Gpmp Series Pulp And Paper Mill Pump

Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.

specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)

characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic

Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement

Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5

Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium

Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.

specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum

Industry Paperboard crush cutting machine
The paper board crush cutting machine is used for the end customers of corrugated box (color box), and it is used as the filling or cushioning material in the packaging in the manufacturing industry; Such as precision instruments, meters, electrical appliances, ceramics, glass, crafts, furniture and other industries. It can deal with irregular waste cardboard, unqualified cartons, color cartons and cartons, with or without printing, and can solve the thorny problems of enterprise managers. Paper products, recycling, no pollution sources; The state explicitly forbids "non degradable products" as filling materials, which can be used as substitutes for some chemical products.
Paperboard expanding and cutting machine features :
Green environmental protection. 2. Reduce cost. 3. Waste utilization. 4. Wide use.
Paperboard expanding and cutting machine advanced technology :
The paper board expanding and cutting machine uses German technology to provide you with high quality green packing and filling materials;
The unique technology turns the corrugated boxes that need to be discarded into "free" soft and fluffy green packing filling materials, and is used in the transportation packaging of fragile goods;
The main switch is also an emergency brake to ensure safety;
This product is widely used in packaging industry, transportation industry and parts processing industry. For example, motor manufacturers use fluffy paperboard as filler to facilitate logistics transportation;
Small space and easy operation;
A variety of specifications to choose from, with super large production capacity.
Welcome order! good price good quality !

Paperboard expanding and cutting machine,
The paper board expanding and cutting machine is used for the end customers of corrugated box (color box), and it is used as the filling or cushioning material in the packaging in the manufacturing industry; Such as precision instruments, meters, electrical appliances, ceramics, glass, crafts, furniture and other industries. It can deal with irregular waste cardboard, unqualified cartons, color cartons and cartons, with or without printing, and can solve the thorny problems of enterprise managers. Paper products, recycling, no pollution sources; The state explicitly forbids "non degradable products" as filling materials, which can be used as substitutes for some chemical products.
Paperboard expanding and cutting machine features :
Green environmental protection. 2. Reduce cost. 3. Waste utilization. 4. Wide use.
Paperboard expanding and cutting machine advanced technology :
The paper board expanding and cutting machine uses German technology to provide you with high quality green packing and filling materials;
The unique technology turns the corrugated boxes that need to be discarded into "free" soft and fluffy green packing filling materials, and is used in the transportation packaging of fragile goods;
The main switch is also an emergency brake to ensure safety;
This product is widely used in packaging industry, transportation industry and parts processing industry. For example, motor manufacturers use fluffy paperboard as filler to facilitate logistics transportation;
Small space and easy operation;
A variety of specifications to choose from, with super large production capacity.
Welcome order! good price good quality !

Water Pump suitable for Commercial vehicles,Cars

Colloidal mill machine is a mechanical equipment that uses a combination of shearing, grinding, and high-frequency vibration to finely grind and homogenize materials. Its core components consist of stainless steel dynamic and static grinding discs, which achieve material refinement through high-speed relative motion.
Use for :
Food industry: homogenization of dairy products, grinding of chocolate, emulsification of jam/peanut butter, processing of bone paste, etc.
Chemical industry: pigment dispersion, lubricant homogenization, emulsified asphalt preparation, etc.
Pharmaceutical industry: ointment mixing, vaccine emulsification, oral liquid homogenization, etc.
Daily chemical industry: cosmetics emulsification, toothpaste grinding, detergent dispersion, etc.
Other fields: dispersion of architectural coatings, pulp processing in the paper industry, crushing of lithium battery base materials, etc.
Capacity are different . Capable of high rotational speed (such as 14000rpm) and ultra refinement (particle size 5-10 m)
Welcome cooperate!

pellet machine, with the advantages of low noise, easy and stable operation,
high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing.

Features :
1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily.
2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding.
3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain.
4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines.
5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.