HI - Performance Syn. Enamel Paint
Superior Durability Color Pigment System
Easy To Apply By Brush , Roller And Spray
PRODUCT PARAMETERS
1. Type : Single Pack
2. Composite : Modified Oil Based Resin with Finest Bright
Pigments, Hydrocarbon solvent and addives
3. Use Recommended Thinner to make
Applicaon Viscosity
4. Applicaon Tools : Brushing, Spraying or
Roller
5. Flash off = 30 Minutes
6. Drying Time :
Surface Dry : 4 Hours
Hard Dry : Overnight
7. Curing Time : 72 hours
8. Over coang Interval : MIN : Overnight
MAX : 5 Days
9. Color : Assorted Shades
. Finish :
10 Smooth Finish
11 Thinner / Cleaner KISOMIN THINNER
12. Shelf Life: Up to 12 Months as long as the sealed containers
are kept under cover in a dry place under normal
temperature.
SCOPE
USES
Kisomin durable synthec enamel are long lasng & solvent based
paint used for wide range of surface.
Recommended as a decorave finish coat & can be applied on
surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden
surfaces like doors, Windows, Cabinets & wide range of furniture
FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protecon.
KEY ATTRIBUTES
* Applicaon temperatures : 10-44 degc
PERFORMANCE PROPERTY
Chemical Resistance
A Exposures Splash & Mild Fumes/Outdoor
Spillage Resistance
cid + +
Alkalis + +
Solvent NA NA
Salt ++ ++
Water +++ +++
Flexibility +++
Adhesion +++
Excellent : +++
Very Good : ++
Good : +
SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of
Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Sr the base thoroughly and then mix to uniform consistency.
Apply without thinning
Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�².
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information
Supplier: Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel
Supplier: Car paint, paint, paints coatings, wood coatings, epoxy, wood stainer, chemicals solvents, resin, white sprits non metallic minerals, dolomites, pigments, paint pigments, pigmnets for leather, pigments for textiles, pigments for metals, pigments for plastics, pigments for inks, wall putty, all types of virgin papers for all industries, kraft papers, color papers,etc, fork lifts, auto paint, epoxy floor paint, pu wood polish, nc sanding, emulsion paint, pva primer, washable silk paint, weather guard paint, eggshell paint
Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,
Supplier: Soda ash, urea 46 fertilizers, adblue, lead ingots, lead powder, npk fertilizers, rock phosphate, gypsum, base oil, white spirit, potassium chloride kcl, ammonium nitrate, ammonium sulphate, caustic soda, , triple super phosphate (tsp), potassium chloride (mop), diammonium phosphate (dap), sulphate of potash (sop), commercial epsom salt (ces), melamine, urea melamine formaldehyde, urea formaldehyde concentrate 85%, para formaldehyde 96%., iron ore
Services: General trading in raw materials, supply chain, contracting.
Buyer: Chemicals, petrochemicals
Supplier: Agricultural products (coffee, rice, black pepper, cocoa, cashew nuts, etc.)
garment/ medical product (non woven coveralls, gowns, medical face mask, arm cover, cap, shoes cover, bra, felt suit, towel, labor protection product)
plastic products, pe tarpaulin, pvc tarpaulin, jumbo bag, pp bag, rubber products
Supplier: Building & construction materials, minerals and chemicals, fly ash (astm c618 class f / bs en 450 / bs 3892), ggbfs / gbs, aggregates (crushed stones, stone chips), bentonite (drilling, pilling, foundry, construction), kaolin/china clay, salt/sodium chloride (industrial grade, food grade)
Services: Exports
