Directview Max Cr System

Most Innovative Technology, to Produce the Ferro Alloys, in the Furnace, which is utilizing the Coal Gas or Natural gas rather than utilizing the Expensive electricity and its consumption.

In this Technology, the Gas is used to Produce the Ferro Alloys like Ferro Manganese (Fe-Mn), Silico Manganese (Si-Mn), Ferro Chrome (Fe-Cr) and many more.

This Technology is the Replacement of EAF (Submerged Electric Arc Furnace), which is Power Hungry in its own. We can produce the Low Carbon Products as well, from the same Plant, by lancing the Oxygen through the System.

Extraction Arms- Local extraction system for a clearer working environment. Installation of fume extraction systems at the source of the pollution during the working processes prevent the spread of polluted air into the surroundings. The arms are connected to a vacuum fan and filter device removing the contaminants from the extracted air so that it can be exhausted to the atmosphere. A local extraction system is the best solution for a clean working environment. -Easy operationsENSHINE extraction arms are easy to remove and position. The extraction arm is easy to adjust for capturing the source of the pollution during the work processes. Additional, the extraction arms are quickly mounted with different brackets for wall, ceiling or table. -AdvantagesCan be wall, bench or ceiling mounted, and connected with ENSHINE filtration systems.ENSHINE extraction arms are easy to adjust for workers wanting to capture fume or dust smoke at source.A wide range of accessories give unlimited possibilities to match the needs at any workplaces and to help extraction work more efficient.Solid structure and easy to be folded out when not in use. -Material VersionsENSHINE extraction arms are available in two material versions, aluminum (AL) and chemical resistant plastic (CR). The choice of material version depends on work environment and type of pollution.Chemical Resistant Plastic (CR)ENSHINE chemical resistant extraction arms are suitable for work areas with special requirements for chemical resistance. The CR extraction arm consists of PVC tubes and joints of red Polypropylene.Aluminum (AL)ENSHINE aluminum extraction arms are suitable for environments with no special demands for chemical resistance or insulation. The AL extraction arm consists of aluminum tubes and joints of red Polypropylene. -ApplicationsENSHINE range of extraction arms covers a wide variety of applications as following.LaboratoryVocational schoolChemical industry UniversityPharmaceutical industry Laser techniquesFood industry Eliminate smoke, gas, dust, and particles

Max turning dia.---1600 mm
Workingtable dia.---1400 mm
Max height of workpiece --- 1000 mm
Max weight of workpiece --- 5 t
Main motor power ---30 kw
Net weight of machine ---12 t
Cnc system --- fanuc 0.

Drilling and cutting process on the part of the same job
Auto tool cooler and oil system.
Industrial CNC control 15 Touch screen Panel
Lineer sliding bridge and Helix Rocks Propulsion System.
Drilling capacity : Min. M5 Max. M32 (HSS,UDRILL)
Drilling Depth : 100 mm. Max.
Drilling tool speed : 70-110 m/min.
Drilling speed : 0.15-0.35 mm/rev.
Spindell speed : 1500 RPM Max.
CNC Positioning Accuracy : 0,02 mm.
Max. (X&Y) Positioning speed : 15000 mm./min.
Bridge movement control : Dual Gantry AC Servo Drives.

Working size is 2000*3000*150mm,cutting marble max to 100mm,with Japan servo motor,CNC control system and USA UHP pump.

1500kgs and one 20' container

Item:yb-25t
Baling volume(l*w*h):900*600*900 mm
Working pressure max.:250 kn
System oil pressure max.:10 mpa
Motor power:7.5-11 kw
Cylinder(quantity*diameter of cylinder):1/150 mm
Overall dimension max:1520*1140*3130 mm
Overall weight:1680 kg



Item:yb-25t
Baling volume(l*w*h):900*600*900 mm
Working pressure max.:250 kn
System oil pressure max.:10 mpa
Motor power:7.5-11 kw
Cylinder(quantity*diameter of cylinder):1/150 mm
Overall dimension max:1520*1140*3130 mm
Overall weight:1680 kg

Electro-hydraulic servo fatigue testing machine is customized according to the customer's program of oscillating sintering furnace, the mainframe is in the form of high-rigidity four-column structure installing the oscillating sintering furnace .The system is equipped with 200KN dynamic servo actuator, which can meet the requirements of the maximum frequency of 50HZ and the amplitude of 0.3mm. The testing machine is mainly used in various sizes of metal and non-metallic materials of tensile and pressure fatigue sintering mechanical property testing, but also for kinds of structural specimens of tensile and pressure fatigue testing.
The max load stiffness is 5GN/m and elegant appearance.
Flux is 60L/min, max pressure is 22MPaï¼?max frequency is 50Hz, amplitude is 0.3mm, max dynamic-static thrust is 200KN, max frequency is 50Hz, max displacement 150mm,minimum dynamic thrust is 20KN, max frequency 50Hz

Year of manufacture: 1984

Specification:-
Min size of bags: 75 - 100 mm
Max size of bags: 340 - 710 mm
Web guide system: FIFE
Photocell system
Max. Speed: 220 bags/ min
Air shafts
In production: yes

Immediately available.
Inspection on prior appointment.

Information is given by the source, which deemed reliable.
Availability is subject to prior sales.

32 Tons Friction Welding Machine

Usage: AL-Cu welding
Max Upset force: 320KN
Max Spindle speed: 400rpm
Welding Diameter: 20mm-55mm
Clamping length of rotation fixture: up to 200mm
Clamping length of movement fixture: 20mm-250mm
Max stroke of work table: 320mm
Time of friction: 0-99s
Upset time: 0-99s
Upset speed: 0-20Sec
Upset speed: 20-30Sec
Main motor: 55KW
Hydraulic motor: 18.5KW+0.55KW
Dimension: L340W120H1500
Weight: 6800kg
Main parts of the whole machine: Hydraulic supply system, main welding machine, power supply control system