Grease And Glue Dispenser Valve

Dosing Valve:

Working pressure:Max.180kg/square cm

Suitable for:NLGI 00#-3# grease or similar medium.

Air pressure:4-6kg/square cm

Accuracy: 1%

Dosing scope:0.1-5cc or according to customer requirement.

Working temperature:-30 to +80

With anti-drip function



Outline
(1)Quantitative precision fluid metering valve,
quantitative spit valves, Its Volumetric quantification
principle quantitative valves.
(2)Quantitatively accurate, adjust the
amount of convenient, simple control
(3)Widely used in electronics, machinery,
pharmaceuticals, automotive,
Ship, food, cosmetics and other industries.

Feature
(1)For a variety of medium, high and ultra-high
viscosity media quantitative filling
(2)For a variety of piston pumps, screw pumps,
gear pumps and other feeding system
(3)Unaffected by pressure fluctuations filling quantity
(4)Two five-way valve to control their work to do

1 The product overview
Back to the suction valve is composed of a cylinder body, a valve body and a material body and other components, use the plunger principle, with suction function, the settlement of the high viscosity medium continually glue, drawing etc.

2 Products application
Applicable to all industries products needed for lubrication, bonding, potting, sealing, perfusion, low viscosity dielectric filler.
Such as: Plastic products bonded quantitative dispensing
Waterproof sealing adhesive products
Electronic parts are fixed and dust-proof protection glue
Speaker, speaker, buzzer, audio, such as dispensing

3 Characteristics
1) With suction function, solve medium drawing;
2) The fluid contact part is made of corrosion resistant sealing ring;
3) Small volume, light weight, long service life, less maintenance repair;
4) Easy disassembly, easy cleaning, easy repair;
5) A discharge port can be connected with any dispensing needle;

4 Technical parameters
Type: Single / double action thimble
The use of air source: 4-7Kgf/cm
Gas cylinder: Single or double action cylinder ( optional)
Output: 0.01ml
Operating viscosity: 1-1.000.000cps
Body material: Aluminum alloy or stainless steel ( optional)
Feed pressure: 1Mpa ( 1Mpa 10kg/f )
Feed port: G1/8 "
Operating speed:

1-5g Dosing Valve.(optional model:0.01-0.1cc;0.1-1cc;1-10cc;1-30cc;10-150cc).

Working pressure:Max.180kg/square cm

Suitable for:NLGI 00#-3# grease or similar medium.

Air pressure:4-6kg/square cm

Accuracy: 1%

Dosing scope:1-5cc

Working temperature:-30 to +80

With anti-drip function



Outline
(1)Quantitative precision fluid metering valve,
quantitative spit valves, Its Volumetric quantification
principle quantitative valves.
(2)Quantitatively accurate, adjust the
amount of convenient, simple control
(3)Widely used in electronics, machinery,
pharmaceuticals, automotive,
Ship, food, cosmetics and other industries.

Feature
(1)For a variety of medium, high and ultra-high
viscosity media quantitative filling
(2)For a variety of piston pumps, screw pumps,
gear pumps and other feeding system
(3)Unaffected by pressure fluctuations filling quantity
(4)Two five-way valve to control their work to do

Grease valve.
- Control the track tensions of any crawler type excavators.
- Can be used in a variable industrial processes

We are the leading manufacturer and supplier of high quality Grease Valve in Korea servicing clients for more than a decade. As one of the most recommended and trusted company in the world, we offer top of the line products which are highly durable and efficient. Our mission is to set high standards in the industry through continuous R&D and process improvement. Our grease valve can be used for piping systems that transfer grease without any mess. Our products are built for heavy-duty industrial applications and can easily suit all your requirements. The advantage of grease valve is that it¡¯s a flow limiting valve and made-up to maintain a specific flow rate, remaining steady all the way through changing pressure influences. Our grease valve can withstand a pressure of MAX 850 kgf/cm2 thus offering high efficiency.

Track adjuster grease check valves applied for Hitachi.

Nano Technology Metal conditioner NASA approved.
Not an oil
Not an Additive
100% Synthetic
100% Eco friendly
500+ Worldwide known brands already in use

e product overview
The plunger pump high pressure grease ( 200Kfg~350Kfg ) reduced to quantitative valve or workpiece rated pressure range ( 10~200Kgf ). And with the elimination of
Plunger pump produced by the pulsation function.
Grease pump belongs to the plunger structure, pipeline pulsation obviously; And plunger pump for high pressure oil output ( up to hundreds of kilograms of pressure ), while the number of industrial equipment or quantitative valve can not afford such a high pressure, grease relief valve can be high pressure regulating and limiting in the pressure range, thereby protecting equipment or quantitative valve, prolong its service life.

[ ] Products application
Used in high pressure medium input device before the pipeline
Input pressure: 40Mpa
Output pressure: 20Mpa
Oil inlet and outlet: G1/4 "
Material: Carbon steel 7075

1-5g Dosing Valve
Working pressure: Max. 180kg/square cm
Suitable for: NLGI 00#-3# grease or similar medium.
Air pressure: 4-6kg/square cm
Accuracy: �± 1%
Dosing scope: 1-5CC (option model:0.01-0.1cc;0.1-1cc;1-10cc;1-30cc;10-150cc/cycle)
Working temperature: -30 to +80
With anti-drip function

Outline
(1)Quantitative precision fluid metering valve,
Quantitative spit valves, Its Volumetric quantification
Principle quantitative valves.
(2)Quantitatively accurate, adjust the
Amount of convenient, simple control
(3)Widely used in electronics, machinery,
Pharmaceuticals, automotive,
Ship, food, cosmetics and other industries.

Feature
(1)For a variety of medium, high and ultra-high
Viscosity media quantitative filling
(2)For a variety of piston pumps, screw pumps,
Gear pumps and other feeding system
(3)Unaffected by pressure fluctuations filling quantity
(4)Two five-way valve to control their work to do

TH-206H-KG3
Gantry Benchtop robot with rotary Dispensing valve
Patent Number ZL 2010 2 0120765.6

FEATURES
1.Feed system is 310ml cartridge silicone, Good for storage material by 310ml,400ml,500ml,600ml cartridge hard packing.
2.Rotary dispensing valve Suitable for high viscosity fluids,Constant uniform bead dispensing
3.High precision liquid controller system.

Applicationï¼?
Good for storage material by 310ml cartridge hard packing. Precision dispensing silicone on the product.
Liquid Material: adhesive, glue, silicone, RTV, sealant,paste adhesive.
Packing capacity:310ml,400ml,500ml,600ml cartridge hard packing


Specification
ITEMTH-206H
X/Y/Zworking range300 x 300 x 100mm
Dimensions (WxDxH) mm600 x 520 x 610
Weight34kg
StandardCE Approved
XY/ZMaximum Load10 kg / 3 kg
Repeatability0.02mm
Resolution0.001mm
XY/Z Speed800/350 mm/Axis
Data memory capacity9999programs
Display wayLCD display
Drive SystemPrecision micro-stepper motor
TransmissionTiming Belt/ Precision Linear Guides
Edit Programming Handheld Programmer
I/O Signals4 Inputs / 4 Outputs
Port allows for dataUSB port allows for data transfer between PC
Patterns3DLines, Circles, Arcs, Continuous Paths, XYZ
simultaneous (CP) 3D
Power SupplyAC110V/220V Internal conversion
Working Temperature0 ï½?40
Relative Humidity20ï½?90% (no condensation)

Help you more:

· Increase production efficiency
· Promotion processing precision control
· Improve product quality
· lower production costs, reduce rejected product
· Eliminate material waste
· Create more economic benefits for the enterprise.