Local repair of cable sheath damaged by mechanical, burning or organic solvent erosion. Waterproof sealing treatment for sheath end of heat shrinkable cable intermediate joint. Protection of live bare conductor passing through tree and short circuit treatment of ice pillar passing through tunnel.
Jacobs KE30F Cloth Insulation Tape consists of a cotton cloth backing, coated with rubber adhesive. it has good insulation property and aging resistance, which is mainly used for wrapping and insulation protection of cable and wire joints it is also suitable for low temperature application. APPLICATION RANGE Insulation protection for electrical wires and cable joints up to 380V Wrapping cable and wire joints. Wrapping, insulation and repairing wires and cables in low temperature application PRODUCT FEATURES Easy ti tear Good adhesion Operating Temperature :- 10 to 40 degree C Good insulation aging resistance Specification Thickness : 0.35mm, 0.45mm Customized size is possible
Jacobs 52 HT EPR Insulation Tape is a self-amalgamating / fusing tape EPR material which has excellent Insulation self-fusing performance and stability. Its continuous working temperature is 90 deg C and Emergency overload temperature can reach upto 130deg c, conducive to heat dissipation at the joint. With excellent physical and electrical properties, it can quickly fill the gap to form the moisture resistant sealing protection layer. It can be used for low and high voltage joint upto 69kv. Size : Width : 19mm,. 25mm, 38mm, 50mm and upto 1250mm Length : 5m, 9.1m, 10m and upto 33m Thickness : 0.76mm Product Features: High Insulation protection, voltage upto 69kv High comformable, suitable to any irregular surfaces Emergency overload temperature upto 130 deg C Good weather, UV, low and high temperature resistance. Easy installation, Time saving, No need heating and special tools. Under certain tension, it can self fusing quickly. Insulation for Bus bar connection and cable end seals.
Packaging Type Roll Usage/Application Sealing Brand SuperStick Pattern Plain Material Type Kraft paper Color Brown Tape Width 20-40 mm, 40-60 mm Feature Water Proof Adhesive Side Single Sided Paper Tapes are available with kraft, crape or any kind of recyclable paper coated with adhesive. Features: Eco friendly Wide color range Good holding power Heat insulation property Usage: Paper Tapes is used in automobile, aircraft manufacturing, appliances manufacturing, HVAC. The paper tapes are used as eco friendly packing, marking and holding application. These paper tapes are also used as insulation in electrical industries
Type Single Sided Feature Heat-Resistant Use Bag Sealing Adhesive Silicone Films Tapes are made with BOPP/Polyester/PVC/LDPE/PTFE film coated with single and double side adhesive layer according to application. Features: Good insulation property, Water and chemical resistant, Longer life and good strength. Usage: Polyester Tapes with single side adhesive coating are used as insulation in electronics and electrical industries. Special adhesive coated Polyester tapes are used as holding tapes in all electronic appliances. PTFE-Teflon coated with silicon adhesive can be used for non stick application in all printing and lamination industries
Product Details: Tape Width 60-80 mm Use Carton Sealing Adhesive: Acrylic Foam Tapes are made with single or double sided adhesive coating to meet the customerâ??s requirements Usage: Single sided foam tapes are uses as gaskets, seals or heat or cold insulation in HVAC, automobile, refrigerator, air-conditioner, electronics appliance and electrical panel industries. Special rubber and PU foams are used as ant vibration and sound dampeners in electrical and electronic industries
Use Bag Sealing Adhesive Side Double Sided Material Polyimide Polyimide Tapes is made from specially treated base coated Polyimide film having adhesive of silicon or Acrylic coating on another side. Features: It has the sound withstand voltage, High-temperature resistance and solvent resistance features. Uses: The product (Polyimide-Kapton tapes) has mainly been utilized in the gold finger protection during the components mounting on printed circuit board (PCB) through wave soldering, transformer insulation binding, lithium cell( battery) polar ear fixing, and other occasions where need heat-resistance.
Tape Length 10-20 m Thickness 0.11-0.2mm Adhesive Rubber Cable harness also known as a wire harness, cable assembly, wiring assembly or wiring loom, is an assembly of cables or wires which transmit signals or electrical power. Features: It has electrical insulation property. Flame retardant(FR) and ROHS grade PVC Tapes are specially used for Harnessing application. Usage: Commonly used in automobiles, Electronics appliances (white goods manufactures), aircraft industries. Normal PVC Tapes are used for electrical Insulation of all cables
hickness 0.4mm-2.2mm Feature Heat-Resistant Adhesive Acrylic Acrylic Foam Tapes (eq.to VHB) are available in Grey, white, black and transparent color with paper and plastic film release. Usage: Super strong bond (SSB)- acrylic foam tapes (3M VHB) is used for mounting parts, logo and accessories in automobile industries, White goods industries, HVAC, LED light mounting, curtain wall and cladding purpose in construction.
Tape Width >100 mm Tape Length >50 m Color Silver Use Bag Sealing Adhesive Acrylic Material Aluminium Foil Aluminum Foil Tapes are coated with acrylic or rubber adhesive and available with or without release paper. This foil tapes are available with 25 mic-100 mic thickness. Features: Shiny silver, U.V. resistance Flame, moisture and many chemical barrier Good for harsh Long term outdoor application It has hot & cold insulation property Usage: Widely used in tubes and lead jointing for air conditioner, refrigerator and water heaters. For wrapping on pipes, engines and wires as a heat & water resistance. Used as a static ground application.