Portable Waveform Recorder

Features:
Please notice that our X431 can be updated by internet. X431 auto scan tool is a new generation of product. It's a perfect marriage between automotive electronic technology and information networking. X431 adopts open diagnostic technology, which is the most advanced in the world as well as the future of automotive diagnosis. It carries PDA functions apart from reading trouble code, data stream and actuation test, sensor waveform and digital code control.

Product character:
To interface with computer with X431-PCLINK (optional) to store test data in vehicle service record;
To simulate and test sensors with the help of sensorbox (optional);
To test the parameters of the battery and conduct analysis on battery conditions through batterybox (optional);
To print out test data any time with built-in printer;
Easy operation through handwriting input on large touch screen;
As generic diagnostic equipment, it can interface with diagnostic adaptors of all vehicles models in the world;
Strong test capacity to cover all electronic systems;
Unique reading of date stream to ensure fast date updating;
Strong waveform display to monitor any change in the data stream;
Embedded operation system and open-platform diagnosis to make effective diagnosis possible;
Integrated adaptors featuring compact design and reliability;
Complete after-sales service system to give life-long service;
Multi-language choices and easy update by the Internet.

Reference:
Operation System: Linux
CPU: 32-bit processor
CF card: 128M
Interface: Standard serial/ parallel port
Power: DC12V
Output: Approx. 9W
Printer: Mini thermo printer
Printer interface: Standard parallel port
Screen: 240*320 LCD touch screen with backlight
Structure: main units, Smartbox and mini printer

Measuring system

It is a portable measuring system with ip67 coverage. These features predetermine
Magic xbm to outdoor measuring and working in heavier climatic
Conditions. The system enables to measure three values at a time (depending on
The type of the smart probe) and gives the possibility to use a submersible probe
With ip 68 coverage. Laboratory probes can be connected as well. All types of
Smart probes are interchangeable and compatible. The linking interface is a part
Of the pda.
The time of data recording during the dataloger function
Example: when the record interval is 20 minutes, the outdoor xbm can work
About 1 month on its own internal energy source. A reserve accumulator can be
Supplied for longer lasting or more frequent monitoring.
7
Another version of magic xbm is a bench pda, which can measure up to 4
Values at a time. The pda is placed in a voltage bolster from which up to 4
Sensors can be supplied. Next to the bolster one sensor can be connected directly
To the pda. When the pda is not used for measuring, it can be used as a
Personal organiser.
This version of magic xbm is capable of precise laboratory measurements and
Can replace all types of bench and portable measuring instruments

Digital Mobile Microscope
(Our 3-in-1 Multi-function Video Magnifier Camera)
Model No.:FPC-M006

Its a Multi-function Microscope (3-in-1: camera , video and magnification)
Multi-model (Supports 5 models- Moving Insect\ Sepia \B!RW \egative \Text);
LCD widescreen user interface;
Portable, mobile and pocket size;
Dynamic record;
Provide unlimited working space for you.
LED Brightness Control: 4 LED Lights built-in, Support LE modes:(Low, Medium ,High ,Off)
USB 2.0 High Speed for transferring images to a PC

Feature:
1. Product Size(L*W*H): 115Lx68Wx24.6Hmm; LCD: TFT 2.7!a
2. Sensor: 5.0 Mega pixels CMOS
3. Still Image resolution: 5.0 Mega pixels(2560x1920 ); 3.0 Mega pixels (2048x1536);
4. 1.3 Mega pixels (1280 x 960); VGA!]640*480.
5. Video Resolution: VGA!]640*480 !^QVGA (320*240).
6. Magnifying Rate: Hardware Zoom!G17X for magnifier mode; Digital Zoom:1.0X-32.0X
7. Enlarge image to 544X.(17X32=544X)
8. Interface: USB 2.0 high Speed.
9. Focus range: Manual Focusing: 0.1mm-50mm ( 3 Steps).
10. Playback Zoom: 4X!FImage Playback: Single / Thumbnail
11. Auto Power Off: Off/1Minute/ 3Minute/5Minute
12. File format: Picture: JPEG; Video; AVI
13. External memory card: SD/SDHC(Supported to 16GB)
14. Power source: 4x AAA Alkaline Batteries
15. Language: S-Chinese/T-Chinese/English/German/Italian/Portuguese/Japanese/French/Spanish.

Application:
Industrial Inspection,
Computer Parts Inspection
Scientific teaching tool
Telecom module inspection
Laboratory Research
Medical analysis
School Research tool
Insect dissection/examination
Plant dissection/examination
Skin examination
Scalp examination
Textile Inspection
Jewelry Inspection
Collections/Coin Inspection
Printing Inspection
Reading Aid
On-line chatting
Presentation etc.

Packing and Accessory:
FPC-M006 Microscope
Protection Bag
Cleaning Cloth
Instruction Manual
Rope bag
Weight : 0.07kg. (excluding batteries).

