Supply Alloy Steel Casting

Special Use: Cold Heading Steel
Wire Gauge: 1.8mm-5.5mm
Application: Construction
Alloy Or Not: Is Alloy
Type: Galvanized
Place of Origin: India and China

65Mn CK67 high carbon cold rolled spring steel strip
Hardened and Tempered Steel Strip
Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties
Standard AISI, ASTM, BS, DIN, GB, JIS
Place of Origin China
Material Hot Rolled
Surface Polished
Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade
Brand Name HENSON
Width 2.0mm-300.0mm
Length Customize
Tolerance +/-10%
Hardness 40-55HRC
Surface nature, blue, yellow, white, polish
Edge Slit,Round,Square
MOQ 1000KGS
Tolerance thickness+/-0.01mm max,width +/-0.05mm max
Type strip,coil,sheet
Coil ID 300-500 mm
Tensile Strength 540-1575N/mm2
Yield Strength 370-1475N/mm2

Steel and alloy steel castings of grades wcb, lcc, lcb, cf8m, cf3m etc, up 650kgs per single piece, with proof machined or unmachined condition.

Depends on customer requirement

Nickel-based shape memory alloy casting
Category:Nickel alloy casting
Nickel-based shape memory alloy casting is mainly used in aerospace and biomedical fields. Common grades are N06600 etc.
Nickel-based shape memory alloy casting usually uses a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content.Shape memory alloys are made of springs and other devices, and can also be used as fire prevention devices. It can also be used in various sensors.
Nickel-based shape memory alloys usually refer to nickel-titanium alloys. By changing the proportion of titanium in the alloy, the recovery temperature of the alloy can be different. Because of the characteristics of shape memory alloys, it is widely used in the fields of aerospace and biomedicine. important role.
Shape memory alloys have a shape memory effect, which can restore the shape before deformation at a specific temperature. At present, it plays an important role in the aerospace field and is used as an interface sealing function in pipeline transportation. In addition, it also plays a role in medicine, and can be used as artificial bones, spectacle frames and so on.

Galvanized GI Steel Rolls & Plates & Coils
Whatâ??s the difference between galvanized GI steel coils and plates?

I. Definition
Galvanized GI Steel coil and galvanized sheet are galvanized steel. The galvanized coil is a continuous hot dip galvanized coil in the production process. While galvanized sheet is a single hot dip galvanized sheet in the production process.

2. the production process
The production process of galvanized coil and galvanized sheet is different.

The production process of galvanized coil generally includes multiple processes such as coil heating, hot dip galvanizing and shearing into coil.

The galvanized sheet is generally the zinc alloy coating through the hot dip technology directly coated to the surface of the steel plate.

So the production process is relatively simple, the process difficulty is relatively low.

3. material thickness
The material thickness of galvanized coil and galvanized sheet is also slightly different.

Generally speaking, the thickness of galvanized coil is relatively thin. We mainly use it for the production of cold rolled, coating and other thin steel products.

The thickness of galvanized sheet is relatively thick. We mainly use it in the manufacture of glass fiber reinforced plastic, automotive panels, roof panels and other steel products requiring strength and corrosion resistance.

4. Advantages and Disadvantages
Both galvanized coil and galvanized sheet have their own advantages and disadvantages.

The production cycle of galvanized coil is short, the process is simple, and it is suitable for the production of low thickness and high precision steel products.

The galvanized sheet has the advantage of hardness, corrosion resistance, wear resistance and other multiple properties.

However, the production process of galvanized sheet is time-consuming and laborious, and the production cost is relatively high.

5. Application fields
The application areas of galvanized coil and galvanized sheet are also different.

Galvanized coil is usually used in the production of home appliances, building materials, auto parts, pipes and other high-demand steel products.

The galvanized sheet is mainly used in automobile manufacturing, construction engineering, petroleum, chemical and other industries.

In addition, because of the good corrosion resistance of galvanized sheet, it is also widely used in Marine engineering, railway, bridge and other fields.

We produce and sell steel pipes, carbon steel pipe, GI pipe, carbon steel pipe , SS pipes and Spiral steel pipe in long term.
Our factory have plenty of steel in stock and customers can find the right products.

GI pipe Q195, Q235, Q345,
Stainless Steel (SS pipe) 201, 304, 316, 316L
Seamless Pipe 42crmo, 20, 35, 45
OD Size 12mm, 20mm, 25mm, 40mm, 50mm, 10mm-600mm

Buyers please send us steel pipe specificationss on OD size, wall thickness, steel grades and quantity to quote cost.

Application of our castings:
Petrochemical Machinery Industry,
Mining Machinery Industry,
Agricultural Machinery Industry,
Construction Machinery Industry,
Railway Parts,
Engineering Machinery Industry
Other machinery parts

Available materials of our castings:
carbon steel, alloy steel, stainless steel, etc.

Experience of castings:
more than 1000 sets of moulds, 25 years manufacturing experience.

Craft: precision casting
Machining: CNC machining
Quality Standards: GB.ASTM. AISI. DIN. BS. JIS.


Wooden case.

We hereby take this opportunity to introduce ourselves as Marsman India Cranes Pvt ltd. as one of the leading foundries in nashik.

We have a Monthly capacity of 750 MTS up to maximum weight of 4000 Kgs. Single piece. We can produce casting conforming to almost all grades of steel, Manganese, CI, and SG Iron to customerâ??s requirement and satisfaction.

We have in-house physical laboratory and state of the art spectro testing facility for maintaining the quality standards as per the customer requirement.

While blending talent & technology we synergise the energies of our well experienced & dedicated technical team to produce castings of sophisticated quality at competitive rate.

We have the requisite plant & machinery to manufacture even the complicated castings with utmost precision and close dimensional accuracy.

We are enclosing a catalogue of different activities of our foundry.

We now approach you with confidence to cater to your casting need. Delivery & quality are of paramount importance to us.

Should there be any quarry, please feel free to contact us.

Thanking You,