1,Name: Sodium nitrite Molecular formula: NaNO2 Formula weght:69.00 2Property: (1) ordinary sodium nitrite: white little crystals or light yellow  (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status. Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures. 3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc. Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten. 4 Specification: (Technical Standards:GB2367-2006) Item Unit Molten salt G High G First G Qualified G Dry powder G Assay % 99.3 99.0 98.5 98.0 98.5 Sodium nitrate % 0.6 0.80 1.00 1.90 0.80 Chlorides % 0.03 0.10 0.17 -- 0.1 Water insolubles % 0.02 0.05 0.06 0.10 0.06 Moisture % 1.0 1.4 2.0 2.5 0.2 Loose degree -- -- -- -- 95 5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
Sodium Chloride (NaCl), an ionic compound, is the major reason for salinity of sea water. Evaporation of sea water and mining of salt halite`s are the two major methods used, in the mass production of common salt. Sodium Chloride, as a chemical intermediate, is used in the production of a variety of chemicals. Industries, using this property of Sodium Chloride, are Chlor-alkali industry and Soda ash industry. Apart from the above-mentioned end user applications, it is also used in medicine, pharmaceutical, food and agriculture industries. Further, different grades of sodium chloride are produced to support its vast end users.
Sodium Chloride (NaCl), an ionic compound, is the major reason for salinity of sea water. Evaporation of sea water and mining of salt halite`s are the two major methods used, in the mass production of common salt. Sodium Chloride, as a chemical intermediate, is used in the production of a variety of chemicals. Industries, using this property of Sodium Chloride, are Chlor-alkali industry and Soda ash industry. Apart from the above-mentioned end user applications, it is also used in medicine, pharmaceutical, food and agriculture industries. Further, different grades of sodium chloride are produced to support its vast end users.
Sodium Chloride (NaCl), an ionic compound, is the major reason for salinity of sea water. Evaporation of sea water and mining of salt halite`s are the two major methods used, in the mass production of common salt. Sodium Chloride, as a chemical intermediate, is used in the production of a variety of chemicals. Industries, using this property of Sodium Chloride, are Chlor-alkali industry and Soda ash industry. Apart from the above-mentioned end user applications, it is also used in medicine, pharmaceutical, food and agriculture industries. Further, different grades of sodium chloride are produced to support its vast end users.
Heavy Metal Water Treatment Agent TMT-NA Chemical name: 1.3.5-triazine-2.4.6-trithione trisodium salt, 2.4.6-trithiol sodium thio-1.3.5-triazine, trimercapto-S-triazine trisodium salt Molecular formula: C3N3S3Na3 molecular weight: 243.2 CAS No. 17766-26-6 Technical Indicators Item Indicators Specifications Appearance white crystalline powder content (%) (> 98%) insoluble matter in water, (< 0.01) heating reduction heat Loss,%, (< 0.50 ash,(%) 0.50 ash, (%) 0.50) Use: This product is a heavy metal removal agent, developed to protect the good environment and avoid heavy metal pollution in wastewater, even if the amount is small, it also shows a very high removal efficiency of heavy metals. Other existing heavy metal eliminators also tend to react selectively with some heavy metals, and have odor and toxicity. This product obviously overcomes these problems. Na3T is a triazine component that can precipitate almost all monovalent and divalent metals, such as copper, cadmium, mercury, silver, lead and tin. Similarly, heavy metals converted into complexes can be removed, especially for precipitation of mercury, copper, cadmium, silver, lead, nickel and tin. The significance of this product lies in a series of advantages, such as non-toxicity, odorless, convenient use, no secondary pollution, etc. Especially for heavy metal ions which can not be treated by traditional alkali neutralization method, it has a good removal effect, so it has been widely used in wastewater treatment industry containing heavy metal ions, especially in power plants with desulfurization wastewater treatment system. Use method: TMT-NA water treatment agent is a high-tech water treatment agent. The product TMT-NA dilutes with water at 1:10-20 to form a stable liquid. It can react rapidly with various heavy metal ions (mercury, lead, copper, cadmium, nickel, manganese, zinc, chromium, etc.) in wastewater at room temperature to form water-insoluble chelates with good chemical stability, so as to achieve capture and removal. The purpose of heavy metals is to be an ideal substitute for importing similar products. Even for the coexistence of heavy metals and complex salts (such as EDTA, NH3, citric acid, etc.) in wastewater, they can play a full role, and have the characteristics of coagulation, rapid precipitation, fast dewatering, easy post-treatment, less sludge and stable non-toxic, no discoloration of water body after dosing, no secondary pollution, etc. Application fields of TMT-NA: electroplating plant wastewater, petrochemical refinery wastewater, printed circuit board factory wastewater, optical instrument factory wastewater, coal-fired power plant (wet hair desulfurization) wastewater, battery factory wastewater, mining and processing wastewater, metal products factory wastewater, non-ferrous metal refinery wastewater, non-ferrous metal processing plant wastewater, electronic parts factory wastewater.
Technical Indicators 1 Industrial grade Indicator NameIndicator Value Powdered Products F Needle Products Z Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder without caking White or yellowish needlelike without lumps Active matter 920 930 950 920 950 Free oil 12 12 12 20 15 Inorganic salt Sodium sulfate 58 48 25 48 25 Sodium chloride 015 015 015 015 015 Moisture 20 20 20 40 30 PH value 1 aqueous solution 7595 7510 Whiteness WB 90 2 Toothpaste grade Indicator NameIndicator Value Toothpaste Grade Y I Level II Level III Level Appearance White or yellowish powdery or needlelike without caking Active matter 950 930 930 Free oil 12 12 12 Inorganic salt Sodium sulfate 25 32 40 Sodium chloride 015 015 015 Moisture 20 20 30 PH value 1 aqueous solution 893 893 810 Whiteness WB 90 Foaming capacitymm 180 Heavy metal as Pb mgKg 15 Arsenic content as As mgKg 3 Total bacterial count CFUG 100 Total number of molds and yeasts CFUG 100 Fecal coliformsG Not to be detected Pseudomonas aeruginosaG Not to be detected Staphylococcus aureusG Not to be detected 3 Latex grade Indicator NameIndicator Value Latex grade powder needle liquid Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needlelike without caking Light yellow transparent liquid Active matter 940 92 285305 Free oil 0810 1520 15 Inorganic salt Sodium sulfate 30 30 15 Sodium chloride 015 015 005 Moisture 35 35 PH value 1 aqueous solution 810 7595 Whiteness WB 90 Color Klett 30 active 60 4 Reagent grade Indicator NameIndicator Value Reagent grade Level 99 Level 97 Appearance White flaky crystals White powder Solubility 1 alcohol Completely dissolved Solubility 10 aqueous solution Completely dissolved Chroma APHA 20 deionized water 15 Active matter 99 on dry basis 97 Petroleum ether soluble matter 02 10 Sodium sulfate 05 15 Sodium chloride Moisture 10 20 PH value 1 aqueous solution 6080 6011 Phosphate 1ppm Lead Pb 2ppm Iron Fe 1ppm Nitrogen 5ppm Arsenic As 01ppm Fraction content 990 Absorbance 3 deionized water 230nm 04 260nm 01 280nm 01 410nm 001
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Supplier: Technical salts
Buyer: Technical salts