Introduction

3 phase transformer on-load tap changer testeris mainly used to test three-phase transient time, transition waveform, transition resistance, synchronization state, etc. The transformer on-load switch tester is a comprehensive transformer on-load switch measurement and tester, which is used to measure and analyze the electrical performance indicators of power transformers and special transformers on-load tap-changers. The transformer on-load switch tester can automatically capture and display the transition resistance during the transition process. There is also a process of time jumping.

Technical parameters

Three phase constant current source charge,charge current: 3A/1A; 0.6A/0.2A

Maximum voltage of the port: 24V

Maximum range of transition resistance: 100

Measuring range: 1A 0.4 20 0.2A 10 100

Record time of waveform:300ms

Sample rate: 30k

Resolution of time:0.1ms

Resolution of resistance: 0.1

Accuracy of transition resistance: ±5% Reading±0.1

Accuracy of transient time: ±0.5% Reading±0.2mS

Temperature: -10-40 Humidity:

1. Electronic control and tune easy to operate.

2. The date of voltage and current are recorded in the panel reading without conversion.

3. One minute timing and tip function.

4. Perfect over-voltage and over-current protection function inside also zinc oxide over-voltage protection outside which ensure safety of generator.

5. Portable design suitable for on-site testing.

6. Four parts separated: control unit Intermediate Frequency Transformer doubler and accessories all packed with special shockproof aluminum alloy cabinet easy to move.

Overview

This device is designed and manufactured for 35kV cable AC withstand voltage test. The reactor is individually designed for multiple units, which can not only meet the test conditions of high-voltage and low-current equipment, but also meet the low-voltage AC withstand voltage test requirements of 10kV cables.

The special AC resonance test system for cables adopts the method of adjusting the frequency of the power supply, so that the reactor and the capacitor under test can achieve resonance, and the high voltage and large current can be obtained on the test product. It is a new method of current high voltage test and The trend has been widely used at home and abroad.

The AC resonance test system uses a dedicated SPWM digital waveform generator chip with a frequency resolution of 16 bits, and the frequency fineness can reach 0.1 Hz at 20 to 300 Hz; it adopts an orthogonal non-synchronous fixed carrier modulation method to ensure that the entire frequency The output waveform is good in the interval; the advanced IPM module is used in the power part to ensure the stability and safety of the instrument under the minimum weight.

The test system consists of a frequency and voltage regulation power supply, an excitation transformer, a reactor, and a capacitor divider.

Technical index

1. the resonant excitation power supply only needs 1/Q of test capacity, which is 1/10-1/30 of common test unit and reduces the system weight and volume greatly.

2. Rated voltage:

1.108kV meeting the alternating current withstand voltage test for 35kV cable;

2.Waveform distortion rate of output voltage should be less than 1.0

3.The permissible continuous working time is to work for 5 minutes at one time under rated condition.

4.Quality factor of unit itself: Q 50



Advantage

1.The power capacity needed is reduced greatly.

2.The weight and volume of equipment is reduced greatly.

3.The waveform of output voltage is improved.

4.The large short-circuit current is prevented from burning fault point.



Feature:

1. A large number of cables with voltage levels of 35kV and below are used, and the test workload is large, so this type of withstand voltage test device is small in size and light in weight, and a portable cable withstand voltage test system was born;

2. This system requires that the weight of the parts that a single person can move on-site does not exceed 30kg, and the weight of the parts that two people can move on-site does not exceed 60kg, which is suitable for on-site transportation;

3. The power supply adopts 220V single-phase power supply or 380V single-phase power supply, which is convenient for on-site power supply;

4. The reactor part is made of dry epoxy casting, which is beautiful and reliable, suitable for the requirements of various cables;

5. The withstand voltage test of 110kV and above cables adopts oil-immersed reactors.

product brief introduction Product Introduction
series is the equipment of testing DC voltage and DC leakage current of water-cooled generator in the situation of water through which completely overcome the problems of long blow water time bottom water hard to dry easy to cause arcing within the coil. The device is light simple wiring and easy to read. Polarization compensation voltage is output directly by the case.




product features Product Characteristics
1. Electronic control and tune easy to operate.

2. The date of voltage and current are recorded in the panel reading without conversion.

3. One minute timing and tip function.

4. Perfect over-voltage and over-current protection function inside also zinc oxide over-voltage protection outside which ensure safety of generator.

5. Portable design suitable for on-site testing.

6. Four parts separated: control unit Intermediate Frequency T

product brief introduction Product Introduction
series is the equipment of testing DC voltage and DC leakage current of water-cooled generator in the situation of water through which completely overcome the problems of long blow water time bottom water hard to dry easy to cause arcing within the coil. The device is light simple wiring and easy to read. Polarization compensation voltage is output directly by the case.




product features Product Characteristics
1. Electronic control and tune easy to operate.

2. The date of voltage and current are recorded in the panel reading without conversion.

3. One minute timing and tip function.

4. Perfect over-voltage and over-current protection function inside also zinc oxide over-voltage protection outside which ensure safety of generator.

5. Portable design suitable for on-site testing.

6. Four parts separated: control unit Intermediate Frequency Transformer doubler and accessories all packed with special shockproof aluminum alloy cabinet easy to move.