Thermite Welding flux provide exothermic joint for the rods or conductors.
Steel disk & Stater powder are included with each Fluc packet.
Weight of Welding flux might differ with requirement and same with the rates
Manufacture and Supply of Alumino Thermit Welding Kits for 52kg, 60kg, 60E1, R260, 1080HH, Combination Joint 60Kg/60E1 to R260, 115RE, 54kg, 45kg, 45E1, P43, P65, BS80, BS100, 37kg, CR100, CR120, other Crane rail & Metro rail and many more for private sidings as well as we have capability to develop Kits for other rails, includes
Alumino Thermic welding Portion
3-Piece Dry Mould
Single Shot Crucible with auto tapping thimble or Multishot crucible
Luting sand / luting paste
Igniter
Also, manufacturer and supply :
Welding Equipments and consumables
Small track machines (Engine, Battery, Electric, manual)
Ultrasonic Flaw Detection (USFD) machines
Rail Cutting disc and grinding wheels
Nova supply and distribute welding flux commonly used for steel structure construction, shipyard, offshore facilities, bridge construction, and automobile manufacturing.
Rail Thermit Welding
Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
Rail Thermit Welding
Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
1. Specification conformance
Aws a5.20 e71t-1 gb/t10045-2001 e501t-1 / jis z3313 / yfw c50dr
2.Description
Aws a5.20e71t-1 is a kind of ti type flux cored wire for co2 welding , it has high cladding efficiency, good welding technical performance in all-position welding, apply for low carbon steel and 500mpa grade strength steel welding, such as ships, pressure vessels, mechanical equipments and bridges.
3. Chemical composition of deposited metal (%)
C161;¨¹0.18, mn161;¨¹1.75, si161;¨¹0.90, p161;¨¹0.03, s161;¨¹0.03, cr161;¨¹0.20, ni161;¨¹0.50, mo161;¨¹0.30, v161;¨¹0.08, cu161;¨¹0.35
4.Mechanical properties of deposited metal
Yield point480 mpa, tensilestrength400 mpa,
Elongation22%, test temp -20161;227;c, impact energy 27 j
5. Available diameter
0.8mm/0.9mm/1.0mm/1.2mm/1.4mm/1.6mm
Detailed product description of flux cored welding wire:
Features: flux cored welding wire is available for both mild steel and stainless steel gas metal arc welding. A flux cored welding wire is a tubular wire with a metallic powder flux inside. The primary advantage to flux cored welding wire over gmaw or stick welding is higher deposition rates, deeper penetration, improved bead appearance and is more cost effective
Packing: 15kg/vacuum aluminum foil bag
Certificates: abs ccs dnv lr gl kr nk, iso9001:2000, and so on;
Specification: 1.0mm, 1.2mm, 1.6mm.
Packing:5kg, 10kg, 15kg or 20kg packed in plastic spool;5kg, 15kg in iron wire spool; 250kg and 350kg in drum.
Packing: black good plastic spool, precisely winding, with water-proof paper, wrapped by plastic film and silica gel, and then a white neutral carton box, at last by pallet;
The flux-cored welding wire is intended to inert-gas shielded fusion welding of titanium and its alloys and includes a metal coating or tubular casting of titanium or its alloys and a powder flux core containing (per cent by weight):
Baf2 -- 5 to 10,
Fluoride of a rare-earth element -- 18 to 20,
Caf2 -- 40 to 50,
Srf2 -- the rest,
The ratio of the weight content of the powder flux to the total weight content of titanium in the wire being from 0.3: 1 to 1: 1.
