Ready-Mixed Heatproof Mortar

We supply the Required Grade and Type of Cement that have been procured from the Top Brands made available to the customers at the required Specification for the best prices in the Bulk quantities required.
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market.

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years.

APPLICATIONS

Soil stabilization
Mortar
Used in combination with Portland cement
Pre-cast concrete
Ready mix concrete
Specialist projects

Our air-set refractory mortar is ready-to-use for lining refractory bricks and insulation bricks. It contains refractory materials and binders to provide an excellent adhesiveness after drying in the room temperature, and excellent Bonding strength after 1200~1500 sintering.

It is highly suitable for bonding of insulation bricks and refractory bricks. It is used to seal and repair furnaces, combustion chambers, boilers, stoves, flues, stoves, ducts, chimneys, and many other furnaces and refractory applications.
Ready to use
Easy application
Refractory wet mortar
High Temperature Refractoriness

Ready-Mixed Mortar for Various Construction Purposes

Our Ready-Mixed Mortar Factory can supply large quantities of ready-mixed mortars for different construction purposes. They are:

Masonry mortar
Plastering mortar
Special thin layer masonry mortar
Special thin layer plastering mortar
Flooring mortar
Polymer crack-resistant waterproof mortar
Thermal insulation mortar
Soundproof mortar
Door and window joint filling mortar
ALC panel bonding mortar
Ceramic tile adhesive

If you have interest in any of the above ready-mixed mortars, please feel free to contact us with your specific requirements including packing and possible order quantity, etc., and we will provide all the necessary details.

Advantages of ready-mixed mortar:

Ready mixed mortars offer top quality construction with low cost.

Ready-mixed mortars solve the problem that the proportion of mortar prepared by traditional mixing is difficult to control and thus influences the construction quality. The measurement of ready-mixed mortar is very accurate and the quality is reliable. Because mortar with different purposes has different requirements for shrinkage, crack, heat preservation and moisture, etc., and the workability, water retention and setting time of construction requirements are also different, these specific requirements need to be formulated strictly according to scientific formulas, and only the production process of ready-mixed mortar can meet these requirements.
Because of the accurate measurement and quality assurance, the engineering quality after using ready-mixed mortar is obviously improved, the construction period is obviously shortened, and the amount of labor, reduced.

Ready-mixed mortar is a factory-ready-mixed material, which can be used only by adding water and stirring it evenly at the construction site, with little dust escape and more environmental protection. Excellent construction quality will greatly increase the confidence of contractors and owners. The leakage of waterproof mortar layer traditionally mixed on site is also a prominent problem that puzzles owners, but many special waterproof materials in ready-mixed mortar will fundamentally solve such problems.

High Standard Ready Mixed Dry Mortar Plastering Mortar
Main Features:
- Good adhesive strength with substrate and thermal insulation layer
- Good workability, stable strength, easy to control
- Low dry shrinkage rate ensure maximum dimensional stability of the wall
- Effectively eliminate seepage, leakage, crack, improve the wall anti-crack,anti-seepage and anti-strain capacity
Origin: Vietnam
Brand Name: AAP Mortar
Packing: Bag 50kg / Jumbo Bag.

The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market. * Portland Cement is the most common type of cement used for concrete, and stucco. Types Of Cement We offer include: Ordinary Portland Cement Portland Pozzalana Cement White Cement Portland.
Origin :- Vietnam . Turkey

Payment Terms :- LC/SBLC

Thermotax is a ready to use air setting refractory mortar. It is air setting mortar having good strength on air drying, forming strong joints & conferring an almost monolithic structure to the fire brick work. Moreover, it is highly suitable for Insulation brick lining work as well as refractory Brick lining work.