Battery Monitoring Module BMS100 can be used in various industrial automation measurement and control systems. It can measure 4-20mA and 0-5V transducer signal of pressure, temperature,current,etc.It can measure server room battery management and voltage of each battery in each group.
1.Acquisition 2/4 channels of analog input 4 ï½? 20mA, 0 ï½? 5V, optional;
2.Adopt 12-bit AD acquisition processing, high accuracy measurement;
3.Standard Modbus-RTU protocol;
4.RS-485 (RS-422 optional) communication interface with ESD protection circuit;
5.Wide working voltage DC9 ï½? 36V, with anti-reverse protection function ;
6.Using industrial-grade chip, built-in watchdog, and has perfect anti-lightning and anti-interference measures to ensure reliability;
7.Configurable maximum and minimum value of analog input, intelligent conversion of actual value, convenient for various analog measurement requirements;
8.Can measure 12 single battery voltages,several battery group and 1 total voltage;
9.It has 3 precision gears for different voltage ranges to improve the voltage measurement accuracy;
10.With LED light to indicate working status, easy to install and debug on site.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
MODULE VIBRATION MONITOR JM-B-6Z/311
YOYIK, with advanced technical equipment and rich industry experience, provides all-round solutions for technical transformation and overhaul projects in thermal power, hydropower, steel and other fields. From equipment selection to installation and commissioning, to after-sales service, every link reflects the company's professionalism and meticulousness. At the same time, as a multi-brand agent, YOYIK ensures that every product is authentic and reliable to meet the personalized needs of different customers.
Yoyik can offer many spare parts for power plants as below:
#DF-MODULE VIBRATION MONITOR JM-B-6Z/311-DF
Slip Detection Device Switch DH-III
LVDT UKTD1-A01-B060-C01-D10-E01-F01
pressure indicator 3051CD2A22A1AM5B4\-9.5~9.5kPa\0.5
PRESSURE SWICTH CONDENSER VACUUM 02-139479
Bolt electric heating rod ZJ-16.5-13
Single channel DC isolation transmitter CE-VZ01-54MS1-0.2
HP DIFFERENTIAL EXPANSION PR9376/010-011
speed sensor CS-1 G-110-02-01
Rectifier bridge cooling fan GDRM35-133B-2
linear lvdt ZDET1000B
Pneumatic Actuator GDR085 F05F07YS17/S14
LVDT transmitter XCBSQ-04/200-01-00
rotational speed sensor types for rotation speed monitor DF9011
Frequency converter power module DPC300D2BX-B
Pressure Switch HERION 396723-SA6B2530-0INHG
Bolt electric heating rod ZJ-14.5-180
Differential Pressure Switch 2 RC0766CZ097H
VCB CHASSIS DPC-4/4A-1000
Eddy Current Sensor PR6423/002-121
Eddy Current Sensor PR6422/103-011
Eddy Current Sensor PR6422/001-020
precision temperature controller WSS-471
BALLUF BTL032K BTL5-E10-M0300-P-S32
Multifunction power meter PD194E-9F2
LVDT Sensor CCC9.231.114
Eddy current sensor DS821.ds1003/10/039/012/010/000/0
SWITCH PROXIMITY NBB15-30GM50-E2
Sensor DF310880-90-01-02
Anti interference LVDT Sensor TD-1K-150-15
Percentage boards ME5.530.012
Rectifier Bridge Control Board CCI (PC D231)
MODULE VIBRATION MONITOR JM-B-6Z/311
lvdt measurement systems TD6000
Electromagnetic brake SDZ1-04
Sensor DF310880-90-04-00
Vacuum pressure transmitter ZS-II
MODULE VIBRATION MONITOR JM-B-6Z/311
