Nc Indexing Rotary Tables

JG56 series NC Indexing Rotary Tables

Application
Suitable for boring machine, milling machine and machining center to carrying out equal division (the spare parts).

Remarks

1. Standard table sizes are from 630mm~1000mm, others also can be produced according to the customer drawings.

2. Table top could be round or square per your requirements.

3. The motor should be prepared by customers themselves.

ID(Inner diameter):50mm

OD(Outer diameter):126mm

Thickness(Height):30mm

Axial dynamic load rating(Ca):38KN

Axial static load rating(Coa):158KN

Raial dynamic load rating(Cr):28.5KN

Raial static load rating(Cor):49.5KN

Limiting speed:600r/min

Bearing friction torque:2.5Nm

Mass(Weight):1.6KG

YRT basic rotary table Bearings are designed with a radial full roller, two groups of axial needle Roller, cage assembly, an out ring, a L-section Inner ring and the second ring. the out ring and inner ring have fixing holes. Added preload after fitting simplified the unit construction,Shorten the work of fixing, Lowered the high on fixing. so this kind of bearing is particularly suitable for the situatin of High precision, high stiffness and the Union loads with low speed such as index tables and revolving milling heads.See Fig

*this kind of Bearing have axial and radial running precision for your chosen.(HONBbearing05)

ID(Inner diameter):50mm

OD(Outer diameter):126mm

Thickness(Height):30mm

Axial dynamic load rating(Ca):38KN

Axial static load rating(Coa):158KN

Raial dynamic load rating(Cr):28.5KN

Raial static load rating(Cor):49.5KN

Limiting speed:600r/min

Bearing friction torque:2.5Nm

Mass(Weight):1.6KG

YRT basic rotary table Bearings are designed with a radial full roller, two groups of axial needle Roller, cage assembly, an out ring, a L-section Inner ring and the second ring. the out ring and inner ring have fixing holes. Added preload after fitting simplified the unit construction,Shorten the work of fixing, Lowered the high on fixing. so this kind of bearing is particularly suitable for the situatin of High precision, high stiffness and the Union loads with low speed such as index tables and revolving milling heads.See Fig

*this kind of Bearing have axial and radial running precision for your chosen.(HONBbearing05)

ID(Inner diameter):50mm

OD(Outer diameter):126mm

Thickness(Height):30mm

Axial dynamic load rating(Ca):38KN

Axial static load rating(Coa):158KN

Raial dynamic load rating(Cr):28.5KN

Raial static load rating(Cor):49.5KN

Limiting speed:600r/min

Bearing friction torque:2.5Nm

Mass(Weight):1.6KG

YRT basic rotary table Bearings are designed with a radial full roller, two groups of axial needle Roller, cage assembly, an out ring, a L-section Inner ring and the second ring. the out ring and inner ring have fixing holes. Added preload after fitting simplified the unit construction,Shorten the work of fixing, Lowered the high on fixing. so this kind of bearing is particularly suitable for the situatin of High precision, high stiffness and the Union loads with low speed such as index tables and revolving milling heads.See Fig

*this kind of Bearing have axial and radial running precision for your chosen.(HONBbearing05)

YRT120 Rotary Table Bearing

Product Model: YRT120
Structure: rotary table bearing
Inside Diameter:120 mm
Outside Diameter: 210 mm
Thickness: 40mm
Material: 50Mn, 42CrMo

YRT120 bearing can be used to the machine tool and other high precision machinery of the rotary table or sub-set,and also can be used for chuck,measuring instruments and test equipment and rotary table configuration.This bearing requires higher quality or the parts to match it.You must control screw tightening torque when install it.

YRT50 Rotary Table Bearing

Product Model: YRT 50
d: 50mm
D:126mm
H: 30mm
axial dynamic load: 38kn
axial static load: 158kn
radial dynamic load: 28.5kn
radial static load: 49.5kn

YRT50 bearing can be used to the machine tool and other high precision machinery of the rotary table or sub-set, and also can be sued for chuck, measuring instruments and test equipment and rotary table configuration.

YRT precision rotary table bearing is a kind of bearing fixed by a bidirectional thrust bearing and a centripetalguided bearing. They can support radial loads, axial loads from both directions and tilting moments free from clearance and are particularly suitable for bearing arrangements with high requirements for running accuracylike rotary tables, millings heads and reversible clamps.Due to the fixing holes in the bearing rings, the units are very easy to fit. The bearings are radially and axially preloaded after fitting.

Bearing features:
1.High precision: precision at P4, P2.
2.High rigidity: YRT series bearings are with preload.
3.High load capacity: bearings can support axial load, radial load and tilting load.
4.High speed: YRTS series bearings can be applied in the high speed working condition

Sealing/Lubricant:
YRT bearings are supplied with seals. YRT bearings are greased by a lithium complex soap grease and can be lubricated via the outer ring and L-section ring.

Operating temperature:
YRT bearings are suitable for operating temperatures from 30 to 120.

YRT80 Rotary Table Bearing

Product Model: YRT80
d:80mm
D:146mm
H:35mm
inner ring fixing holes: 10
outer ring fixing holes: 12

YRT80 bearing consists of thrust/radial housing washer,a thrust/radial shaft,two Axial needle roller and cage assemblies and a group of radial cylindrical roller.Housing washer and shaft washer have equally sspaced fitting bolt.This kind of bearings have high axial load and radial load,and high tilting rigidity and high precision.

Yrts460 rotary table bearing

Product model: yrts460
D:460mm
D:600mm
H:70mm
Inner ring fixing holes: 46
Outer ring fixing holes: 45

Yrts460 bearing consists of thrust/radial housing washer, a thrust/radial shaft, two axial needle roller and cage assemblies and a group of radial cylindrical roller.Housing washer and shaft washer have equally sspaced fitting bolt.This kind of bearings have high axial load and radial load, and high tilting rigidity and high precision.

-

Yrts325 rotary table bearing

Product model: yrts325
Structure: rotary table bearing
Inside diameter:325 mm
Outside diameter: 450mm
Thickness: 60mm
Material: 50mn, 42crmo

Yrts325 bearing can be used to the machine tool and other high precision machinery of the rotary table or sub-set, and also can be used for chuck, measuring instruments and test equipment and rotary table configuration.This bearing requires higher quality or the parts to match it.You must control screw tightening torque when install it.

-