Leakage Current Prevention Device

"Luxfine LCP leakage current prevention device" is a power supply device that prevents leakage current, and electrical devices used by receiving power through this device are safe from leakage current.
Leakage current is the current generated by an electrical device outside the normal track, i) the current flowing between the applied live line and the ground, ii) the current flowing between the live line and the neutral line (N), e.g., between the two terminals of the outlet.
When a person encounters a conductor of an electrical device, the leakage current flows through the human body and poses a serious threat to the body and life. "Luxfine LCP" allows the human body to safely use electricity by preventing current from flowing even when it encounters the conductor of an electrical device. It allows safe use of electricity even in humid places or when flooded.
Existing short circuit breakers are designed to protect the system by operating at leakage currents above 30mA, but the risk of electric shock is always present in sections below 30mA where the short circuit breakers operate normally. In other words, the current between 6 and 30mA also has a significant effect on the body's muscular control and nervous system, leading to secondary accidents or death. Leakage current causes failure, malfunction, life span reduction, fire, etc. of not only the human body but also the electrical equipment used.
To prepare for electrical hazards that may occur in the event of a malfunction of a short circuit breaker or in a section below 30mA that is not protected by a short circuit breaker, equipment that can fundamentally block leakage current was developed. The current between the conductor and the ground of the electrical device using this equipment is almost "Zero" amperes.
"Luxfine LCP" has built-in functions to drastically reduce the generation of electromagnetic waves that are fatal to the human body and to pre-detect the risk of fire due to aging power lines or de-insulation.
In addition, to single-phase 220V, three-phase 380V, products ranging from 300VA to 10kVA are developed as standard models. Commercial and industrial applications with much larger capacity, as well as products with a step-down function of input 220VAC and output 110VAC can be also customized.

Applications

Places that require a lot of moisture and water, sewage treatment plants, water purification plants, fish farms
The expensive old equipment that needs to be overhauled due to leakage current
Streetlight pole, signal light pole in areas vulnerable to electric shock or habitually flooded

This is the world's first developed leakage current prevention device with proven practicality.

With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters.

These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems.

- Food factory
- Underground utility tunnels
- Underground workshop
- Fish farms
- Street light poles
- Smart farms
- Disaster prevention device

Would you please find the attached youtube video for the CE-certified leakage current prevention device?

It is the world's first developed leakage current prevention device with proven practicality.

With this equipment, we can use the electricity safely without worrying about the electric shock where we should use electricity in the water as well as the humid area. This item must be suitable in Japan where there are a lot of natural disasters.

These items are made for 220V one phase and 380V three phases can be used in the following applications, and we can develop it for 100V also without any problems.

- Food factory
- Underground utility tunnels
- Underground workshop
- Fish farms
- Street light poles
- Smart farms
- Disaster prevention device

Leakage current prevention device Japanese Version.

For more information, please do not hesitate to contact me.

80% High Color Rendering Index
Perfect Thermal Control with One body Diecasting Aluminum Housing
Ultra-slim and light solution
Adopting a temperd glass preventing from external shock
High reliability with internal SMPS or AC direct drive IC
Perfect solutions for wall washer, parking lot, tunnel light and high mast lights

LED streetlight, wind turbine, hybrid solar streetlight, solar streetlight,

Winglet structure with the tip bent inward
Innovative material-EPP(Expanded Polypropylene) blade with an aluminium frame inside
New Technology to store and re-use wind
Maximum efficiency with greater blades
From 30 to 60W LED streetlight

Highly Efficient Products of 170lm/W (Separate Converter type) with elegant design. It looks great anywhere. (120~130lm/W Driverless type)
With Max 20kV Power Surge protection device preventing the damage originated from the indirect surge and the inductive switching surge.
Thermally stable aluminum stamping and diecasting structure and ultralight design to minimize the risk of falling loads.
Adopting RF wireless dimming controller for remote on/off and the predetermined dimming with LTE communication (Option)
By adopting the AC drive IC, a simplified and reliable circuit system has been ensured. (Driverless type)
Not using the transformer and the electrolytic capacitors, the necessity of using the other components for modification of the PF, THD, and EMI has been fundamentally excluded. (Driverless type)
With the perfect waterproof design and the AC drive IC, it can be applied for the refrigeration warehouse less than -30C as well as hazardous area lightings. (Option)
By the internal PWM control, PIR sensing and dimming is also possible. (Option)

Performs ultra-high efficiency
Winglet shaped blades
Innovative blade with Styrofoam material
New technology to store and re-use wind
Performs higher efficiency with extended blades
From 3Kw to 15Kw
Integrated with Solar Module as per requirement

Main Features 1.Measuring Range0.01-1200
2.Stored Data99 sets
3.Clamp Size64mm*32mm
4.Power Consumption:Maximum 50mA
5.Current range:0.00mA-20.0A
Model No.: MEWOI3000D+
Name: MEWOI3000D+-0.01-1200/0.00mA-20.0A Clamp on Earth Resistance Tester/Meter,earth ground tester,GEO Tester
Low Battery Indication: Low battery symbol displays when battery is lower then 5.3VPower Consumption
Power consumption:Max 50mA either in booting up or normally working, Continuously working for 30 hours

Main Features: 1. Measuring scope:AC 0.00A-6000A(50/60Hz)
2.Accuracy:AC 0.01A
3. Clamp mouth: 200mm
4. LCD display:44mm*27mm, Data Storage:4200sets
5.Data upload: RS232 interface6.Working Time:100hours
Model No.:MEWOI9000GB
Name: MEWOI9000GB Flexible Coil Leakage Current Monitoring Recorder/Logger
Host Dimension :W*L*H75mm*170mm*30mm
Time Setting: Recording internal adjustable from 1 to 60 min, If set to 0 min, the auto-
store function is turned off
Recording Time: Continuously operate for about 100hours at the power-saving mode Line Voltage: Line with a voltage up to AC600V

MEWOI9000GB flexible high current clamp / logger is specially designed for field-line testing, monitoring, recording AC leakage current and Large current, It consists of host, flexible current clamps, monitoring software, communication lines and other components. Widely used in electric power, telecommunications, meteorology, railroad, oilfield, construction, measurement, research and teaching departments, industrial and mining enterprises and other fields. Particularly suitable for cable-intensive places, the wall transformer core grounding current test, thick wire cable test, relay protection , frequency conversion, semiconductor switches, electronic power conversion equipment, arc welding and other serious signal distortion current testing industrial environments.