1. 5 LED digitally display output by actual value or by percentage
2. AC/DC current output range: 0~100 uA ~500uA ~2mA~5mA~20mA ~50mA ~200mA ~500mA ~2A~5A~20A~30A(optional)~50A(optional)
3. AC/DC voltage output range: 0~200mV~1V~2V~5V~10V~20V~50V~100V~200V~500V~1000V
4. Three AC frequency for option: 50Hz 60 Hz 400 Hz
5. Auto protection or manual resetting function for over load
6. Over load rang is 10% for each level of voltage current
7. Clip-on transformer testing: matching with our product of standard coil measuring range AC 0~750A ( above 1000A for part of meters) DC 0~1000A error: ±0.3%
The portable Three-phase standard power source is suitable for metering departments, power distribution terminals, power management, reactive power compensation devices and enterprise production.
To set up and take the load regulation of voltage, current, phase angle, frequency and power factor, also can be used as AC current source, AC voltage source or power source.
To set 2-128 times of the amplitude and phase harmonics, and it can be added to the base wave in every harmonic output.
Frequency value is adjustable (AB and phase C).
Voltage, current output a wide range, big power, high stability, waveform distortion degree is small.
Strong with load ability, but it can take capacitive, sensibility, resistance of composite type load or load and load regulation is higher than 0.01%.
To apply the 32 bit MPU + DSP + FPGA, powerful flexible.
To use hardware PID, fast response, the change of load will not cause output volatility.
Industrial frequency waves as high as 50000 points a week of the wave kneading, signal output without filter, precise output waveform, the harmonic output precision, harmonic distortion degree is small.
Range switching automatically
To use software calibration, simple operation, stable and reliable.
To have big screen, 320 x 240 LCD display, Chinese or English interface, operating simply.
To have perfect over-current, over-voltage, heat, a shorts-and-opens, overload protection, failure detection automatically.
With RS232 interface, and PC connection
To take place machine software, it can be output through the PC software program.
This AN8721PV3(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, accurate and durable.
Features:
AC/DC universal wide-range, DC ~ 4kHz bandwidth, load adaptability;
Reliable, stable, compact, light;
High measurement speed, up to 0.25s refresh rate;
Voltage/current ratio setting, easy expansion;
Voltage, current, power over-limit sound and light alarm, quick identification of abnormal products;
Standard RS-232 or RS-485 serial port, MODBUS communication, test automation;
Optional digital I/O, remote input and alarm signal output.
Applications:
Strict industrial site type test;
High temperature aging room test;
Home appliances, commercial appliances line standby power measurement;
Power tools test;
Lighting test.
Single phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source.
Electrical parameters
Electrical parameters
Accuracy class
0.05, 0.1
Power supply
Single phase AC 85-265V, 50 60 Hz
AC Voltage output
Range
57.7V 100 V 220V 380V, Switch automatically max 500V
Single-phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source.
Especially developed for indication and supervision of the low-medium voltage three phase electrical network measurement also can be used in DC circuit. It can replaces other analogical panel meter reducing installation manpower and optimizing the used one of spaces in the panel.
High accuracy class up to 0.02%
High stability, high reliability
Measuring 2nd~51st harmonics
Metal structure, strong and reliable
Waveform display function
Vector diagram function
Energy accumulating function
Suit for testing in the lab
As a three phase reference standard
