume 0-2000ml
Venlitation Modes A/C-V with Sigh, A/C-P
Patient Type Adult, Child, Infant (3.5)
Apnea back-up ventilation Manual breath
Inspiration flow Max.90 /min
Flow trigger 2-30 L/min
One Battery run time Minimum 4.5 hours
Product Size 168mm* 156mm * 300mm Weight: 8kg
HS code 9031809090

The Zimmer M/L Taper Hip Prosthesis is a product line from Zimmer Biomet, a company that specializes in orthopedic implants and devices. The M/L Taper Hip Prosthesis is used in hip replacement surgeries and consists of a femoral stem that is implanted into the patient's femur.

The "M/L 12/14 Taper" designation likely refers to the taper of the femoral stem, with 12/14 indicating the taper size. The "Standard Offset" specification suggests a standard offset design for the femoral stem. The offset refers to the distance between the center of the femoral head and the center of the femoral stem. Standard offset is a common configuration, but there are also variations such as high offset or low offset stems to accommodate different patient anatomies.

Key features and considerations for the Zimmer M/L Taper Hip Prosthesis may include:

Material: The femoral stem is typically made of biocompatible materials such as titanium or cobalt-chromium alloy.

Taper Design: The taper design facilitates the connection between the femoral stem and the femoral head component.

Modularity: Some hip prostheses, including those with taper connections, offer modularity, allowing surgeons to choose different head sizes and neck lengths to optimize patient fit.

Surgical Technique: Implantation involves removing the damaged part of the hip joint and replacing it with the prosthetic components.

Range of Motion: The design aims to provide stability, durability, and a suitable range of motion for the patient.

Thumb plate (tubular type) AJY-S03

For the first metacarpophalangeal joint, thumb phalanx, metacarpal fracture and wrist dislocation fixation.

210*145*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Bard biopsy guns, or biopsy devices, are medical instruments used for obtaining tissue samples from the body for diagnostic purposes. These devices are commonly used in various medical specialties, including radiology, oncology, and gastroenterology. The Bard biopsy guns are produced by C. R. Bard, a subsidiary of Becton, Dickinson, and Company (BD), a global medical technology company.

Key features of Bard biopsy guns may include:

Spring-Loaded Mechanism: Many biopsy guns operate using a spring-loaded mechanism that allows for the quick and precise deployment of the biopsy needle to obtain tissue samples.

Single-Use or Disposable Models: Some Bard biopsy guns are designed for single-use or disposable use. This helps reduce the risk of cross-contamination between patients.

Various Needle Sizes: Biopsy guns may come with a variety of needle sizes to accommodate different medical procedures and types of tissue sampling.

Trigger Mechanism: A trigger mechanism is often employed to control the firing of the biopsy needle, allowing for accurate placement and retrieval of tissue samples.

Compatible with Imaging Modalities: Biopsy guns are often used in conjunction with imaging modalities such as ultrasound, CT scans, or fluoroscopy to guide the needle to the target tissue.

Catalog No. : 9SS.334.0R05 To 9SS.334.0L15

Material : Stainless Steel 316L,316 LVM,Titanium

Size
Hole Item Code
(RIGHT)
5mm 9SS.334.0R05
7mm 9SS.334.0R07
9mm 9SS.334.0R09
11mm 9SS.334.0R11
13mm 9SS.334.0R13
15mm 9SS.334.0R15
(LEFT)
5mm 9SS.334.0L05
7mm 9SS.334.0L07
9mm 9SS.334.0L09
11mm 9SS.334.0L11
13mm 9SS.334.0L13
15mm 9SS.334.0L15

Catalog No. : 9SS.383.0R02 To 9SS.383.0L16

Material : Stainless Steel 316L,316 LVM,Titanium

Size
Hole Item Code
(RIGHT)
2mm 9SS.383.0R02
4mm 9SS.383.0R04
6mm 9SS.383.0R06
8mm 9SS.383.0R08
10mm 9SS.383.0R10
12mm 9SS.383.0R12
14mm 9SS.383.0R14
16mm 9SS.383.0R16
(LEFT)
2mm 9SS.383.0L02
4mm 9SS.383.0L04
6mm 9SS.383.0L06
8mm 9SS.383.0L08
10mm 9SS.383.0L10
12mm 9SS.383.0L12
14mm 9SS.383.0L14
16mm 9SS.383.0L16