Centrifugal Slurry Pump

Slurry pump is a kind of centrifugal pump to transport slurry materials under the centrifugal force. It transfer the electricity energy into kinetic and position energy. It is widely applied in mine, electricity, metallurgy, coal and environmental protection for abrasive solid containing slurry transportation. It can also be used to transport some corrosive slurry with crystals.

Series lmh slurry pump is mainly used for handling strong abrasive, high density slurries in the metallurgy, mining, coal washery, power plant, building materials and other industries etc.

This series of slurry pumps have replaceable wear-resistant metal liners. Its wet parts are with throat bush, impeller, an be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pumps may be installed in multistage series to meet the delivery of long distance.

can offer replacement KSB slurry pump impellers, the KWPK 65-315 impeller used on KSB KWP Non-clogging Centrifugal Pump, it is a closed non-blocking multi-vane impeller impeller.
pumps are Horizontal, single-stage, radially split volute casing types with heavy-duty back pull-out, non clogging impeller design for industrial applications, they have either multi-vane impeller (K), free-flow impeller (F) or open multi-vane impeller (O), the pumps are not self-priming.

K type impeller - Closed non-blocking impeller. It is suitable for transporting clean water, sewage, and solids-containing media. The medium should not contain solids that are particularly easy to adhere and easy to entangle (such as extra long fibers or coarse rubber particles).

Description

Horizontal slurry pump range offer to use in mining, chemical, and industrial applications widely. The pump is designed
for heavy duty applications such as mill discharge, process plant, and tailings, high pressure pipelines, as well as other specialty applications.

The pump provides excellent wear life while maintaining high efficiency during its wear cycle. It helps the new building
plant to start production and recover their cost in a short time with the minimum investment.

Not only our own brand slurry pumps but also it could be interchangeable with other brands on spares and whole pumps.
We have stock on some regular spares. It saves the users' cost on stock and increases their supply chain's efficiency.

Key Features

Bearing assembly - The large diameter shaft with famous brand bearings contributes to long working life. 

Liners-Easy to replace and maintain. Hard metal liners are completely interchangeable with rubber or PU.

Casing-Cast iron or ductile iron casing provide high operating pressure capabilities and extra protection on the safety.

Impeller-Hard metal and moulded elastomer impellers are completely interchangeable with each other. High efficiency
and high head designs are also available. And the arge particle is easy to pass through.
FAQ:

1. Are your pump and spares interchangeable with other brands?
Yes. 100% interchangeable, whatever the material, working life and working efficiency.

2. What price of your pump and spares?
Our price is 30~50% of the original but the same working life.

3. What is your lead time?
Some popular spares are in stock which could deliver within 5 days after your PO.
If without stock, we could deliver within 3 weeks.

4. What is your warranty?
One year for the whole pump except the wear parts.
The working life of wet parts is the same as the most famous brand.

5. Do you have OEM service?
Yes. We offer OEM service to our clients.
And our engineers could train the users on site how to start, use and maintain the pumps.

Slurry pump
Slurry pump is contain cantilever and horizontal centrifugal pumps, which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, buliding etc.This kind of pump can be used in multi stages.Pump body consist of replaceable metal or rubber lining and its impeller is made of wear resistant metal or rubber.The shaft seal of pump may adopt packing seal centrifugal.

Contact us
 company:shijiazhuang ruite pump co., ltd.


-

Slurry pumps
Range (discharge):1-18inch
2. Capacity: 10-5400 m3/h
¡¡3. Head: 5-125m
¡¡4. Impeller type: non-clog (open &close)
5. Shaft sealing: packing/gland packing & mechanical
¡¡6. Wet parts material: a05, a07, rubber,

3) slurry pump general features: 1. Xiyue brand xh/xhh slurry pumps are heavy duty pumps. They are cantilevered, horizontal,
Centrifugal slurry pumps. Especially they are designed for most difficult pumping applications.
2. Xiyue xhh models are designed for heavy duty applications require high head per stage at high pressures. It is suitable for long distance transporting or where others require more than one pump in series.
¡¡3. Xiyue xh models display total interchangeability between hard metal and
¡¡¡¡elastomeric liner pumps.
4. They are mainly used in: power plant, chemical process, coal, heavy minerals, paper and pulp, mill discharge, lime grinding, bottom boiler fly, ash cyclone feed, slag granulation, suction hopper dredging, barge loading, sand reclamation ect.
¡¡¡¡¡¡

4) slurry pump structure features: 1. Xiyue xh/xhh pumps are single stage, single suction, and overhang shaft, centrifugal,
¡¡¡¡double-casing horizontal type. Wet parts are made of abrasive resistant hard metal or rubber.
¡¡2. Bearing assembly use cylindrical structure, adjusting the space between impeller and
¡¡¡¡front liner easily, being removed completely when being repaired.
¡¡3. Bearing assembly uses grease lubrication.
¡¡4. The shaft seal could use the packing seal, expeller seal and mechanical seal.
¡¡5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented
¡¡¡¡to any eight positions to suit installations and applications.
¡¡¡¡
Material construction
Pump body: cast iron/grey iron


Wooden box

As a premium slurry pump manufacturer, we are committed to providing customers with pumps that
fully meet ISO9001. Our supeior capabilities and competitive strengths are ideally placed to supply the optimum all kinds of slurry pumps for your business. These pumps can be driven by electric  or diesel.

Tech-macro AH series Pump Specification:
Size range (discharge) :  1 inch to 18 inch (25 mm to 450 mm )
Capacities:    to 5,000 m3/hr (to 22,000 gpm)
Heads(TDH):  to 73 m (to 240 feet)
Hard metal slurry pump is successfully applying the range within a wide variety of market sectors and applications; a few of which are specified below:
Mining and mineral processing
Power generation and steel
Aggregate and mineral slurries; mineral and ore processing; cyclone feed and under-flow; tailings disposal; lime and clay slurries; classifier under-flow; dewatering, washdown and sluicing; high density slurries and sludges; highly abrasive solids in suspension; coal preparation; coal and ash slurries; metal waste separation/Recovery
Industrial effluents and liquors
All abrasive slurries and sludges; abrasive chemical and process liquors; hard solids entrained liquors; sand filter recovery; beach(sand) recovery/ dispersal.

3/2C-AH Slurry Pump is a heavy-duty slurry pump that designed to handle the most abrasive and dense slurries. The 3/2C-AH slurry pump offers users a wide range of seal and liner configurations, allowing the pump to be fully customized to meet any specific application requirements. 3/2C-AH slurry pumps offer unmatched power consumption, long component life, and unmatched reliability.

Tobee�® 3/2 C AH Slurry Pumps Performance Parameters:

Size: 3" x 2"
Capacity: 39.6-86.4m3/h
Head: 12-64m
Speed: 1300-2700rpm
NPSHr: 4-6m
Eff.: 55%
Power: Max.30kw
Handling solids: 25mm
Seal arrangement: Packing seal, Expeller seal, Mechanical seal

Tobee Slurry pumps are recommended for pumping liquids containing small or large suspended solids. They are designed for continuous pumping of highly abrasive and corrosive slurry. The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry.

Tobee�® 4-3C-AH Slurry Pump for Cleaning coal thickening cyclone, Cyclone underflow pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy.


Tobee�® 4x3C AH Slurry Pump SPECIFICATIONS:

Size: 4" x 3"

Capacity: 86.4-198m3/h

Head: 9-52m

Speed: 1000-2200rpm

NPSHr: 4-6m

Eff.: 71%

Power: Max.30kw

Handling solids: 28mm

Materials: A05, A07, A33, A49, A51, A61, R08, R26, R55, U01 U38 etc