Frp Filter Tank

Conventional tanks (concrete or mild steel) are prone to aging, wear and corrosion.
Concrete can crack when exposed to erosion and natural disasters, leading to water
contamination and leakage â?? and usually canâ??t be repaired. MS rusts easily and its also
easy heat conductor.
FRP â?? Fiber Reinforced Polymer is a strong but light weight glass fiber reinforced plastic
composite used in the aerospace, automotive, marine and construction industries. It has
a high-strength to weight ratio, an extremely long lifespan, and easy to maintain as well as
heat resistant.
FRP sectional panel tanks provides all types of advantages which other liquid storage
methods doesnâ??t. These tanks are DURABLE, LEAK-FREE, COST-EFFECTIVE OVER LIFECYCLE as well as EASY TO INSTALL, RECONFIGURE AND RELOCATE. This is an ideal option
for a wide range of usage including potable water storage, food and factory production,
commercial mining, fire protection, industrial liquids, rainwater harvesting, seawater
storage, and any other kind of liquid and granular storages.

Material: FRP
Application: water filtering and water softening
Origin: China

0.6MPA FRP TANKS (30 to 63 INCH) FOR INDUSTRIAL USE
FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series

FOR INDUSTRIAL: 30" to 63"
FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series

FOR INDUSTRIAL: 30" to 63"

HEBEI CHENGDA HUAMO(HBCDHM in short) manufactures FRP tanks with design pressure 1.0Mpa(150Psi), 0.6Mpa(approx 100Psi) to meet various needs of the users.

Structure and Materials of FRP Tanks

Liner material: Rotation molding or Blowing One-piece seamless PE liner

Outer Winding: High performance Epoxy resin + Fiberglass three-dimensional winding reinforcement.

Opening: 2.5" and 4" reinforced plastic thread; 6" alloy flange.

Base Materials: FRP or reinforced PP

ASME Certification frp tanks Application Conditions

Working Pressure: 150 psi(10.5 bar) for Winder series

0.6Mpa for Rohone and Aowy economy series.

Working Temperature: 1 C - 49 C (34F - 120F)

Max. Vacuum: 127mmHg
Lowest Environment Temperature:-27 C (-17F)

Strict Quality Control(Q/A)

Fatigue test: 250, 000 times. (standard 100, 000 times)

Burst test: 4 times of its design pressure.

Certification: NSF & ACS, ASME

Model: 0517-8079.

Rohone and Aowy FRP tank also is Chengda brand: 100 Psi. (Chengda is the FRP RO membrane housing and FRP tanks production base for Frotec - the largest water treatment trading company in China. AOWY brand only for Frotec.)

Specification of frp tanks
No. Model Nominal dimension Opening Volume Base Dimension
Top Bottom litre Gallon A (mm) B (mm) C (mm) D (mm)
1 06Ã??17 150*450 2.5"-8NPSM / 6.7 1.8 Standard 437 161 / 55
2 0635 150*890 2.5"-8NPSM / 15 4.0 Standard 896 61 / 155
3 0713 180*330 2.5"-8NPSM / 6.3 1.7 Standard 335 188 / 180
4 0717 180*432 2.5"-8NPSM / 8.6 2.3 Standard 437 188 / 180
8 0735 180*890 2.5"-8NPSM / 20.1 5.3 Standard 895 �¦188 / 180
9 07Ã??44 180*1110 2.5"-8NPSM / 24.5 6.5 Standard 1125 188 / 180
10 0813 200*330 2.5"-8NPSM / 8.5 2.2 Standard 335 216 / 207

FEATURE

Chengda Winder, Rohone, and Aowy FRP softner tanks quality assurance: burst test with 4 times of its design pressure, and 250000 times cycle test.

1.HBCDHM FRP tanks (844-1665) use 600 TEX fiberglass, not 1200TEX fiberglass, with higher safety factor.

2.The base of HBCDHM FRP tank is made from pure raw material not recycled material, With better appearance, stronger toughness, and more environmentally friendly.

3.Key additives are imported from the US.

APPLICATION

HBCDHM FRP tanks are widely l used for water softening equipment in food processing plants, hospitals, laundries, manufacturing plants, office campuses and restaurants, condominiums, boiler feedwater, car washes, institutions, municipal, multimedia filters, carbon filters, iron filters, calcite filters and specialty media filters

FRP (Fibreglass Reinforced Plastics, also known as Glass Reinforced Plastics) is a modern composite material of construction for chemical plant equipment like tanks and vessels. Chemical equipment that range in size from less than a metre to 20 metres are fabricated using FRP as material of construction.

BLOWTECH FRP storage tank made of FRP has an inlet an outlet, a vent, an access port, a drain and an overflow nozzle. However, there are other features that can be included in the tank. Ladders on the outside allow for easy access to the roof for loading.

Our FRP Tank Designed are widely used in the chemical industry in the following sectors:

Chemical Plants (agro chemicals, chemicals for pharma industries, organic / inorganic chemicals, Dyes, Intermediates, Speciality Chemicals etc.), Chlor-Alkali Manufacturers, Fertilizer, Wood Pulp and Paper, metal extraction, refining, electroplating, brine, vinegar, food processing, and in air pollution control equipment, especially at municipal waste water treatment plants and water treatment plants.

*BLOWTECH FRP Storage Tanks Advantage:

- Good Chemical and Weather Resistance
- Light Weight & Reasonable Price
- Good Insulating Qualities Resistant to corrosion
- Easy Maintenance & High Temperature
- Provides Less Down Time
- Easy to Handle & Sturdy in Construction
- Offers Easy Installation

Diameter 1m-4m
Capacity 1m3- 200m3
Customized diameter: 4m-4.5m
Customized capacities: 250m3-300m3
Diameter Requested can be 400, 500, 600, 700, 800 mm.

We can fabricate all kinds of large scale FRP vessels under the inquiry of clients.

FRP tank product according customer's requirement

Pengyu FRP tanks are made of high performance composite materials-HDPE or LLDPE liner with filament winding outer shell.

Pengyus design provides a continuous seamless inner liner shell with a GF PP inlet for higher strength, temperature and pressure capabilities.
Pengyu is senior expert in the field of water treatment. We can? design and make all kinds of FRP tanks and mixed-bed and so on.
All FRP tanks are NSF,PED(CE) certified.
Different colours are available. Especially for our apricot colour liner, can separate sunlight completely for avoid alga or microbe existing.

Operating Condition:
Max. Operating pressure 150psi(10.5bars)
Max. Operating temperature 120 F(49 )
150 F(65 )for flange opening tank
Cycle Test:250,000 cycles without leakage