2)capacitor capacitance tolerance: +/-5% to +/-10% 3)capacitor working voltage: 250 -- 450 v4)capacitor temperature range: -40 - +70ípc 5)the capacitor has best quality and reasonable price
Model Flatpack2 380/3000 HE (UI)
Part number 241119.825
INPUT DATA
Voltage (nominal) 176 - 277 VAC / 260 - 400 VDC1)
Voltage (range) 85 - 305 VAC / 260 - 410 VDC1)
Frequency 45 - 66 Hz / 15 - 18.5 Hz2) / DC1)
Current (maximum) @ nominal input, full load 18.2 ARMS
Power Factor > 0.99 at 50% load or more
Protection
Fuse in L & N
Varistor
Disconnect when VIN is out of range
OUTPUT DATA
Voltage (default) 381 VDC
Voltage (adjustable range) 300 - 400 VDC
# Pb cell supported 156 - 168 3)
Power continuous (maximum) 3000 W
Power @ 85 VAC / 85 VDC 1200 W
Current continuous (maximum) 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC)
Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load) ±0.5%
Dynamic Voltage regulation ±2.0% for 10-90% or 90-10% load variation, regulation time < 10 ms 5)
Hold up time > 20 ms; output voltage > 300 VDC at 1500 W load
Ripple < 1000 mVP-P , 30 MHz bandwidth
Protection Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing diode, Fuse5), Short
circuit proof, High temperature protection, Overload shutdown4)
OTHER SPECIFICATIONS
Efficiency @ 230 VAC / 380VDC input 96.2% / 96.6%
Isolation 3.0 kVAC input to output, 1.5 kVAC input to earth, 1.5 kVDC output to earth,
3.0 kVAC CAN to primary, 3.0 kVAC CAN to secondary
Alarms (Red LED) Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage
shutdown on output, Fan failure, Low voltage alarm, CAN bus failure
Warnings (Yellow LED) Rectifier in power derate mode, Remote battery current limit activated, Input voltage out
of range, flashing at overvoltage
Normal (Green LED) Input and output ok
Acoustic noise, at nominal input and full load < 40dBA @Tambient< 25C / 40C
MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) 2 291 210h (@ Tambient = 25 C)
Operating temperature -40 to +75C (-40 to +167F), humidity 5 - 95% RH non-condensing
Output power de-rates linear from 3000W @ 50C (122F) to 980W @ 7C(167F)
Storage temperature -40 to +85C (-40 to +185F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight 109 x 41.5 x 327 mm (4.25 x 1.69 x 13) / < 1.95 kg (4.3 lbs)
DESIGN STANDARDS
Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013, UL
60950-1:2014, CSA C22.2 No. 60950-1-07
EMC EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 + A1:2010,
IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013
Environment
Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3)
Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating
conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised
2011/65/EU (RoHS) & 2012/19/EU (WEEE)
clients can order from our website directly online by paypal.
0-100mA/0-1A/0-500mA Large current signal output isolators(output power 5W,please check our DIN11D IAP series.
Features:
>> Optical Isolation
>> Accuracy grade: 0.1/0.2/0.5. Factory calibrated, the user can use directly
>> Auxiliary power supply: 5V/12V/15V/24VDC or 220VAC (± 10%)
>> One standard signal input: 0-5V / 0-10V/1-5V, 0-10mA / 0-20mA/4-20mA
>> One standard output signal: 0-100mA/0-500mA/0-1A current signal or 0~1V(max 1A)/0~10V(max 500mA) voltage signal
>> High linearity (nonlinearity > DIN35 rail mounting
>> Size: 106.7x79.0x25.0mm
>> Strong anti-electromagnetic interference and high-frequency signal interference capability
Application:
>> Analog signal data isolation, collection and transformation
>> Isolated 4-20mA or 0-20mA signal transmission
>> Signal isolation and conversion of industrial site
>> Long-term signal transfer without distortion
>> Instrument signal transceiver
>> Power monitoring, medical equipment isolation
Samples:
1: Input: 4-20mA Power Supply:24V Output: 0-10V ,20 ohm Type No.: DIN11L IAP A4-P1-V2(20 ohm)
2: Input: 4-20mA Power Supply: 24V Output: 0-500mA,20 ohm Type No.: DIN11L IAP V4-P1-Azï¼?Az:0-500mA,20 ohmï¼?
DIN11L IAP - V(A)â?¡ - Pâ?¡ â?? V(I)â?¡
Input Signal
Power Supply
Output Signal
Voltage
Code
Current
Code
Power
Code
Current
Code
Voltage
Code
0-5V
V1
0-1mA
A1
24VDC
P1
0-20ma
A3
0~5V
V1
0-10V
V2
0-10mA
A2
12VDC
P2
4-20ma
A4
0-10V
V2
0-75mV
V3
0-20ma
A3
5VDC
P3
user-defined
Az
1-5V
V6
0-2.5
V4
4-20mA
A4
15VDC
P4
Specification
Data rate: 10/100/1000M
Type: Copper
Distance: 100M
Connector: RJ45
DDM: Yes
Place of origin: Made in China
Port:Shenzhen
Features
1.Up to 1.25Gb/s bi-directional data links
2.Hot-pluggable SFP footprint
3.TX Disable and RX Los/without Los function
4.Fully metallic enclosure for low EMI
5.Low power dissipation (1.05 W typical)
6.Compact RJ-45 connector assembly
7.Access to physical layer IC via 2-wire serial bus
8.10/100/1000Mbps compliant in host systems with SGMII interface
Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment.
Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle.
Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Package type: Individual package or 10pc/package
10G SFP+ optical transceiver
ETU Model Cisco Model Product description
ESP8592-3LCD03 SFP-10G-SR 10G SFP+ SR MM 850nm 300M LC connector with DDM
ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM
ESP3192-3LCD10 SFP-10G-LR 10G SFP+ LR SM 1310nm 10KM LC connector with DDM
ESP5592-3LCD40 SFP-10G-ER 10G SFP+ ER SM 1550nm 40KM LC connector with DDM
ESP5592-3LCD80 SFP-10G-ZR 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM
SFP optical transceiver
ETU Model Cisco Model Product description
ES8512-3LCD05 GLC-SX-MM 1.25G SFP MM 850nm 550M LC connector with DDM
ES3112-3LCD10 GLC-LH-SMD 1.25G SFP SM 1310nm 10KM LC connector with DDM
ES3112-3LCD40 GLC-EX-SMD 1.25G SFP SM 1310nm 40KM LC connector with DDM
ES5512-3LCD80 GLC-ZX-SMD 1.25G SFP SM 1550nm 80km LC connector with DDM
ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM
ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
