28XX Punch Attachment
(Shown with and without stripper)
Accommodates all standard 28XX tooling
Expand punching capacity up to 5"
Mounts in place of standard punch holder and die block
Available with and without urethane stripper (shown)
Note: Standard 28XX tooling is for 50-ton and lighter applications. For applications greater than 50 tons, a heavy-duty punch is required. Please refer to the Piranha Tooling & Attachments catalog for more information.
* Punches up to 1-9/16" hole within capacity limits of the machine * Mounts in place of standard punch holder and die block * Use same stripper action as standard punch attachment * Use No. EF punches and No. JF dies * Available in P-50 and P-65 models
Punch channel legs and other structural shapes Use standard punch holder and material stripper Punch close to material web with offset dies Mounts in place of standard die block Die is flush with front of channel die block Designed to punch a hole in the leg of a 3" through 6" standard weight channel Designed to punch a hole in the web of a 4" through 6" standard weight channel 50 ton punching capacity for all models Uses urethane punch attachment (P-50, P-65, P-90, P-110 and P-140) Note: The machine stroke control must be used with this option.
Fast set-up for punching multiple holes Includes plate and angle-gauging guide bars Left and right hand extensions available in 5' and 10' lengths auging table mounts on machine platen table without removing punch attachment or die block Table and guide bars have measuring rules All models have 3 left-hand stops on the table and 6 stops (3 lefthand and 3 right-hand) on the angle guide bar
Channel Shear * Attaches to punch end of ironworker in place of standard punch holder * Each cut removes 1/2" slug from standard weight channel * Slug slides out the front of the shear after each cut * Pinned slide block adjusts to accommodate different widths of channel * Quick release locking handle secures material
Pg Stamping Mold with Good Quality (carbide punch AF1/KD20). Type: Progressive Die Material: Tungsten Carbide Surface Processing: Hip Process: Forming Process Tolerances: 0.002mm Name: Punch Size: 10mm*20mm*52mm Specification: 10mm*20mm*52mm HS Code: 8207300090 Processing Type: Shaping Metal Mould: Multistep Progressive Dies Fine Blanking: Open Industry: Metal Stamping Parts Customized: Customized Processing: Profile Grinding(Pg) Tolerance: 0.002mm. Special Introductions: Material:RD50(Carbide) Processing Machine:Surface grinder, Profile Grinder Outside contour Tol.:±0.001mm Profile Tol.:±0.002mm Measuring instruments:Projector, Toolmaker Microscope Design:non-standard parts, according to customer's request Quotation:We will quote in tow hours once we receive inquiries Delivery Time:5days Packing:Carton, attached Quality Control report
Type: Progressive Die Material: Tungsten Carbide/ Hss Surface Processing: Hip Process: Forming Process Tolerances: 0.002mm Name: Punch Size: 10mm*4mm*50mm Cutting Length: 15mm Package: Foam Origin: Dong Guan China Processing Type: Shaping Metal Mould: Multistep Progressive Dies Fine Blanking: Progressive Die Industry: Metal Stamping Parts Customized: Customized Processing: Profile Grinding(pg) Tolerance: 0.002mm Speci: Non-standard&standard Specification: 4mm*10mm*50mm. The Cutting Length Area With Mirror Surface, The Surface Roughness Is Around Ra0.03, Tolearnce Can Be Controlled In ±0.002mm. Grind Cutting Area Only, Without Any Hand Polishing. Special Introductions: Material: Af1/hap40 Processing Machine: Surface Grinder, Profile Grinder Outside Contour Tol.: ±0.001mm Profile Tol.: ±0.002mm Measuring Instruments: Projector, Toolmaker Microscope Design: Non-standard Parts, According To Customer's Request Quotation: We Will Quote In Tow Hours Once We Receive Inquiries Delivery Time: 2days Packing: Carton, Attached Quality Control Report
Application: Stamping Mould Processing Method: Grind, Wire Cut Process Combination: Single-Process Mould Driving Motor Type: Permanent Magnet Milling Speed: High Speed Size: 20mm*35mm*10mm Specification: Non-Standard, Standard, 20mm*35mm*10mm Origin: Origin in Dongguan China Material: Hard Alloy and Steel Bonded Carbide Technics: Cutting Die Manufacturing Technology: Automation Technology Mold Cavity Technology: The Traditional Forming Electrode Machining Parts Detection Method: Geometric Detection Life Time: 3 Years Production Ability: 1000PCS /Mouth. Scope of business: Stamping molding assembly, tungsten carbide tooling, CNC profile grinding, CNC wire cutting, ceramics molding components, carbide punches, pins & bushes, profile grinding of mirror surface. Company's growth history: 2007 founded in Dongguan ..... 2014.9 Asiamold in Guangzhou 2014.11 Euromold in Germany 2015.4 Asiamold in Japan After 8 years of rapid development, we have become the most professional team with over 40 technical employees. Nowadays, we have a complete and scientific quality measurement system and advanced hi-tech production equipment. We pride ourselves on quality, which is our best selling point. product introduction 1 Item description 2 Name wire cut Die 3 Process Machine Grinding machine, Sodick Wire cut machine 4 Measuring instruments Projector, Toolmaker Microscope 5 Contour tolerance ±0.001 6 Profile tolerance ±0.002 7 Hole tolerance ±0.003 9 First trial place order Track service, anything is wrong, we will take immediate measures 10 Quotation Once receive RFQ, we will reply you in 2 hours 11 Delivery time 10-20 days after confirm the order 12 Material CF-H40S, RD30,RD50,ASP23, AF1,,etc. 13 Design Non-standard(according to customers' request), Standard 14 Minimum order Products are non-standard parts, one piece is acceptable. 15 Packing Carton, attached Quality Control report .