1. Product Functions and Features
Sodium Selenite is a supplement of selenite for animal nutrition.
The product has stable quality and good liquidity and is easy to mix process.
2. Â Introduction
Mixed feed additives and sodium selenite.
The additive of microelement selenite in feed.
Usage & Dosage:The recommended amount in the compound feed(calculated by Selenite mg/kg)0.1-0.3mg for livestock,0.1-0.3mg for fishes.
3. Appearance
Light Grey Powder
4. Product quality standard
1%selenite 5% Â selenite
Sodium selenite (counted by Se)% 1 ±0.05 5 ±0.10
Moisture % 5
Pass 450 m test sieve% 95
Total arsenic content (counted by As)% 0.0005
Lead content (counted by Pb)% 0.002
Cadmium content (counted by Cd)% 0.001
5.Packing:25kg/bag
6. Storage conditions, methods and precautions:
stored in cool and dry places, and used up as soon as possible once unpacked.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below
standards:HG28611997
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Specifications
Appearance white powder or granule
Total P 22%min
Ca 13-18%
F 0.18% max
As 10 ppm max
Pb 10ppm max
Moisture 4%max
Source of OriginRock
Packing and Storage Knitted bags lined polyethylene plastic bags double
packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.
Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% minÂ
F 0.18% max
As 30 ppm max
Pb 30 ppm max
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Chemical Properties
Boiling point 40 C
density 0.967 g/mL at 25 C(lit.)
vapor pressure 23 hPa (195 C)
refractive index 1.439
Fp 82 F
storage temp. Flammables area
solubility Miscible with alcohol, isopropyl alcohol and toluene.
form Oily Liquid
Specific Gravity 0.9671
color Light yellow
Item Specifications
Appearance Colorless transparent or light yellow liquid
Purity % 99.99
Aluminum content % 10.2-12.5
Density ( g/cm3) 0.92-0.97
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
