Roller Hearth Kiln Furnace

Bogie Hearth Furnace Manufacturers - We offer Bogie Hearth Furnace suitable for the heat treatment of large loads. JR has a full range of Bogie Hearth type Heat Treatment Furnaces.

Rotary Hearth Furnace Based Pig Iron

This is the Latest Technology to Produce the Pig Iron or MS Iron out of the Iron Ore Fines and Non-coking Coal.

In this Technology, the Coal Consumption is the minimal as compared to the Tunnel Kiln Process or Rotary Kiln Process.

Through RHF, either Pig Iron (Fe=96-97% C=3.0-4.0%) or MS Steel (Fe=99% C=0.2% Mn=0.3% etc) or HBI (Hot Briquetted Iron) (Fe=92% C=0.25%) can be made, depending upon the requirement.

The entire time for the Reduction, Melting and Product Out will be around 45 min, so the larger capacity of the Plants can be made.

This process is also Lowest Space Consuming Plant.

The Best Part of this Technology is that we can Product the Ferro Alloys too, like Ferro Nickel (Fe-Ni), Ferro Chrome (Fe-Cr) or Ferro Vanadium (Fe-V) etc from the same Plant, by implementing different Parameters of Operations.

We can Control the Low Carbon Ferro Chrome, MS Steel and many more.

Lucy.Li at jsmsinudstry dot com
1.Products including: furance rolls. The od from min.50mm to max.1600mm. The shells are produced by centrifugal castings.

2.Application: the various furnace rollers are used in the furnaces for steel mills, like cal(continuous annealing line),
Cgl(continuous galvanizing line).It is characteristic of heat resistant, corrosion resistant and wear resistant,

3.Material for centrifugal barrels: 24/24nbtz, g18/8nicr, 28cr/48ni/5w, 25cr/20ni, 24/24nicrnb(1.4855),
25cr/35ni(1.4852), 38ni/18cr(1.4865), 2.4633, 2.4879 or at customers request.
Forged shafts: 310 stainless steel, en8, en24 etc.

4.Welding consumables: aws a5.11 nicrfe-3 2.4807 or 182ks or as per the buyer's requirements

5.Working temperature: depending on the materials(average: 800-1200¡æ)

4.Quality control:
We carry out very strict quality control from raw material to each step of the process, until the finished product is dispatched. To make sure the highest quality possible, each test is carried out strictly with our in-house testing facilities. The most generally used methods of testing given below:
Chemical analysis by spectrometer
Mechanical tests in normal and high temperature.
Ultrasonic, x-ray, dye penetrant test.
Boroscope; eddy current testing; microscope ; pressure tests.


Furance rolls. The od from min.50mm to max.1600mm.

Parameters

Applicable to: calcination of LFP, LiFePO4, polyanions

Maximum temperature: 800 â??

Furnace cavity dimenison: W2170Ã??H400Ã??L90000mm Max.L=100m

Furnace atmosphere: N2

Features of 6-Tube Nitrogen Roller Furnace
6-tube roller furnace - the 6-tube double-layered furnace delivers the maximum output.

Flat top structure - low furnace cavity reduces heat loss.

Insulation - Insulation cotton is used for furnance to reduce energy consumption.

Uniform temperature - advanced thermal layout, multiple heating measures, and �±3�°C uniformity (6 rows of double layers).

Preheating - Preheating before coming through the bottom inlet to improve the atmosphere and temperature uniformity in the furnace.

Circulation cooling - tail circulation cooling system, smaller nitrogen consumption and stronger cooling effect.

As a tube equipment corporation, we will do our best to meet all the needs of customers.

We can also offer kinds of pipe material handling equipment for sale. If you are interested, please leave us a message.

4-Row Nitrogen in Food Industry

Parameters

Applicable to: Firing of anode materials (graphite, silicon carbon, silicon oxygen, hard carbon, etc.)

Maximum temperature: 1350â??

Furnace Cavity Dimension: W1520Ã??H250Ã??L50000mm, Max.L=100m

Furnace atmosphere: N2

Features of 4-Row Nitrogen Mixer Roller Furnace for Anode
Vault Structure - the exhaust gas is gathered at the top, which helps the waste gas to be discharged out of the furnace quickly and reduces the residual alkali content;

Anti-Corrosion Material of Furnance: The heating section uses corundum bricks, which are highly dense and tar carbon errosion-resistant, ensuring the safety of the kiln;

Protection for Silicon Carbide Rod - Quartz tubes and high-density corundum tubes are used to prevent arcing;

Effective Glue Discharge - Large-diameter glue discharge outlet, backflow main pipe and pipeline insulation and heating to prevent tar adhesion;

Preheating - preheating before coming through bottom inlet to eliminate dead air in the furnace and improve the uniformity of atmosphere and temperature in the furnace;

Waste Gas Incineration - Multi-stage incinerator disposes tar completely.

Now the price of gas powered roller, row roller and small tube roller furnance is reasonable, anything you need, please contact us.

As an anode systems company, we can provide kinds of nitrogen dosing system, nitrogen dryer system for sale. If you are interested, please leave us a message.

For more types of automated storage and retrieval system in logistics, please visit our website.

Zhejiang MESNAC Intelligent Technology Co., Ltd. specializes in the R&D and manufacturing of pneumatic conveying, dosing, mixing and slurrying systems for powder and granular materials, as well as solid and liquid two-phase flow customized systems. Based on material handling, MESNAC has been engaged in Intelligent Equipment, Material Handling System, Intelligent Supporting Service as its core, achieving integrated development in such multiple fields as lithium-ion battery production, battery material production, chemicals, food, pharmaceuticals. From material storage to transfer, from dust-free unpacking system to high-precision conveying system, from recipe management to production control, MESNAC commits itself to providing flexible and intelligent turnkey solutions for customers in various industries, becoming a leading brand in material handling at home.

Mesh Belt Type Furnace is designed to load the product on the mesh belt and make continuous production. It is used in various processes, including plastic working, firing, drying and degreasing, for a variety of production. Using the muffle, Mesh Belt Furnace offers stable ambient control, rapid heat-up time and radiating energy saving. It is designed to implement continuity of automated production system and uniform production based on ambient per zone and temperature control.

Pusher Furnace, a representative equipment in the firing process, is designed to push the conveyor using the pusher to move the product. It is used for the firing process of various types of products and it shows excellent heat resistance, insulation efficiency and wear resistance against the conveyor. Designed as a tunnel type, Pusher Furnace implements continuity of automated production system and uniform production based on ambient per zone and temperature control.

Batch Type Furnace can be comprised of several types, such as rack, roller or elevator, and pre-process product input and post-process product output is made in 1 cycle.
Batch Furnace is used for plastic working, firing, drying and degreasing of various products.
Unlike the continuous furnace, it can be installed in an independent location, with advantages of convenient layout and excellent price competitiveness.