Paper Slitting Machine

This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system. 2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC 
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake

Roll To Roll Thermal Paper Slitting Machine

Product Description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system.2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC 
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake

Product technical parameters

External size W*H 2500*2000*1850mm
Maximum base paper diameter 1100mm
Area covered 3000*3000mm
Inner diameter of base Paper cylinder 3 inch
Total weight 3T
Number of layers of wrapped paper Single layer
Input power supply 380V/50HZ(60HZ)
Unwinding tension Auto-tension control
Power 7KW
Winding diameter 3O-85mm
Gas source Compressed air greater than 10KG
Core diameter 15-26mm
Matching air compressor >10P
Counting method Metric number and diameter
Control mode PLC+touch screen
Maximum slitting speed 200m/min
Slitting material 50g-80g web
Max slitting base paper width

Category
Converting Equipment
Manufacturer
Gutenberg
MODEL
MB-1400 SL
SIZE
2400x1800 mm

DESCRIPTION:
The slitting machine can cut the paper roll into the specified size paper roll.

Technical Data
Max. Paper Cutting Width: 1400 mm
Max. Paper Roll Diameter : 1500 mm
Max. Rewinding Roller Diameter: 400 mm
Machine Max. Speed: 450 m/min
Max. Slitting Speed: 400 m/min
Tolerance Slitting Width: =±0.15 mm
Min. Slitting Width: 30 mm
Power Supply: AC 380V, 50HZ, 3 phases, 4 wires
Rated Power: 33 kw
Machine Dimension: L 3800 x W 2400 x H 1800 mm
Machine Weight: About 5000 kg

Parameters
Power: 3 Phases, 380V ±10%, 50 Hz
Compressed Air: Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3
Installation Height: Max. altitude: 1500 m
Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C

Product Description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system.2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC 
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake
Main Specification
Model SANFQ-1600A
Jumbo roll max.width 1600mm
Jumbo roll max.diameter 1500mm
Finished roll min.width 50 mm
Finished roll max.diameter 1000mm
Slitting tolerance ±0.2mm
Paper range 50~550gsm
Speed 50-350m/min
Blade 7 pairs
Power 26KW/380V/50HZ/3 phases
Weight ~6000kgs
Dimension 5500mm*3500mm*2200mm

Specification:
 
Max. Rewinding O.D : 600mm
Rewinding Core I.D : 1''-3"
Machine Width : 1M-1.8M
Max. Unwind O.D : 1200mm(800mm)
Min. slitting width: 100mm
Machine Speed : 300M / Min
 
Application:
Suitable for rewinding various of paper, film.

Feature:
ï?·Main motor:1 (or 2) A.C. motors, which works with tension controller to provide the stable tension on finished rolls.
ï?·Electricity Device:
     Control panel with touch screen for setting tension, length, etc... 
     PLC programming system to control the mechanical movements.
     Self detection system can automatically find out the cause of machine problem.
    Jumbo roll lifting up device: assisting in lifting the jumbo to save time  
    and alleviate labor strength.
ï?·Unwind base:connected unwind base for convenient operation.

Optional Parts:
ï?·Noise reduction hood: reducing noise to improve working environment. 
ï?·Trim removing unit: independent tranverse trim winding unit or strong blower for non-adhesive material.
ï?·Shear knife: It can be mounted for big-width slitting.
ï?·LPC Device: Automatically line positioning control system can be used for the printed material.

Technological Parameters:
Item Parameters
Model RYSD-1500 RYSD-1800
Max. width 2600mm 3000mm
Min. Diameter 400mm 600mm
Max. Diameter 1550mm 1800mm
Time consuming It'll take 3-6min to cut one roll paper, time consuming conversely to weight. 6 volumes can be cut per hour in average.
Voltage 380V/50HZ (can be design according to customer)
Total Power 40KW 47kw
Weight 4.5T 4.8T
Dimension 4500*3000*2500mm 7000*3500*2800mm
How to Place Plat on level ground, willfully adjust allowed
Blade life time The blade should be sharpened by special tool after 700 times cutting. The blade should be return to factory to be replaced after 6 times polished. We provide the reference price of the blade and the contact of the blade vendor.
Practicality The machine is made with iron accord with GB. It is durable and will not be deformed. Full welding and secure. It manufactured with the famous brand electronic components which is durable and have stable performance.

Main Spare Parts (RYSD-1500)
1. Control System
The machine use high performance variable frequency driving system, High quality, easy operation and stable
Item Qty. Origin Note
High-performance overloading inverter 4unit China 30KW 1unit 1.5KW 3unit
Electric frequency control system
1set High stability
2. Size positioning system
Inverter motor for measure size 1unit Taiwan 1.1KW
Paper stand 2set China Factory made
3.Mechanical system
Reduce gearbox driver 1set China High speed, high quality
Reduce gearbox bearing 4set Japan NSK Tip Bearing
High temperature seal ring 2unit Japan NOK
Japan NSK P bearing 4set LK
Machine transmission shaft and mechanical parts are adopt digital controlled lathe processing, good quality and high precision.
4.Cutting system
Shaft roller for Paper 1set China Length:2.8m, Dia.:194mm, thick: 25mm high quality material good running
Main inverter motor 1unit 30K imported Quality same as ABB motor
Paper Stand Inverter motor 1unit 1.5KW Taiwan
Alloy Blade1850*12mm 1psc Saw body: 80 chromium Germany Saw head made in Taiwan Blade modulation, dynamic balance, heat treatment process. Good stability and durability deformation swing, safety performance
5. Inner vacuum negative pressure fan 2unit High stability Reduce 80% dust
6. Dust hood 1unit China Factory made

Model WZFQ 1600A
Precision ±0.2mm
Max. width of unwinding : 1600mm
Max. diameter of unwinding :  1600mm (Inner core 3 6)
Min. width of slitting : 50mm
Max. diameter of rewinding 1000mm/ 1200mm(option)
Speed 350m/min
Total power 20-35kw
Suitable power supply 380v/50hz
Weight (approx.) 3000kg
Overall dimension
(L W H )(mm) 3800 2400 2200