Zuri T (2X2)

Zuri - B (2X2) is a bottom open 2 feet by 2 feet luminaire used for clean room lighting application. The fixture is recessed into the ceiling. The body is made of CRCA material with white powder coating. The top is usually stainless steel finish. PMMA difuser is used for spotless and glare free light distribution.

Electrical
Input Voltage : 180 - 280 AC 50Hz

Driver Type : Constant Current Driver

Control : Switch / DALI / Analog

Connection : Plug-in Type Pre-wired

General Characteristics
Appliance Class : Class 2

Ingress Protection : IP40

Photobiological Safety : RG 0 - No Risk

Ambient Temperature : 0 to +50 C

Luminaire : Housing Material

CRCA - Powder Coated : Environment

Indoor : Mounting

Recessed : Light Distribution

Direct : Body Finish

Stainless Steel top : Optics

Diffused : Driver Mount

Integrated : Thermal Management

Passive Cooling : Light Source

LED : Medium Power LED / LED Bulb

Binning : 3 Step MacAdam

Luminous Efficacy : 95 Lm/W

Color Temperature : 2700K / 3000K / 4000K / 5700K / 6500K

CRI : 80 (Standard) 90 (Optional) Tunable LED (Optional)

UGR : < 19

LED Life : > 50,000 hours

Size And Wattage - 610X610-30W-40W

Feature:

MADE OF HIGH QUALITY MATERIALS: a rigid frame will not allow the panel to bend over time, the lens is made of Special PMMA (transparent glass substitute) and will not yellow over time. Even in five years the fixture will look exactly the same as the day it was installed. This Edge lit panel measures only 1/2â?? thick making it one of the slimmest panels in the marketplace today. ETL LISTED AND DLC CERTIFIED. DLC certification makes the product eligible for energy saving rebates
WIDE APPLICATION: LED troffer panel lights can be used in just about any indoor space. Use them in schools, offices, retail spaces, hospitals, and many other places. They are aesthetically pleasing while still providing ample amounts of lighting. These LED troffers come in 1X4 2X2 and 2X4 sizes perfect for any space
EASY TO INSTALL; RECESSED AND SURFACE MOUNTED OPTIONS ARE AVAILABLE: Standard application is T-Grid, all accessories are included. Two alternative mounting options are available: surface and sheetrock flush mount. PLEASE NOTE: accessories for all mounting options excluding T-Grid recessed mounting should be bought separately
DIMMABLE LED PANEL LIGHTS: These LED panels are dimmable. They have the standard 0â??10V dimming capabilities. High quality driver provides smooth 5-100% dimming (opposed to step dimming suggested for lower quality drivers that allows only a few dimming options (e.g. 25%-50%-75%-100%). Please note: dimming is optional, if this feature is not required the dimming wires can simply be capped off and the light will function on/off
WARRANTY AND TECHNICAL SPECIFICATIONS: 81,000 hour LED lifetime, 5-year manufacturerâ??s warranty, 3000K / 4000K / 5000K color temperature , 4677 lm luminous output (the amount of light produced), 40W (efficiency), 100-277V operational voltage range. Additional technical specs can be found in the table below

ETL DLC 2*2 Ft Backlit LED panel light

SAVE ENERGY
DIMMABLE
EASY INSTALLATION
CERTIFICATION & WARRANTY
WIDE APPLICATION


MODEL NUMBER BL-BTB-50A 2*2
Rated Power 40W
Replacement Power 120W
Lamp Dimension 603*603*30m (2*2' Feet)
Hole cutting 595*595mm
Input Voltage 100-277V
Frequency 50/60Hz
Normal current 300-350mA
LED Driver case Auminum Junction box for North American market
Starting time 0.9
Energy consumption 40 Kwh/1000h
Dimming Type 0-10V Dimming
Color temperature 3000K, 4000K, 5000K / 3CCT
Lumen >120LM/W
Beam angle 120
Color rendering index >80 Ra
Color Consistency < 5 SDCM
Suitable for accent lighting Yes
Lifespan >50,000 h
Swich cycles 20000
Energy efficiency class A+
IP Rate IP30
LED-Type 2835SMD
Material Aluminum
Lamp housing Color White
Warranty 5-6 years
temperature range -15 ~ +50
Certificates ETL / DLC

MADE OF HIGH QUALITY MATERIALS: a rigid frame will not allow the panel to bend over time, the lens is made of Special PMMA (transparent glass substitute) and will not yellow over time. Even in five years the fixture will look exactly the same as the day it was installed. This Edge lit panel measures only 1/2 thick making it one of the slimmest panels in the marketplace today. ETL LISTED AND DLC CERTIFIED. DLC certification makes the product eligible for energy saving rebates
WIDE APPLICATION: LED troffer panel lights can be used in just about any indoor space. Use them in schools, offices, retail spaces, hospitals, and many other places. They are aesthetically pleasing while still providing ample amounts of lighting. These LED troffers come in 1X4 2X2 and 2X4 sizes perfect for any space
EASY TO INSTALL; RECESSED AND SURFACE MOUNTED OPTIONS ARE AVAILABLE: Standard application is T-Grid, all accessories are included. Two alternative mounting options are available: surface and sheetrock flush mount. PLEASE NOTE: accessories for all mounting options excluding T-Grid recessed mounting should be bought separately
DIMMABLE LED PANEL LIGHTS: These LED panels are dimmable. They have the standard 0-10V dimming capabilities. High quality driver provides smooth 5-100% dimming (opposed to step dimming suggested for lower quality drivers that allows only a few dimming options (e.g. 25%-50%-75%-100%). Please note: dimming is optional, if this feature is not required the dimming wires can simply be capped off and the light will function on/off
WARRANTY AND TECHNICAL SPECIFICATIONS: 81,000 hour LED lifetime, 5-year manufacturers warranty, 3000K / 4000K / 5000K color temperature , 4677 lm luminous output (the amount of light produced), 40W (efficiency), 100-277V operational voltage range. Additional technical specs can be found in the table below